configs: Resync with savedefconfig

[J-u-boot.git] / configs / imx28_xea_defconfig

diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig
index e23d77d9f829704202b8eab364b45039faedb760..70babb25bfa999a6d025aaee55c5927dbf826f5a 100644 (file)
--- a/configs/imx28_xea_defconfig
+++ b/configs/imx28_xea_defconfig
@@ -9,6 +9,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x800
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
+CONFIG_SPL_TEXT_BASE=0x1000
 CONFIG_TARGET_XEA=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
@@ -18,10 +19,12 @@ CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x90000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0x1000
 CONFIG_SPL_PAYLOAD="u-boot.img"
+CONFIG_DEFAULT_DEVICE_TREE="imx28-xea"
 CONFIG_FIT=y
 CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyAMA0,115200n8"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
@@ -30,10 +33,11 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0
 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y
 CONFIG_SPL_DMA=y
-CONFIG_SPL_FORCE_MMC_BOOT=y
 CONFIG_SPL_MMC_TINY=y
+CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_SPL=y
 CONFIG_CMD_ASKENV=y
@@ -57,7 +61,6 @@ CONFIG_MTDPARTS_DEFAULT="spi3.0:64k(SPL),448k(uboot),128k(envs),384k(unused1),40
 CONFIG_DOS_PARTITION=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="imx28-xea"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent interrupts"
 CONFIG_SPL_OF_PLATDATA=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y