board: sl28: fix network on variant 3

[J-u-boot.git] / configs / socfpga_vining_fpga_defconfig

diff --git a/configs/socfpga_vining_fpga_defconfig b/configs/socfpga_vining_fpga_defconfig
index 6d859b3274bdc60ab9872e1ceecff37d3cc339c4..df8391dc214f11d477d267aa61c1fd1a10faf484 100644 (file)
--- a/configs/socfpga_vining_fpga_defconfig
+++ b/configs/socfpga_vining_fpga_defconfig
@@ -2,19 +2,23 @@ CONFIG_ARM=y
 CONFIG_SYS_L2_PL310=y
 CONFIG_ARCH_SOCFPGA=y
 CONFIG_SYS_MALLOC_LEN=0x4000000
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
+CONFIG_SF_DEFAULT_SPEED=40000000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_vining_fpga"
+CONFIG_DM_RESET=y
+CONFIG_SPL_STACK=0x0
 CONFIG_SPL_TEXT_BASE=0xFFFF0000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_TARGET_SOCFPGA_SOFTING_VINING_FPGA=y
 CONFIG_ENV_OFFSET_REDUND=0x110000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
-CONFIG_FIT=y
 CONFIG_TIMESTAMP=y
+CONFIG_FIT=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200"
@@ -31,19 +35,16 @@ CONFIG_MISC_INIT_R=y
 CONFIG_SPL_PAD_TO=0x10000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x0
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
 CONFIG_CMDLINE_PS_SUPPORT=y
 CONFIG_SYS_MAXARGS=32
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=70
 CONFIG_CMD_DFU=y
-# CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -92,8 +93,6 @@ CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_SYS_MMC_MAX_BLK_COUNT=256
 CONFIG_MMC_DW=y
-CONFIG_MTD=y
-CONFIG_SF_DEFAULT_SPEED=40000000
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
@@ -104,7 +103,6 @@ CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
-CONFIG_DM_RESET=y
 CONFIG_SPI=y
 CONFIG_CADENCE_QSPI=y
 CONFIG_DESIGNWARE_SPI=y