Add pxe command

[J-u-boot.git] / doc / README.marubun-pcmcia

diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia
index 73c9f7f53bfa03d67bf3191d6d4d024b99e6ae1a..d3563a3cd9993a712fe4e904aa1fa4c31912b0f7 100644 (file)
--- a/doc/README.marubun-pcmcia
+++ b/doc/README.marubun-pcmcia
@@ -1,60 +1,60 @@
 
 U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
        Last update 21/11/2007 by Nobuhiro Iwamatsu
-       
+
 ========================================================================================
 
-0. What's this? 
+0. What's this?
     This driver supports MARUBUN MR-SHPC-01.
        url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html
        (Sorry Japanese only.)
 
-    This chip is used with SuperH well, and adopted by the 
-    reference board. 
+    This chip is used with SuperH well, and adopted by the
+    reference board.
        ex. * MS7750SE01
                * MS7722SE01
-               * other 
-               
+               * other
+
     This chip doesn't support CardBus.
 
-1. base source code 
+1. base source code
     The code is based on sources from the Linux kernel
-       ( arch/sh/kernel/cf-enabler.c ). 
+       ( arch/sh/kernel/cf-enabler.c ).
 
-2. How to use 
+2. How to use
     The options you have to specify in the config file are (with the
     value for my board as an example):
 
     * CONFIG_MARUBUN_PCCARD
        If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD.
-       ex.     #define CONFIG_MARUBUN_PCCARD
-               
+       ex.     #define CONFIG_MARUBUN_PCCARD
+
     * CONFIG_PCMCIA_SLOT_A
-       Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
+       Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
        ex.     #define CONFIG_PCMCIA_SLOT_A    1
 
-    * CFG_MARUBUN_MRSHPC
-       This is MR-SHPC-01 PCMCIA controler base address.
-       You should do the setting matched to your environment. 
-       ex.  #define CFG_MARUBUN_MRSHPC 0xb03fffe0 
+    * CONFIG_SYS_MARUBUN_MRSHPC
+       This is MR-SHPC-01 PCMCIA controler base address.
+       You should do the setting matched to your environment.
+       ex.  #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0
             ( for MS7722SE01 environment )
 
-    * CFG_MARUBUN_MW1
+    * CONFIG_SYS_MARUBUN_MW1
        This is MR-SHPC-01 memory window base address.
-       You should do the setting matched to your environment. 
-       ex. #define CFG_MARUBUN_MW1 0xb0400000
+       You should do the setting matched to your environment.
+       ex. #define CONFIG_SYS_MARUBUN_MW1 0xb0400000
             ( for MS7722SE01 environment )
-       
-    * CFG_MARUBUN_MW1
+
+    * CONFIG_SYS_MARUBUN_MW1
        This is MR-SHPC-01 attribute window base address.
-       You should do the setting matched to your environment. 
-       ex. #define CFG_MARUBUN_MW2 0xb0500000
+       You should do the setting matched to your environment.
+       ex. #define CONFIG_SYS_MARUBUN_MW2 0xb0500000
             ( for MS7722SE01 environment )
-            
-    * CFG_MARUBUN_MW1
+
+    * CONFIG_SYS_MARUBUN_MW1
        This is MR-SHPC-01 I/O window base address.
-       You should do the setting matched to your environment. 
-       ex. #define CFG_MARUBUN_IO  0xb0600000
+       You should do the setting matched to your environment.
+       ex. #define CONFIG_SYS_MARUBUN_IO  0xb0600000
             ( for MS7722SE01 environment )
 
 3. Other