Convert CONFIG_CONS_INDEX et al to Kconfig

[J-u-boot.git] / configs / lx2160ardb_tfa_SECURE_BOOT_defconfig

diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index 94e103c5d1dd6bdafe1412df440679a63ed3abbb..d13474419af6a29837063e7fe781785e27324059 100644 (file)
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -1,8 +1,10 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LX2160ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_LEN=0x202000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ENV_SIZE=0x2000
@@ -21,10 +23,11 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
-# CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_MISC_INIT_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
@@ -39,9 +42,13 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
+CONFIG_DYNAMIC_DDR_CLK_FREQ=y
+CONFIG_DDR_ECC=y
+CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
@@ -57,6 +64,7 @@ CONFIG_SYS_CORTINA_NO_FW_UPLOAD=y
 CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_E1000=y
+CONFIG_MII=y
 CONFIG_FSL_LS_MDIO=y
 CONFIG_NVME=y
 CONFIG_PCI=y
@@ -66,6 +74,7 @@ CONFIG_DM_RTC=y
 CONFIG_RTC_PCF2127=y
 CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
+CONFIG_PL01X_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_NXP_FSPI=y