/*
- * (C) Copyright 2001
- *
- * See file CREDITS for list of people who contributed to this
- * project.
+ * (C) Copyright 2009
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * Changes for unified multibus/multiadapter I2C support.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * (C) Copyright 2001
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
#include <common.h>
#include <command.h>
+#include <edid.h>
#include <environment.h>
#include <i2c.h>
#include <malloc.h>
#include <asm/byteorder.h>
+#include <linux/compiler.h>
+
+DECLARE_GLOBAL_DATA_PTR;
/* Display values from last command.
* Memory modify remembered values are different from display memory.
* pairs. The following macros take care of this */
#if defined(CONFIG_SYS_I2C_NOPROBES)
-#if defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
static struct
{
uchar bus;
#define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */
#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a))
#define NO_PROBE_ADDR(i) i2c_no_probes[(i)]
-#endif /* CONFIG_MULTI_BUS */
-
-#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0]))
+#endif /* defined(CONFIG_SYS_I2C) */
#endif
-#if defined(CONFIG_I2C_MUX)
-static I2C_MUX_DEVICE *i2c_mux_devices = NULL;
-static int i2c_mux_busid = CONFIG_SYS_MAX_I2C_BUS;
-
-DECLARE_GLOBAL_DATA_PTR;
+#define DISP_LINE_LEN 16
-#endif
+/**
+ * i2c_init_board() - Board-specific I2C bus init
+ *
+ * This function is the default no-op implementation of I2C bus
+ * initialization. This function can be overriden by board-specific
+ * implementation if needed.
+ */
+__weak
+void i2c_init_board(void)
+{
+}
/* TODO: Implement architecture-specific get/set functions */
-unsigned int __def_i2c_get_bus_speed(void)
+
+/**
+ * i2c_get_bus_speed() - Return I2C bus speed
+ *
+ * This function is the default implementation of function for retrieveing
+ * the current I2C bus speed in Hz.
+ *
+ * A driver implementing runtime switching of I2C bus speed must override
+ * this function to report the speed correctly. Simple or legacy drivers
+ * can use this fallback.
+ *
+ * Returns I2C bus speed in Hz.
+ */
+#if !defined(CONFIG_SYS_I2C)
+/*
+ * TODO: Implement architecture-specific get/set functions
+ * Should go away, if we switched completely to new multibus support
+ */
+__weak
+unsigned int i2c_get_bus_speed(void)
{
return CONFIG_SYS_I2C_SPEED;
}
-unsigned int i2c_get_bus_speed(void)
- __attribute__((weak, alias("__def_i2c_get_bus_speed")));
-int __def_i2c_set_bus_speed(unsigned int speed)
+/**
+ * i2c_set_bus_speed() - Configure I2C bus speed
+ * @speed: Newly set speed of the I2C bus in Hz
+ *
+ * This function is the default implementation of function for setting
+ * the I2C bus speed in Hz.
+ *
+ * A driver implementing runtime switching of I2C bus speed must override
+ * this function to report the speed correctly. Simple or legacy drivers
+ * can use this fallback.
+ *
+ * Returns zero on success, negative value on error.
+ */
+__weak
+int i2c_set_bus_speed(unsigned int speed)
{
if (speed != CONFIG_SYS_I2C_SPEED)
return -1;
return 0;
}
-int i2c_set_bus_speed(unsigned int)
- __attribute__((weak, alias("__def_i2c_set_bus_speed")));
+#endif
-#define DISP_LINE_LEN 16
+/**
+ * get_alen() - Small parser helper function to get address length
+ *
+ * Returns the address length.
+ */
+static uint get_alen(char *arg)
+{
+ int j;
+ int alen;
-/*
+ alen = 1;
+ for (j = 0; j < 8; j++) {
+ if (arg[j] == '.') {
+ alen = arg[j+1] - '0';
+ break;
+ } else if (arg[j] == '\0')
+ break;
+ }
+ return alen;
+}
+
+/**
+ * do_i2c_read() - Handle the "i2c read" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ *
* Syntax:
* i2c read {i2c_chip} {devaddr}{.0, .1, .2} {len} {memaddr}
*/
-
-static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
uint devaddr, alen, length;
u_char *memaddr;
- int j;
- if (argc != 5) {
- cmd_usage(cmdtp);
- return 1;
- }
+ if (argc != 5)
+ return CMD_RET_USAGE;
/*
* I2C chip address
* 2 bytes long. Some day it might be 3 bytes long :-).
