nxp: Migrate a number of DDR related symbols to Kconfig

[J-u-boot.git] / include / configs / P1010RDB.h

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index fc74d57497e5e6ad51f4338a364f6a86f35cdb94..952896156d275af8343b6a15690717b6ae0b3502 100644 (file)
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -150,40 +150,9 @@
 #define CONFIG_SYS_PCIE2_IO_PHYS       0xffc10000
 #endif
 
-#if !defined(CONFIG_DM_PCI)
-#define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
-#define CONFIG_SYS_PCIE1_NAME          "mini PCIe Slot"
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_MEM_BUS       0x80000000
-#else
-#define CONFIG_SYS_PCIE1_MEM_BUS       0x80000000
-#endif
-#define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
-
-#if defined(CONFIG_TARGET_P1010RDB_PA)
-#define CONFIG_SYS_PCIE2_NAME          "PCIe Slot"
-#elif defined(CONFIG_TARGET_P1010RDB_PB)
-#define CONFIG_SYS_PCIE2_NAME          "mini PCIe Slot"
-#endif
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_MEM_BUS       0xc0000000
-#else
-#define CONFIG_SYS_PCIE2_MEM_BUS       0xa0000000
-#endif
-#define CONFIG_SYS_PCIE2_MEM_SIZE      0x20000000      /* 512M */
-#define CONFIG_SYS_PCIE2_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
-#endif
-
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #endif
 
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_DDR_CLK_FREQ    66666666 /* DDRCLK on P1010 RDB */
 #define CONFIG_SYS_CLK_FREQ    66666666 /* SYSCLK for P1010 RDB */
 
 #define CONFIG_HWCONFIG
@@ -198,7 +167,6 @@
 
 /* DDR Setup */
 #define CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM         1
 #define SPD_EEPROM_ADDRESS             0x52
 
@@ -527,38 +495,19 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
 /* I2C */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_FSL_I2C_SPEED       400000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED      400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER  0
-#endif
 #define I2C_PCA9557_ADDR1              0x18
 #define I2C_PCA9557_ADDR2              0x19
 #define I2C_PCA9557_BUS_NUM            0
-#define CONFIG_SYS_I2C_FSL
 
 /* I2C EEPROM */
 #if defined(CONFIG_TARGET_P1010RDB_PB)
-#define CONFIG_ID_EEPROM
 #ifdef CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #endif
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
 #define CONFIG_SYS_EEPROM_BUS_NUM      0
 #define MAX_NUM_PORTS                  9 /* for 128Bytes EEPROM */
 #endif
 /* enable read and write access to EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
 /* RTC */
 #define CONFIG_RTC_PT7C4338
@@ -638,7 +587,6 @@ extern unsigned long get_sdram_size(void);
  */
 #if defined(CONFIG_SDCARD)
 #define CONFIG_FSL_FIXED_MMC_LOCATION
-#define CONFIG_SYS_MMC_ENV_DEV         0
 #elif defined(CONFIG_MTD_RAW_NAND)
 #ifdef CONFIG_TPL_BUILD
 #define SPL_ENV_ADDR           (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
@@ -746,7 +694,7 @@ extern unsigned long get_sdram_size(void);
        "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
 #endif
 
-#define CONFIG_RAMBOOTCOMMAND          \
+#define RAMBOOTCOMMAND         \
        "setenv bootargs root=/dev/ram rw "     \
        "console=$consoledev,$baudrate $othbootargs; "  \
        "tftp $ramdiskaddr $ramdiskfile;"       \
@@ -754,7 +702,7 @@ extern unsigned long get_sdram_size(void);
        "tftp $fdtaddr $fdtfile;"               \
        "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
+#define CONFIG_BOOTCOMMAND RAMBOOTCOMMAND
 
 #include <asm/fsl_secure_boot.h>