board: stm32mp1: Remove gpio_hog_probe_all() from board

[J-u-boot.git] / configs / P1020RDB-PC_36BIT_NAND_defconfig

diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig
index 32efb87aa057209b8832506fbf41287a5a8374f4..5a4cc22cb255ff3de111ec09bf1bd989241d135e 100644 (file)
--- a/configs/P1020RDB-PC_36BIT_NAND_defconfig
+++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig
@@ -2,12 +2,12 @@ CONFIG_PPC=y
 CONFIG_SYS_TEXT_BASE=0x11001000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x100000
+CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b"
 CONFIG_SPL_TEXT_BASE=0xFF800000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b"
 CONFIG_MPC85xx=y
 # CONFIG_CMD_ERRATA is not set
 CONFIG_TARGET_P1020RDB_PC=y
@@ -27,7 +27,7 @@ CONFIG_SPL_NAND_BOOT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
-CONFIG_TPL_I2C_SUPPORT=y
+CONFIG_TPL_I2C=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_TPL_NAND_SUPPORT=y
 CONFIG_TPL_SERIAL_SUPPORT=y
@@ -76,8 +76,6 @@ CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_FSL=y
 CONFIG_DM_RTC=y
 CONFIG_SYS_NS16550=y
@@ -85,6 +83,5 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_ADDR_MAP=y