*/
devaddr = simple_strtoul(argv[2], NULL, 16);
- alen = 1;
- for (j = 0; j < 8; j++) {
- if (argv[2][j] == '.') {
- alen = argv[2][j+1] - '0';
- if (alen > 3) {
- cmd_usage(cmdtp);
- return 1;
- }
- break;
- } else if (argv[2][j] == '\0')
- break;
- }
+ alen = get_alen(argv[2]);
+ if (alen > 3)
+ return CMD_RET_USAGE;
/*
* Length is the number of objects, not number of bytes.
return 0;
}
+static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ u_char chip;
+ uint devaddr, alen, length;
+ u_char *memaddr;
+
+ if (argc != 5)
+ return cmd_usage(cmdtp);
+
+ /*
+ * memaddr is the address where to store things in memory
+ */
+ memaddr = (u_char *)simple_strtoul(argv[1], NULL, 16);
+
+ /*
+ * I2C chip address
+ */
+ chip = simple_strtoul(argv[2], NULL, 16);
+
+ /*
+ * I2C data address within the chip. This can be 1 or
+ * 2 bytes long. Some day it might be 3 bytes long :-).
+ */
+ devaddr = simple_strtoul(argv[3], NULL, 16);
+ alen = get_alen(argv[3]);
+ if (alen > 3)
+ return cmd_usage(cmdtp);
+
+ /*
+ * Length is the number of objects, not number of bytes.
+ */
+ length = simple_strtoul(argv[4], NULL, 16);
+
+ while (length-- > 0) {
+ if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) {
+ puts("Error writing to the chip.\n");
+ return 1;
+ }
/*
+ * No write delay with FRAM devices.
+ */
+#if !defined(CONFIG_SYS_I2C_FRAM)
+ udelay(11000);
+#endif
+ }
+ return 0;
+}
+
+/**
+ * do_i2c_md() - Handle the "i2c md" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ *
* Syntax:
* i2c md {i2c_chip} {addr}{.0, .1, .2} {len}
*/
-static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
uint addr, alen, length;
alen = i2c_dp_last_alen;
length = i2c_dp_last_length;
- if (argc < 3) {
- cmd_usage(cmdtp);
- return 1;
- }
+ if (argc < 3)
+ return CMD_RET_USAGE;
if ((flag & CMD_FLAG_REPEAT) == 0) {
/*
* New command specified.
*/
- alen = 1;
/*
* I2C chip address
* 2 bytes long. Some day it might be 3 bytes long :-).
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = 1;
- for (j = 0; j < 8; j++) {
- if (argv[2][j] == '.') {
- alen = argv[2][j+1] - '0';
- if (alen > 3) {
- cmd_usage(cmdtp);
- return 1;
- }
- break;
- } else if (argv[2][j] == '\0')
- break;
- }
+ alen = get_alen(argv[2]);
+ if (alen > 3)
+ return CMD_RET_USAGE;
/*
* If another parameter, it is the length to display.
return 0;
}
-
-/* Write (fill) memory
+/**
+ * do_i2c_mw() - Handle the "i2c mw" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
*
* Syntax:
* i2c mw {i2c_chip} {addr}{.0, .1, .2} {data} [{count}]
*/
-static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
uchar chip;
ulong addr;
uint alen;
uchar byte;
int count;
- int j;
- if ((argc < 4) || (argc > 5)) {
- cmd_usage(cmdtp);
- return 1;
- }
+ if ((argc < 4) || (argc > 5))
+ return CMD_RET_USAGE;
/*
* Chip is always specified.
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = 1;
- for (j = 0; j < 8; j++) {
- if (argv[2][j] == '.') {
- alen = argv[2][j+1] - '0';
- if (alen > 3) {
- cmd_usage(cmdtp);
- return 1;
- }
- break;
- } else if (argv[2][j] == '\0')
- break;
- }
+ alen = get_alen(argv[2]);
+ if (alen > 3)
+ return CMD_RET_USAGE;
/*
* Value to write is always specified.
