serial: Add a SERIAL config

[J-u-boot.git] / configs / corvus_defconfig

diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index 68c7bec60421778c7e73ce4ab4e6920e5c671ed5..db957a3c65dffcfa1be105f592233c159822f507 100644 (file)
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -1,26 +1,36 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
 CONFIG_SYS_THUMB_BUILD=y
 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
 # CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x72000000
 CONFIG_TARGET_CORVUS=y
-CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x800
-CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_SYS_MALLOC_LEN=0x460000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
+CONFIG_SPL_TEXT_BASE=0x300000
+CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
+CONFIG_ENV_OFFSET_REDUND=0x180000
+CONFIG_SYS_LOAD_ADDR=0x70000000
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_TEXT_BASE=0x300000
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_DRIVERS=y
+CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_BASE=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
@@ -38,19 +48,22 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_DOS_PARTITION=y
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
 CONFIG_ENV_IS_IN_NAND=y
-CONFIG_BLK=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_DFU_NAND=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
+CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
-CONFIG_NAND=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_PHYLIB=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
@@ -58,4 +71,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0908
 CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-# CONFIG_EFI_LOADER is not set