Convert CONFIG_CONS_INDEX et al to Kconfig

[J-u-boot.git] / configs / ls2080aqds_qspi_defconfig

diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig
index 0b0e673816af692ce9c8e9578fb8c3e0e33e764f..0c203373dfed9b65cbbe2bb63919be177071c0f9 100644 (file)
--- a/configs/ls2080aqds_qspi_defconfig
+++ b/configs/ls2080aqds_qspi_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LS2080AQDS=y
 CONFIG_SYS_TEXT_BASE=0x20100000
+CONFIG_SYS_MALLOC_LEN=0x202000
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x300000
@@ -13,14 +14,15 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
 CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
-# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load"
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -41,11 +43,20 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DYNAMIC_DDR_CLK_FREQ=y
+CONFIG_DDR_ECC=y
+CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_EARLY_INIT=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_IFC=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_DM_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
+CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHYLIB=y
 CONFIG_PHYLIB_10G=y
 CONFIG_PHY_REALTEK=y
@@ -58,6 +69,7 @@ CONFIG_NVME=y
 CONFIG_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_RTC_ENABLE_32KHZ_OUTPUT=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
@@ -66,4 +78,3 @@ CONFIG_FSL_QSPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y