#endif
}
- return (0);
+ return 0;
}
-/* Calculate a CRC on memory
+/**
+ * do_i2c_crc() - Handle the "i2c crc32" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Calculate a CRC on memory
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
*
* Syntax:
* i2c crc32 {i2c_chip} {addr}{.0, .1, .2} {count}
*/
-static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
uchar chip;
ulong addr;
uchar byte;
ulong crc;
ulong err;
- int j;
- if (argc < 4) {
- cmd_usage(cmdtp);
- return 1;
- }
+ if (argc < 4)
+ return CMD_RET_USAGE;
/*
* Chip is always specified.
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = 1;
- for (j = 0; j < 8; j++) {
- if (argv[2][j] == '.') {
- alen = argv[2][j+1] - '0';
- if (alen > 3) {
- cmd_usage(cmdtp);
- return 1;
- }
- break;
- } else if (argv[2][j] == '\0')
- break;
- }
+ alen = get_alen(argv[2]);
+ if (alen > 3)
+ return CMD_RET_USAGE;
/*
* Count is always specified
return 0;
}
-/* Modify memory.
+/**
+ * mod_i2c_mem() - Handle the "i2c mm" and "i2c nm" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Modify memory.
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
*
* Syntax:
* i2c mm{.b, .w, .l} {i2c_chip} {addr}{.0, .1, .2}
* i2c nm{.b, .w, .l} {i2c_chip} {addr}{.0, .1, .2}
*/
-
static int
-mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[])
+mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[])
{
uchar chip;
ulong addr;
ulong data;
int size = 1;
int nbytes;
- int j;
- extern char console_buffer[];
- if (argc != 3) {
- cmd_usage(cmdtp);
- return 1;
- }
+ if (argc != 3)
+ return CMD_RET_USAGE;
#ifdef CONFIG_BOOT_RETRY_TIME
reset_cmd_timeout(); /* got a good command to get here */
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = 1;
- for (j = 0; j < 8; j++) {
- if (argv[2][j] == '.') {
- alen = argv[2][j+1] - '0';
- if (alen > 3) {
- cmd_usage(cmdtp);
- return 1;
- }
- break;
- } else if (argv[2][j] == '\0')
- break;
- }
+ alen = get_alen(argv[2]);
+ if (alen > 3)
+ return CMD_RET_USAGE;
}
/*
return 0;
}
-/*
+/**
+ * do_i2c_probe() - Handle the "i2c probe" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ *
* Syntax:
- * i2c probe {addr}{.0, .1, .2}
+ * i2c probe {addr}
+ *
+ * Returns zero (success) if one or more I2C devices was found
*/
-static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int j;
+ int addr = -1;
+ int found = 0;
#if defined(CONFIG_SYS_I2C_NOPROBES)
int k, skip;
- uchar bus = GET_BUS_NUM;
+ unsigned int bus = GET_BUS_NUM;
#endif /* NOPROBES */
+ if (argc == 2)
+ addr = simple_strtol(argv[1], 0, 16);
+
puts ("Valid chip addresses:");
for (j = 0; j < 128; j++) {
+ if ((0 <= addr) && (j != addr))
+ continue;
+
#if defined(CONFIG_SYS_I2C_NOPROBES)
skip = 0;
- for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
+ for (k = 0; k < ARRAY_SIZE(i2c_no_probes); k++) {
if (COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) {
skip = 1;
break;
if (skip)
continue;
#endif
- if (i2c_probe(j) == 0)
+ if (i2c_probe(j) == 0) {
printf(" %02X", j);
+ found++;
+ }
}
putc ('\n');
#if defined(CONFIG_SYS_I2C_NOPROBES)
puts ("Excluded chip addresses:");
- for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
+ for (k = 0; k < ARRAY_SIZE(i2c_no_probes); k++) {
if (COMPARE_BUS(bus,k))
printf(" %02X", NO_PROBE_ADDR(k));
}
putc ('\n');
#endif
- return 0;
+ return (0 == found);
}
-/*
+/**
+ * do_i2c_loop() - Handle the "i2c loop" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ *
* Syntax:
* i2c loop {i2c_chip} {addr}{.0, .1, .2} [{length}] [{delay}]
* {length} - Number of bytes to read
* {delay} - A DECIMAL number and defaults to 1000 uSec
*/
-static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
ulong alen;
uint length;
u_char bytes[16];
int delay;
- int j;
- if (argc < 3) {
- cmd_usage(cmdtp);
- return 1;
- }
+ if (argc < 3)
+ return CMD_RET_USAGE;
/*
* Chip is always specified.
