Merge tag 'v2023.10-rc4' into next

[J-u-boot.git] / arch / riscv / cpu / cpu.c

diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c
index 5ca185745eebe551dbc2de14ff26adb05723108b..d64aa330f206531f57ce527b76f325752cbb3241 100644 (file)
--- a/arch/riscv/cpu/cpu.c
+++ b/arch/riscv/cpu/cpu.c
@@ -6,32 +6,39 @@
 #include <common.h>
 #include <cpu.h>
 #include <dm.h>
 #include <common.h>
 #include <cpu.h>
 #include <dm.h>

+#include <dm/lists.h>
+#include <event.h>
+#include <init.h>

 #include <log.h>
 #include <asm/encoding.h>
 #include <log.h>
 #include <asm/encoding.h>

+#include <asm/system.h>

 #include <dm/uclass-internal.h>
 #include <dm/uclass-internal.h>

+#include <linux/bitops.h>

 
 /*
  * The variables here must be stored in the data section since they are used
  * before the bss section is available.
  */
 
 /*
  * The variables here must be stored in the data section since they are used
  * before the bss section is available.
  */

-#ifdef CONFIG_OF_PRIOR_STAGE
-phys_addr_t prior_stage_fdt_address __attribute__((section(".data")));
-#endif
-#ifndef CONFIG_XIP
-u32 hart_lottery __attribute__((section(".data"))) = 0;
+#if !CONFIG_IS_ENABLED(XIP)
+u32 hart_lottery __section(".data") = 0;

 
 

+#ifdef CONFIG_AVAILABLE_HARTS

 /*
  * The main hart running U-Boot has acquired available_harts_lock until it has
  * finished initialization of global data.
  */
 u32 available_harts_lock = 1;
 #endif
 /*
  * The main hart running U-Boot has acquired available_harts_lock until it has
  * finished initialization of global data.
  */
 u32 available_harts_lock = 1;
 #endif

+#endif

 
 static inline bool supports_extension(char ext)
 {
 
 static inline bool supports_extension(char ext)
 {

-#ifdef CONFIG_CPU
+#if CONFIG_IS_ENABLED(RISCV_MMODE)
+       return csr_read(CSR_MISA) & (1 << (ext - 'a'));
+#elif CONFIG_CPU

        struct udevice *dev;
        char desc[32];
        struct udevice *dev;
        char desc[32];

+       int i;

 
        uclass_find_first_device(UCLASS_CPU, &dev);
        if (!dev) {
 
        uclass_find_first_device(UCLASS_CPU, &dev);
        if (!dev) {


@@ -39,24 +46,27 @@ static inline bool supports_extension(char ext)
                return false;
        }
        if (!cpu_get_desc(dev, desc, sizeof(desc))) {
                return false;
        }
        if (!cpu_get_desc(dev, desc, sizeof(desc))) {

-               /* skip the first 4 characters (rv32|rv64) */
-               if (strchr(desc + 4, ext))
-                       return true;
+               /*
+                * skip the first 4 characters (rv32|rv64) and
+                * check until underscore
+                */
+               for (i = 4; i < sizeof(desc); i++) {
+                       if (desc[i] == '_' || desc[i] == '\0')
+                               break;
+                       if (desc[i] == ext)
+                               return true;
+               }

        }
 
        return false;
 #else  /* !CONFIG_CPU */
        }
 
        return false;
 #else  /* !CONFIG_CPU */

-#ifdef CONFIG_RISCV_MMODE
-       return csr_read(CSR_MISA) & (1 << (ext - 'a'));
-#else  /* !CONFIG_RISCV_MMODE */

 #warning "There is no way to determine the available extensions in S-mode."
 #warning "Please convert your board to use the RISC-V CPU driver."
        return false;
 #warning "There is no way to determine the available extensions in S-mode."
 #warning "Please convert your board to use the RISC-V CPU driver."
        return false;

-#endif /* CONFIG_RISCV_MMODE */

 #endif /* CONFIG_CPU */
 }
 
 #endif /* CONFIG_CPU */
 }
 

-static int riscv_cpu_probe(void)
+static int riscv_cpu_probe(void *ctx, struct event *event)

 {
 #ifdef CONFIG_CPU
        int ret;
 {
 #ifdef CONFIG_CPU
        int ret;


@@ -69,12 +79,24 @@ static int riscv_cpu_probe(void)
 
        return 0;
 }
 
        return 0;
 }

+EVENT_SPY(EVT_DM_POST_INIT_R, riscv_cpu_probe);

 
 

-int arch_cpu_init_dm(void)
+/*
+ * This is called on secondary harts just after the IPI is init'd. Currently
+ * there's nothing to do, since we just need to clear any existing IPIs, and
+ * that is handled by the sending of an ipi itself.
+ */
+#if CONFIG_IS_ENABLED(SMP)
+static void dummy_pending_ipi_clear(ulong hart, ulong arg0, ulong arg1)
+{
+}
+#endif
+
+int riscv_cpu_setup(void)

 {
        int ret;
 
 {
        int ret;
 

-       ret = riscv_cpu_probe();
+       ret = riscv_cpu_probe(ctx, event);

        if (ret)
                return ret;
 
        if (ret)
                return ret;
 


@@ -89,17 +111,59 @@ int arch_cpu_init_dm(void)
                 * Enable perf counters for cycle, time,
                 * and instret counters only
                 */
                 * Enable perf counters for cycle, time,
                 * and instret counters only
                 */

-               csr_write(CSR_MCOUNTEREN, GENMASK(2, 0));
+               if (supports_extension('u')) {
+#ifdef CONFIG_RISCV_PRIV_1_9
+                       csr_write(CSR_MSCOUNTEREN, GENMASK(2, 0));
+                       csr_write(CSR_MUCOUNTEREN, GENMASK(2, 0));
+#else
+                       csr_write(CSR_MCOUNTEREN, GENMASK(2, 0));
+#endif
+               }

 
                /* Disable paging */
                if (supports_extension('s'))
 
                /* Disable paging */
                if (supports_extension('s'))

+#ifdef CONFIG_RISCV_PRIV_1_9
+                       csr_read_clear(CSR_MSTATUS, SR_VM);
+#else

                        csr_write(CSR_SATP, 0);
                        csr_write(CSR_SATP, 0);

+#endif

        }
 
        }
 

+#if CONFIG_IS_ENABLED(SMP)
+       ret = riscv_init_ipi();
+       if (ret)
+               return ret;
+
+       /*
+        * Clear all pending IPIs on secondary harts. We don't do anything on
+        * the boot hart, since we never send an IPI to ourselves, and no
+        * interrupts are enabled
+        */
+       ret = smp_call_function((ulong)dummy_pending_ipi_clear, 0, 0, 0);
+       if (ret)
+               return ret;
+#endif
+

        return 0;
 }
        return 0;
 }

+EVENT_SPY_SIMPLE(EVT_DM_POST_INIT_F, riscv_cpu_setup);

 
 int arch_early_init_r(void)
 {
 
 int arch_early_init_r(void)
 {

-       return riscv_cpu_probe();
+       if (IS_ENABLED(CONFIG_SYSRESET_SBI))
+               device_bind_driver(gd->dm_root, "sbi-sysreset",
+                                  "sbi-sysreset", NULL);
+
+       return 0;
+}
+
+/**
+ * harts_early_init() - A callback function called by start.S to configure
+ * feature settings of each hart.
+ *
+ * In a multi-core system, memory access shall be careful here, it shall
+ * take care of race conditions.
+ */
+__weak void harts_early_init(void)
+{

 }
 }