arch: arm: zynqmp: mp.c: tcminit halt both cores in split mode

[J-u-boot.git] / configs / at91sam9263ek_norflash_boot_defconfig

diff --git a/configs/at91sam9263ek_norflash_boot_defconfig b/configs/at91sam9263ek_norflash_boot_defconfig
index bd74eeae74ab890baef9a49e69cbba0cbb9ce794..d5db00448151c5e5c2b9009b8a59cc15da2350b5 100644 (file)
--- a/configs/at91sam9263ek_norflash_boot_defconfig
+++ b/configs/at91sam9263ek_norflash_boot_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x0000000
+CONFIG_TEXT_BASE=0x0000000
 CONFIG_SYS_MALLOC_LEN=0x50000
 CONFIG_TARGET_AT91SAM9263EK=y
 CONFIG_ATMEL_LEGACY=y
@@ -11,19 +11,20 @@ CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_ENV_ADDR=0x107E0000
 CONFIG_DEBUG_UART=y
+CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_SYS_MONITOR_BASE=0x10000000
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=281
 # CONFIG_CMD_BDI is not set
@@ -42,7 +43,6 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_ENV_ADDR_REDUND=0x107D0000
-CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
@@ -50,6 +50,7 @@ CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_FLASH_SHOW_PROGRESS=0
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_SYS_MAX_FLASH_SECT=256
 CONFIG_MTD_RAW_NAND=y
@@ -57,7 +58,6 @@ CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_DATAFLASH=y
-CONFIG_DM_ETH=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
@@ -70,6 +70,4 @@ CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_SYS_USB_OHCI_SLOT_NAME="at91sam9263"
-CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS=2
 CONFIG_USB_ATMEL=y
-CONFIG_ATMEL_LCD_BGR555=y