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = 1;
- for (j = 0; j < 8; j++) {
- if (argv[2][j] == '.') {
- alen = argv[2][j+1] - '0';
- if (alen > 3) {
- cmd_usage(cmdtp);
- return 1;
- }
- break;
- } else if (argv[2][j] == '\0')
- break;
- }
+ alen = get_alen(argv[2]);
+ if (alen > 3)
+ return CMD_RET_USAGE;
/*
* Length is the number of objects, not number of bytes.
/*
* The SDRAM command is separately configured because many
* (most?) embedded boards don't use SDRAM DIMMs.
+ *
+ * FIXME: Document and probably move elsewhere!
*/
#if defined(CONFIG_CMD_SDRAM)
static void print_ddr2_tcyc (u_char const b)
* Syntax:
* i2c sdram {i2c_chip}
*/
-static int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+static int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
enum { unknown, EDO, SDRAM, DDR2 } type;
"32 MiB", "16 MiB", "8 MiB", "4 MiB"
};
- if (argc < 2) {
- cmd_usage(cmdtp);
- return 1;
- }
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
/*
* Chip is always specified.
*/
}
#endif
-#if defined(CONFIG_I2C_MUX)
-static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+/*
+ * Syntax:
+ * i2c edid {i2c_chip}
+ */
+#if defined(CONFIG_I2C_EDID)
+int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
- int ret=0;
+ u_char chip;
+ struct edid1_info edid;
+
+ if (argc < 2) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ chip = simple_strtoul(argv[1], NULL, 16);
+ if (i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)) != 0) {
+ puts("Error reading EDID content.\n");
+ return 1;
+ }
+
+ if (edid_check_info(&edid)) {
+ puts("Content isn't valid EDID.\n");
+ return 1;
+ }
+
+ edid_print_info(&edid);
+ return 0;
+
+}
+#endif /* CONFIG_I2C_EDID */
+
+/**
+ * do_i2c_show_bus() - Handle the "i2c bus" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero always.
+ */
+#if defined(CONFIG_SYS_I2C)
+int do_i2c_show_bus(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int i;
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+ int j;
+#endif
if (argc == 1) {
/* show all busses */
- I2C_MUX *mux;
- I2C_MUX_DEVICE *device = i2c_mux_devices;
-
- printf ("Busses reached over muxes:\n");
- while (device != NULL) {
- printf ("Bus ID: %x\n", device->busid);
- printf (" reached over Mux(es):\n");
- mux = device->mux;
- while (mux != NULL) {
- printf (" %s@%x ch: %x\n", mux->name, mux->chip, mux->channel);
- mux = mux->next;
+ for (i = 0; i < CONFIG_SYS_NUM_I2C_BUSES; i++) {
+ printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name);
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+ for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) {
+ if (i2c_bus[i].next_hop[j].chip == 0)
+ break;
+ printf("->%s@0x%2x:%d",
+ i2c_bus[i].next_hop[j].mux.name,
+ i2c_bus[i].next_hop[j].chip,
+ i2c_bus[i].next_hop[j].channel);
}
- device = device->next;
+#endif
+ printf("\n");
}
} else {
- I2C_MUX_DEVICE *dev;
-
- dev = i2c_mux_ident_muxstring ((uchar *)argv[1]);
- ret = 0;
+ /* show specific bus */
+ i = simple_strtoul(argv[1], NULL, 10);
+ if (i >= CONFIG_SYS_NUM_I2C_BUSES) {
+ printf("Invalid bus %d\n", i);
+ return -1;
+ }
+ printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name);
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+ for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) {
+ if (i2c_bus[i].next_hop[j].chip == 0)
+ break;
+ printf("->%s@0x%2x:%d",
+ i2c_bus[i].next_hop[j].mux.name,
+ i2c_bus[i].next_hop[j].chip,
+ i2c_bus[i].next_hop[j].channel);
+ }
+#endif
+ printf("\n");
}
- return ret;
+
+ return 0;
}
-#endif /* CONFIG_I2C_MUX */
+#endif
-#if defined(CONFIG_I2C_MULTI_BUS)
-static int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+/**
