*
* Configuration settings for the Freescale i.MX31 PDK board.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 /* in a mx31 */
+#define CONFIG_MX31 /* This is a mx31 */
+
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE 2048
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE 0x87dc0000
+#define CONFIG_SYS_TEXT_BASE 0x87e00000
+
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONFIG_HW_WATCHDOG
#define CONFIG_MXC_GPIO
#define CONFIG_HARD_SPI
#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
/* PMIC Controller */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_SPI
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
#define CONFIG_FSL_PMIC_BUS 1
#define CONFIG_FSL_PMIC_CS 2
#define CONFIG_FSL_PMIC_CLK 1000000
/***********************************************************
* Command definition
***********************************************************/
-
-#include <config_cmd_default.h>
-
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NAND
#define CONFIG_CMD_BOOTZ
-/*
- * Disabled due to compilation errors in cmd_bootm.c (IMLS seems to require
- * that CFG_NO_FLASH is undefined).
- */
-#undef CONFIG_CMD_IMLS
-
#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTDELAY 1
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs_base=setenv bootargs console=ttymxc0,115200\0" \
"bootcmd=run bootcmd_net\0" \
"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
"tftpboot 0x81000000 uImage-mx31; bootm\0" \
- "prg_uboot=tftpboot 0x81000000 u-boot-nand.bin; " \
+ "prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; " \
"nand erase 0x0 0x40000; " \
"nand write 0x81000000 0x0 0x40000\0"
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "MX31PDK U-Boot > "
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT)+16)
/* max number of command args */
#define CONFIG_SYS_MAXARGS 16
/* Boot Argument Buffer Size */
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x81000000
-#define CONFIG_SYS_HZ 1000
-
#define CONFIG_CMDLINE_EDITING
/*-----------------------------------------------------------------------
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_GBL_DATA_OFFSET)
+ CONFIG_SYS_INIT_RAM_SIZE)
/*-----------------------------------------------------------------------
* FLASH and environment organization
/* NAND configuration for the NAND_SPL */
/* Start copying real U-boot from the second page */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800
-#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
+#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x3f800
/* Load U-Boot to this address */
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x87f00000
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
/* Configuration of lowlevel_init.S (clocks and SDRAM) */
#define CCM_CCMR_SETUP 0x074B0BF5
-#define CCM_PDR0_SETUP_532MHZ (PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | \
- PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | \
- PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | \
- PDR0_MCU_PODF(0))
-#define CCM_MPCTL_SETUP_532MHZ (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | \
+#define CCM_PDR0_SETUP_532MHZ (PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | \
+ PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) | \
+ PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) | \
+ PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0))
+#define CCM_MPCTL_SETUP_532MHZ (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | \
PLL_MFN(12))
#define ESDMISC_MDDR_SETUP 0x00000004
projects / J-u-boot.git / blobdiff