configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / libretech-ac_defconfig

diff --git a/configs/libretech-ac_defconfig b/configs/libretech-ac_defconfig
index 4ed04fa518bf1a89eb3b0ded26ceb4010f675e85..17841630e2b78119241ab9266ecab6c070268156 100644 (file)
--- a/configs/libretech-ac_defconfig
+++ b/configs/libretech-ac_defconfig
@@ -1,4 +1,6 @@
 CONFIG_ARM=y
+CONFIG_SYS_VENDOR="libre-computer"
+CONFIG_SYS_BOARD="aml-s805x-ac"
 CONFIG_SYS_CONFIG_NAME="libretech-ac"
 CONFIG_ARCH_MESON=y
 CONFIG_TEXT_BASE=0x01000000
@@ -9,16 +11,18 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFF0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s805x-libretech-ac"
+CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s805x-libretech-ac"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_GXL=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" libretech-ac"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
@@ -31,7 +35,9 @@ CONFIG_MISC_INIT_R=y
 CONFIG_SYS_MAXARGS=32
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
+CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_ADC=y
+CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
@@ -40,11 +46,14 @@ CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SARADC_MESON=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
 CONFIG_MMC_MESON_GX=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
@@ -55,7 +64,7 @@ CONFIG_PHY_MESON_GXL=y
 CONFIG_DM_MDIO=y
 CONFIG_DM_MDIO_MUX=y
 CONFIG_ETH_DESIGNWARE_MESON8B=y
-CONFIG_MDIO_MUX_MMIOREG=y
+CONFIG_MDIO_MUX_MESON_GXL=y
 CONFIG_MESON_GXL_USB_PHY=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_MESON_GXL=y