+ * do_i2c_bus_num() - Handle the "i2c dev" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
+int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- int bus_idx, ret=0;
+ int ret = 0;
+ unsigned int bus_no;
if (argc == 1)
/* querying current setting */
printf("Current bus is %d\n", i2c_get_bus_num());
else {
- bus_idx = simple_strtoul(argv[1], NULL, 10);
- printf("Setting bus to %d\n", bus_idx);
- ret = i2c_set_bus_num(bus_idx);
+ bus_no = simple_strtoul(argv[1], NULL, 10);
+ if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) {
+ printf("Invalid bus %d\n", bus_no);
+ return -1;
+ }
+ printf("Setting bus to %d\n", bus_no);
+ ret = i2c_set_bus_num(bus_no);
if (ret)
printf("Failure changing bus number (%d)\n", ret);
}
return ret;
}
-#endif /* CONFIG_I2C_MULTI_BUS */
-
-static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+#endif /* defined(CONFIG_SYS_I2C) */
+
+/**
+ * do_i2c_bus_speed() - Handle the "i2c speed" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
int speed, ret=0;
return ret;
}
-static int do_i2c_mm(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+/**
+ * do_i2c_mm() - Handle the "i2c mm" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+static int do_i2c_mm(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
return mod_i2c_mem (cmdtp, 1, flag, argc, argv);
}
-static int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+/**
+ * do_i2c_nm() - Handle the "i2c nm" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+static int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
return mod_i2c_mem (cmdtp, 0, flag, argc, argv);
}
-static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+/**
+ * do_i2c_reset() - Handle the "i2c reset" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero always.
+ */
+static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
+#if defined(CONFIG_SYS_I2C)
+ i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr);
+#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
return 0;
}
static cmd_tbl_t cmd_i2c_sub[] = {
-#if defined(CONFIG_I2C_MUX)
- U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_add_bus, "", ""),
-#endif /* CONFIG_I2C_MUX */
+#if defined(CONFIG_SYS_I2C)
+ U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""),
+#endif
U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
-#if defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || \
+ defined(CONFIG_I2C_MULTI_BUS)
U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
#endif /* CONFIG_I2C_MULTI_BUS */
+#if defined(CONFIG_I2C_EDID)
+ U_BOOT_CMD_MKENT(edid, 1, 1, do_edid, "", ""),
+#endif /* CONFIG_I2C_EDID */
U_BOOT_CMD_MKENT(loop, 3, 1, do_i2c_loop, "", ""),
U_BOOT_CMD_MKENT(md, 3, 1, do_i2c_md, "", ""),
U_BOOT_CMD_MKENT(mm, 2, 1, do_i2c_mm, "", ""),
U_BOOT_CMD_MKENT(nm, 2, 1, do_i2c_nm, "", ""),
U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
+ U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""),
U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""),
#if defined(CONFIG_CMD_SDRAM)
U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""),
U_BOOT_CMD_MKENT(speed, 1, 1, do_i2c_bus_speed, "", ""),
};
-static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+void i2c_reloc(void) {
+ fixup_cmdtable(cmd_i2c_sub, ARRAY_SIZE(cmd_i2c_sub));
+}
+#endif
+
+/**
+ * do_i2c() - Handle the "i2c" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
cmd_tbl_t *c;
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
/* Strip off leading 'i2c' command argument */
argc--;
argv++;
c = find_cmd_tbl(argv[0], &cmd_i2c_sub[0], ARRAY_SIZE(cmd_i2c_sub));
- if (c) {
- return c->cmd(cmdtp, flag, argc, argv);
- } else {
