watchdog: move WATCHDOG_TIMEOUT_MSECS to Kconfig

[J-u-boot.git] / arch / arm / cpu / armv8 / fsl-layerscape / doc / README.lsch2

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2
index 9583bf743ee8a6aeaae52fc4e8bd2523ef8defa3..d7f7b9f1110150026cd6cfeb9f74a9797ce9a9d9 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2
@@ -16,6 +16,5 @@ You can enable it by setting CONFIG_IMX_WATCHDOG.
 Use following config to set watchdog timeout, if this config is not defined,
 the default timeout value is 128s which is the maximum. Set 10 seconds for
 example:
-    #define CONFIG_WATCHDOG_TIMEOUT_MSECS 10000
 Set CONFIG_WATCHDOG_RESET_DISABLE to disable reset watchdog, so that the
 watchdog will not be fed in u-boot.