imx: tpc70: led: Enable LED default state

[J-u-boot.git] / include / dfu.h

diff --git a/include/dfu.h b/include/dfu.h
index 7e0a99908ca426b9ad4053a6deb75370d15497b7..145a1576a3e9e889050c27dbb63e1a56d6ad52aa 100644 (file)
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * dfu.h - DFU flashable area description
  *
  * Copyright (C) 2012 Samsung Electronics
  * authors: Andrzej Pietrasiewicz <[email protected]>
  *         Lukasz Majewski <[email protected]>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __DFU_ENTITY_H_
@@ -81,7 +80,6 @@ struct sf_internal_data {
 };
 
 #define DFU_NAME_SIZE                  32
-#define DFU_CMD_BUF_SIZE               128
 #ifndef CONFIG_SYS_DFU_DATA_BUF_SIZE
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE           (1024*1024*8)   /* 8 MiB */
 #endif
@@ -110,7 +108,7 @@ struct dfu_entity {
                struct sf_internal_data sf;
        } data;
 
-       long (*get_medium_size)(struct dfu_entity *dfu);
+       int (*get_medium_size)(struct dfu_entity *dfu, u64 *size);
 
        int (*read_medium)(struct dfu_entity *dfu,
                        u64 offset, void *buf, long *len);
@@ -132,7 +130,7 @@ struct dfu_entity {
        u8 *i_buf;
        u8 *i_buf_start;
        u8 *i_buf_end;
-       long r_left;
+       u64 r_left;
        long b_left;
 
        u32 bad_skip;   /* for nand use */
@@ -140,6 +138,9 @@ struct dfu_entity {
        unsigned int inited:1;
 };
 
+#ifdef CONFIG_SET_DFU_ALT_INFO
+void set_dfu_alt_info(char *interface, char *devstr);
+#endif
 int dfu_config_entities(char *s, char *interface, char *devstr);
 void dfu_free_entities(void);
 void dfu_show_entities(void);
@@ -150,17 +151,57 @@ struct dfu_entity *dfu_get_entity(int alt);
 char *dfu_extract_token(char** e, int *n);
 void dfu_trigger_reset(void);
 int dfu_get_alt(char *name);
-bool dfu_reset(void);
 int dfu_init_env_entities(char *interface, char *devstr);
 unsigned char *dfu_get_buf(struct dfu_entity *dfu);
 unsigned char *dfu_free_buf(void);
 unsigned long dfu_get_buf_size(void);
+bool dfu_usb_get_reset(void);
 
 int dfu_read(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
 int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
 int dfu_flush(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
+
+/*
+ * dfu_defer_flush - pointer to store dfu_entity for deferred flashing.
+ *                  It should be NULL when not used.
+ */
+extern struct dfu_entity *dfu_defer_flush;
+/**
+ * dfu_get_defer_flush - get current value of dfu_defer_flush pointer
+ *
+ * @return - value of the dfu_defer_flush pointer
+ */
+static inline struct dfu_entity *dfu_get_defer_flush(void)
+{
+       return dfu_defer_flush;
+}
+
+/**
+ * dfu_set_defer_flush - set the dfu_defer_flush pointer
+ *
+ * @param dfu - pointer to the dfu_entity, which should be written
+ */
+static inline void dfu_set_defer_flush(struct dfu_entity *dfu)
+{
+       dfu_defer_flush = dfu;
+}
+
+/**
+ * dfu_write_from_mem_addr - write data from memory to DFU managed medium
+ *
+ * This function adds support for writing data starting from fixed memory
+ * address (like $loadaddr) to dfu managed medium (e.g. NAND, MMC, file system)
+ *
+ * @param dfu - dfu entity to which we want to store data
+ * @param buf - fixed memory addres from where data starts
+ * @param size - number of bytes to write
+ *
+ * @return - 0 on success, other value on failure
+ */
+int dfu_write_from_mem_addr(struct dfu_entity *dfu, void *buf, int size);
+
 /* Device specific */
-#ifdef CONFIG_DFU_MMC
+#if CONFIG_IS_ENABLED(DFU_MMC)
 extern int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s);
 #else
 static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr,
@@ -171,7 +212,7 @@ static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr,
 }
 #endif
 
-#ifdef CONFIG_DFU_NAND
+#if CONFIG_IS_ENABLED(DFU_NAND)
 extern int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s);
 #else
 static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr,
@@ -182,7 +223,7 @@ static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr,
 }
 #endif
 
-#ifdef CONFIG_DFU_RAM
+#if CONFIG_IS_ENABLED(DFU_RAM)
 extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, char *s);
 #else
 static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr,
@@ -193,7 +234,7 @@ static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr,
 }
 #endif
 
-#ifdef CONFIG_DFU_SF
+#if CONFIG_IS_ENABLED(DFU_SF)
 extern int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr, char *s);
 #else
 static inline int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr,
@@ -204,5 +245,31 @@ static inline int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr,
 }
 #endif
 
+/**
+ * dfu_tftp_write - Write TFTP data to DFU medium
+ *
+ * This function is storing data received via TFTP on DFU supported medium.
+ *
+ * @param dfu_entity_name - name of DFU entity to write
+ * @param addr - address of data buffer to write
+ * @param len - number of bytes
+ * @param interface - destination DFU medium (e.g. "mmc")
+ * @param devstring - instance number of destination DFU medium (e.g. "1")
+ *
+ * @return 0 on success, otherwise error code
+ */
+#if CONFIG_IS_ENABLED(DFU_TFTP)
+int dfu_tftp_write(char *dfu_entity_name, unsigned int addr, unsigned int len,
+                  char *interface, char *devstring);
+#else
+static inline int dfu_tftp_write(char *dfu_entity_name, unsigned int addr,
+                                unsigned int len, char *interface,
+                                char *devstring)
+{
+       puts("TFTP write support for DFU not available!\n");
+       return -ENOSYS;
+}
+#endif
+
 int dfu_add(struct usb_configuration *c);
 #endif /* __DFU_ENTITY_H_ */