- cmd_usage(cmdtp);
- return 1;
- }
+ if (c)
+ return c->cmd(cmdtp, flag, argc, argv);
+ else
+ return CMD_RET_USAGE;
}
/***************************************************/
-
-U_BOOT_CMD(
- i2c, 6, 1, do_i2c,
- "I2C sub-system",
-#if defined(CONFIG_I2C_MUX)
- "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c "
-#endif /* CONFIG_I2C_MUX */
+#ifdef CONFIG_SYS_LONGHELP
+static char i2c_help_text[] =
+#if defined(CONFIG_SYS_I2C)
+ "bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n"
+#endif
"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
-#if defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || \
+ defined(CONFIG_I2C_MULTI_BUS)
"i2c dev [dev] - show or set current I2C bus\n"
#endif /* CONFIG_I2C_MULTI_BUS */
+#if defined(CONFIG_I2C_EDID)
+ "i2c edid chip - print EDID configuration information\n"
+#endif /* CONFIG_I2C_EDID */
"i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
"i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
"i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
- "i2c probe - show devices on the I2C bus\n"
+ "i2c probe [address] - test for and show device(s) on the I2C bus\n"
"i2c read chip address[.0, .1, .2] length memaddress - read to memory \n"
+ "i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n"
"i2c reset - re-init the I2C Controller\n"
#if defined(CONFIG_CMD_SDRAM)
"i2c sdram chip - print SDRAM configuration information\n"
#endif
- "i2c speed [speed] - show or set I2C bus speed"
-);
-
-#if defined(CONFIG_I2C_MUX)
-int i2c_mux_add_device(I2C_MUX_DEVICE *dev)
-{
- I2C_MUX_DEVICE *devtmp = i2c_mux_devices;
-
- if (i2c_mux_devices == NULL) {
- i2c_mux_devices = dev;
- return 0;
- }
- while (devtmp->next != NULL)
- devtmp = devtmp->next;
-
- devtmp->next = dev;
- return 0;
-}
-
-I2C_MUX_DEVICE *i2c_mux_search_device(int id)
-{
- I2C_MUX_DEVICE *device = i2c_mux_devices;
-
- while (device != NULL) {
- if (device->busid == id)
- return device;
- device = device->next;
- }
- return NULL;
-}
-
-/* searches in the buf from *pos the next ':'.
- * returns:
- * 0 if found (with *pos = where)
- * < 0 if an error occured
- * > 0 if the end of buf is reached
- */
-static int i2c_mux_search_next (int *pos, uchar *buf, int len)
-{
- while ((buf[*pos] != ':') && (*pos < len)) {
- *pos += 1;
- }
- if (*pos >= len)
- return 1;
- if (buf[*pos] != ':')
- return -1;
- return 0;
-}
-
-static int i2c_mux_get_busid (void)
-{
- int tmp = i2c_mux_busid;
-
- i2c_mux_busid ++;
- return tmp;
-}
-
-/* Analyses a Muxstring and sends immediately the
- Commands to the Muxes. Runs from Flash.
- */
-int i2c_mux_ident_muxstring_f (uchar *buf)
-{
- int pos = 0;
- int oldpos;
- int ret = 0;
- int len = strlen((char *)buf);
- int chip;
- uchar channel;
- int was = 0;
-
- while (ret == 0) {
- oldpos = pos;
- /* search name */
- ret = i2c_mux_search_next(&pos, buf, len);
- if (ret != 0)
- printf ("ERROR\n");
- /* search address */
- pos ++;
- oldpos = pos;
- ret = i2c_mux_search_next(&pos, buf, len);
- if (ret != 0)
- printf ("ERROR\n");
- buf[pos] = 0;
- chip = simple_strtoul((char *)&buf[oldpos], NULL, 16);
- buf[pos] = ':';
- /* search channel */
- pos ++;
- oldpos = pos;
- ret = i2c_mux_search_next(&pos, buf, len);
- if (ret < 0)
- printf ("ERROR\n");
- was = 0;
- if (buf[pos] != 0) {
- buf[pos] = 0;
- was = 1;
- }
- channel = simple_strtoul((char *)&buf[oldpos], NULL, 16);
- if (was)
- buf[pos] = ':';
- if (i2c_write(chip, 0, 0, &channel, 1) != 0) {
- printf ("Error setting Mux: chip:%x channel: \
- %x\n", chip, channel);
- return -1;
- }
- pos ++;
- oldpos = pos;
-
- }
-
- return 0;
-}
-
-/* Analyses a Muxstring and if this String is correct
- * adds a new I2C Bus.
