ARM: imx: Enable LTO for DH electronics i.MX8M Plus DHCOM

[J-u-boot.git] / configs / ls1046aqds_lpuart_defconfig

diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index bce8c6c734a63aae125a76eb40f998bd1e511d29..6bdf7582f47f0af8a812f1d5c7e54286a1c80fcc 100644 (file)
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -1,10 +1,11 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_TARGET_LS1046AQDS=y
-CONFIG_SYS_TEXT_BASE=0x60100000
+CONFIG_TEXT_BASE=0x60100000
 CONFIG_SYS_MALLOC_LEN=0x120000
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_SYS_I2C_MXC_I2C1=y
@@ -13,24 +14,36 @@ CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-lpuart"
+CONFIG_FSL_LS_PPA=y
+CONFIG_ENV_ADDR=0x60300000
+CONFIG_AHCI=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
 CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_VID=y
 CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv"
 CONFIG_VOL_MONITOR_INA220=y
 CONFIG_VOL_MONITOR_IR36021_SET=y
-CONFIG_FSL_LS_PPA=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FSL_QIXIS=y
+# CONFIG_QIXIS_I2C_ACCESS is not set
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
+CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
 CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;"
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_MISC_INIT_R=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
@@ -49,8 +62,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x60300000
-CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
@@ -64,8 +76,12 @@ CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_EMPTY_INFO=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_FLASH_QUIET_TEST=y
+CONFIG_SYS_MAX_FLASH_SECT=1024
 CONFIG_SYS_MAX_FLASH_BANKS=2
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
@@ -79,17 +95,15 @@ CONFIG_PHYLIB_10G=y
 CONFIG_PHY_REALTEK=y
 CONFIG_PHY_VITESSE=y
 CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_SYS_FMAN_FW_ADDR=0x60900000
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_PCIE_LAYERSCAPE_EP=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
 CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y