board/km: drop CONFIG_KM_ROOTFSSIZE

[J-u-boot.git] / include / configs / snapper9g45.h

diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h
index a3b177305901afcf484c24225e75f5f63aa3a406..59bba7d143e28642a96beea16b38b4701213d83a 100644 (file)
--- a/include/configs/snapper9g45.h
+++ b/include/configs/snapper9g45.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Bluewater Systems Snapper 9G45 module
  *
  * (C) Copyright 2011 Bluewater Systems
  *   Author: Andre Renaud <[email protected]>
  *   Author: Ryan Mallon <[email protected]>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -20,25 +19,16 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 
 /* CPU */
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs      */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          ATMEL_BASE_CS6
 #define CONFIG_SYS_SDRAM_SIZE          (128 * 1024 * 1024) /* 64MB */
-#define CONFIG_SYS_INIT_SP_ADDR                (ATMEL_BASE_SRAM + 0x1000 - \
-                                        GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR       ATMEL_BASE_SRAM
 
 /* Mem test settings */
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + (1024 * 1024))
 
 /* NAND Flash */
-#define CONFIG_NAND_ATMEL
-#define CONFIG_ATMEL_NAND_HWECC
 #define CONFIG_SYS_NAND_ECC_BASE       ATMEL_BASE_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           ATMEL_BASE_CS3
@@ -48,41 +38,11 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN      AT91_PIN_PC8
 
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT         20
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-#define CONFIG_TFTP_PORT
-#define CONFIG_TFTP_TSIZE
-
-/* MMC */
-#define CONFIG_GENERIC_ATMEL_MCI
-
-/* LCD */
-#define CONFIG_ATMEL_LCD
-#define CONFIG_GURNARD_SPLASH
-
-#define CONFIG_ATMEL_SPI
-
-/* GPIOs and IO expander */
-#define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO
-#define CONFIG_AT91_GPIO_PULLUP                1
-
 /* UARTs/Serial console */
-#define CONFIG_ATMEL_USART
 
 /* Boot options */
-#define CONFIG_SYS_LOAD_ADDR           0x23000000
-
-#define CONFIG_BOOTP_BOOTFILESIZE
 
 /* Environment settings */
-#define CONFIG_ENV_OFFSET              (512 << 10)
-#define CONFIG_ENV_SIZE                        (256 << 10)
-#define CONFIG_ENV_OVERWRITE
 
 #define        CONFIG_EXTRA_ENV_SETTINGS       \
        "ethaddr=00:00:00:00:00:00\0" \
@@ -106,12 +66,4 @@
 
 /* Console settings */
 
-/* U-Boot memory settings */
-#define CONFIG_SYS_MALLOC_LEN          (1 << 20)
-
-/* Command line configuration */
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_CACHE
-
 #endif /* __CONFIG_H */