board: stm32mp1: Remove gpio_hog_probe_all() from board

[J-u-boot.git] / configs / pico-imx8mq_defconfig

diff --git a/configs/pico-imx8mq_defconfig b/configs/pico-imx8mq_defconfig
index ef32639c36fb5f210582c25b6bac764391b7e7c3..9d664c07f06579eb56547df7671f19aac3fd5336 100644 (file)
--- a/configs/pico-imx8mq_defconfig
+++ b/configs/pico-imx8mq_defconfig
@@ -4,18 +4,18 @@ CONFIG_SYS_TEXT_BASE=0x40200000
 CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x400000
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx8mq-pico-pi"
 CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_TARGET_PICO_IMX8MQ=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL=y
-CONFIG_CSF_SIZE=0x2000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg"
-CONFIG_BOARD_LATE_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_BOOTM_NETBSD is not set
@@ -36,13 +36,13 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mq-pico-pi"
+CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
 CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MXC=y
-CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y
 CONFIG_DM_ETH=y
@@ -54,4 +54,5 @@ CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_DM_RESET=y
+CONFIG_MXC_UART=y
 CONFIG_DM_THERMAL=y