arm: bcmbca: add bcm63146 SoC support

[J-u-boot.git] / configs / T2080QDS_SRIO_PCIE_BOOT_defconfig

diff --git a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
index db09d3b92e318bedb40743a2cdf190af815d9f1a..f3c0b93dabd8377d3e8703724eefecbf6c8067d2 100644 (file)
--- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
+++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
@@ -2,26 +2,39 @@ CONFIG_PPC=y
 CONFIG_SYS_TEXT_BASE=0xFFF40000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
 CONFIG_SYS_TEXT_BASE=0xFFF40000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="t2080qds"

+CONFIG_ENV_ADDR=0xFFE20000
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T2080QDS=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_BOOK3E_HV=y
+CONFIG_SYS_CACHE_STASHING=y
+CONFIG_SRIO_PCIE_BOOT_SLAVE=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
+CONFIG_PCIE4=y

 CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_VID=y
 CONFIG_VID_FLS_ENV="t208xqds_vdd_mv"
 CONFIG_VOL_MONITOR_IR36021_READ=y
 CONFIG_VOL_MONITOR_IR36021_SET=y
 CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_VID=y
 CONFIG_VID_FLS_ENV="t208xqds_vdd_mv"
 CONFIG_VOL_MONITOR_IR36021_READ=y
 CONFIG_VOL_MONITOR_IR36021_SET=y

-CONFIG_MPC85xx=y
-CONFIG_TARGET_T2080QDS=y
-CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_SYS_FSL_NUM_CC_PLLS=2
+CONFIG_FSL_QIXIS=y
+# CONFIG_QIXIS_I2C_ACCESS is not set

 CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y

-CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE"

 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"

+CONFIG_ARCH_MISC_INIT=y

 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y

+CONFIG_SYS_PBSIZE=276

 CONFIG_CMD_GREPENV=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_I2C=y
 CONFIG_CMD_GREPENV=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_I2C=y


@@ -35,10 +48,15 @@ CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_REMOTE=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_REMOTE=y

-CONFIG_ENV_ADDR=0xFFE20000
-CONFIG_DM=y
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="FM1@DTSEC3"
+CONFIG_FSL_SATA_V2=y
+CONFIG_SYS_SATA_MAX_DEVICE=2

 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y

+CONFIG_DIMM_SLOTS_PER_CTLR=2

 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
 CONFIG_DM_I2C=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
 CONFIG_DM_I2C=y


@@ -77,6 +95,7 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_FSL=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_FSL=y

+CONFIG_USB_MAX_CONTROLLER_COUNT=2

 CONFIG_USB_STORAGE=y
 CONFIG_ADDR_MAP=y
 CONFIG_SYS_NUM_ADDR_MAP=64
 CONFIG_USB_STORAGE=y
 CONFIG_ADDR_MAP=y
 CONFIG_SYS_NUM_ADDR_MAP=64