Convert CONFIG_CONS_INDEX et al to Kconfig

[J-u-boot.git] / include / configs / work_92105.h

diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index 27a89195c07a7762839f8e38d0ca1edfe8e2a330..9223aee5c16b4d17633bdad8c486409a6ec6c8c8 100644 (file)
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -13,25 +13,12 @@
 #include <linux/sizes.h>
 #include <asm/arch/cpu.h>
 
-/*
- * Define work_92105 machine type by hand -- done only for compatibility
- * with original board code
- */
-#define CONFIG_MACH_TYPE               736
-
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
 /*
  * Memory configurations
  */
-#define CONFIG_SYS_MALLOC_LEN          SZ_1M
 #define CONFIG_SYS_SDRAM_BASE          EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE          SZ_128M
 
-#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + SZ_32K)
-
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + SZ_512K \
                                         - GENERATED_GBL_DATA_SIZE)
 
@@ -43,20 +30,6 @@
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 /* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */
 
-/*
- * I2C driver
- */
-
-#define CONFIG_SYS_I2C_SPEED 350000
-
-/*
- * I2C EEPROM
- */
-
-/*
- * I2C RTC
- */
-
 #define CONFIG_RTC_DS1374
 
 /*
@@ -86,14 +59,11 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE 1
 #define CONFIG_SYS_MAX_NAND_CHIPS 1
 #define CONFIG_SYS_NAND_BASE MLC_NAND_BASE
-#define CONFIG_NAND_LPC32XX_MLC
 
 /*
  * GPIO
  */
 
-#define CONFIG_LPC32XX_GPIO
-
 /*
  * Environment
  */
@@ -101,12 +71,8 @@
 /*
  * Boot Linux
  */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
 
 #define CONFIG_BOOTFILE                        "uImage"
-#define CONFIG_LOADADDR                        0x80008000
 
 /*
  * SPL
@@ -118,7 +84,6 @@
 /* Use the framework and generic lib */
 /* SPL will use serial */
 /* SPL will load U-Boot from NAND offset 0x40000 */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS  0x00040000
 #define CONFIG_SPL_PAD_TO 0x20000
 /* U-Boot will be 0x40000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
 #define CONFIG_SYS_MONITOR_LEN 0x40000 /* actually, MAX size */