- */
-I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf)
-{
- I2C_MUX_DEVICE *device;
- I2C_MUX *mux;
- int pos = 0;
- int oldpos;
- int ret = 0;
- int len = strlen((char *)buf);
- int was = 0;
-
- device = (I2C_MUX_DEVICE *)malloc (sizeof(I2C_MUX_DEVICE));
- device->mux = NULL;
- device->busid = i2c_mux_get_busid ();
- device->next = NULL;
- while (ret == 0) {
- mux = (I2C_MUX *)malloc (sizeof(I2C_MUX));
- mux->next = NULL;
- /* search name of mux */
- oldpos = pos;
- ret = i2c_mux_search_next(&pos, buf, len);
- if (ret != 0)
- printf ("%s no name.\n", __FUNCTION__);
- mux->name = (char *)malloc (pos - oldpos + 1);
- memcpy (mux->name, &buf[oldpos], pos - oldpos);
- mux->name[pos - oldpos] = 0;
- /* search address */
- pos ++;
- oldpos = pos;
- ret = i2c_mux_search_next(&pos, buf, len);
- if (ret != 0)
- printf ("%s no mux address.\n", __FUNCTION__);
- buf[pos] = 0;
- mux->chip = simple_strtoul((char *)&buf[oldpos], NULL, 16);
- buf[pos] = ':';
- /* search channel */
- pos ++;
- oldpos = pos;
- ret = i2c_mux_search_next(&pos, buf, len);
- if (ret < 0)
- printf ("%s no mux channel.\n", __FUNCTION__);
- was = 0;
- if (buf[pos] != 0) {
- buf[pos] = 0;
- was = 1;
- }
- mux->channel = simple_strtoul((char *)&buf[oldpos], NULL, 16);
- if (was)
- buf[pos] = ':';
- if (device->mux == NULL)
- device->mux = mux;
- else {
- I2C_MUX *muxtmp = device->mux;
- while (muxtmp->next != NULL) {
- muxtmp = muxtmp->next;
- }
- muxtmp->next = mux;
- }
- pos ++;
- oldpos = pos;
- }
- if (ret > 0) {
- /* Add Device */
- i2c_mux_add_device (device);
- return device;
- }
-
- return NULL;
-}
-
-int i2x_mux_select_mux(int bus)
-{
- I2C_MUX_DEVICE *dev;
- I2C_MUX *mux;
-
- if ((gd->flags & GD_FLG_RELOC) != GD_FLG_RELOC) {
- /* select Default Mux Bus */
-#if defined(CONFIG_SYS_I2C_IVM_BUS)
- i2c_mux_ident_muxstring_f ((uchar *)CONFIG_SYS_I2C_IVM_BUS);
-#else
- {
- unsigned char *buf;
- buf = (unsigned char *) getenv("EEprom_ivm");
- if (buf != NULL)
- i2c_mux_ident_muxstring_f (buf);
- }
+ "i2c speed [speed] - show or set I2C bus speed";
#endif
- return 0;
- }
- dev = i2c_mux_search_device(bus);
- if (dev == NULL)
- return -1;
- mux = dev->mux;
- while (mux != NULL) {
- if (i2c_write(mux->chip, 0, 0, &mux->channel, 1) != 0) {
- printf ("Error setting Mux: chip:%x channel: \
- %x\n", mux->chip, mux->channel);
- return -1;
- }
- mux = mux->next;
- }
- return 0;
-}
-#endif /* CONFIG_I2C_MUX */
+U_BOOT_CMD(
+ i2c, 6, 1, do_i2c,
+ "I2C sub-system",
+ i2c_help_text
+);
projects / J-u-boot.git / blobdiff