Move CONFIG_OF_LIBFDT to Kconfig

[J-u-boot.git] / include / configs / mcx.h

diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index b775ebd0edef662ed6dbf87143f02151edab372a..83202fc369eadb1daf136facfd8e501d500822cb 100644 (file)
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -16,19 +16,23 @@
 #define CONFIG_OMAP3_MCX               /* working with mcx */
 #define CONFIG_OMAP_GPIO
 #define CONFIG_OMAP_COMMON
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define MACH_TYPE_MCX                  3656
 #define CONFIG_MACH_TYPE       MACH_TYPE_MCX
 #define CONFIG_BOARD_LATE_INIT
 
+
 #define CONFIG_SYS_CACHELINE_SIZE      64
 
 #define CONFIG_EMIF4   /* The chip has EMIF4 controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
-#define CONFIG_OF_LIBFDT
 #define CONFIG_FIT
 
 /*
@@ -73,7 +77,6 @@
  */
 #define V_NS16550_CLK                  48000000        /* 48MHz (APLL96/2) */
 
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
 #define CONFIG_SYS_NS16550_CLK         V_NS16550_CLK
@@ -105,10 +108,11 @@
 #define CONFIG_USB_ULPI_VIEWPORT_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       57
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define        CONFIG_USB_HOST_ETHER
+#define        CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_MCS7830
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
 #define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
@@ -129,12 +133,6 @@
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_GPIO
-
-#undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
-#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
-#undef CONFIG_CMD_IMI          /* iminfo                       */
-#undef CONFIG_CMD_IMLS         /* List all found images        */
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
@@ -146,9 +144,7 @@
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_I2C_RTC_ADDR                0x68
 
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 /*
  * Board NAND Info.
  */
@@ -270,11 +266,8 @@
 /*
  * Miscellaneous configurable options
  */
-#define V_PROMPT                       "mcx # "
-
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT              V_PROMPT
 #define CONFIG_SYS_CBSIZE              1024/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -312,7 +305,10 @@
  */
 
 /* **** PISMO SUPPORT *** */
+#define CONFIG_NAND
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_GPMC_PREFETCH
 #define CONFIG_ENV_IS_IN_NAND
 #define SMNAND_ENV_OFFSET              0x180000 /* environment starts here */
 
@@ -369,7 +365,7 @@
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
 /* NAND boot config */