# SPDX-License-Identifier: GPL-2.0+
#
-VERSION = 2016
-PATCHLEVEL = 07
+VERSION = 2017
+PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc1
NAME =
# *DOCUMENTATION*
HOSTCC = cc
HOSTCXX = c++
-HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
+ $(if $(CONFIG_TOOLS_DEBUG),-g)
HOSTCXXFLAGS = -O2
ifeq ($(HOSTOS),cygwin)
no-dot-config-targets := clean clobber mrproper distclean \
help %docs check% coccicheck \
- ubootversion backup
+ ubootversion backup tests
config-targets := 0
mixed-targets := 0
endif
endif
+# These are set by the arch-specific config.mk. Make sure they are exported
+# so they can be used when building an EFI application.
+export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
+export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
+export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
+export CFLAGS_EFI # Compiler flags to add when building EFI app
+export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
+export EFI_TARGET # binutils target if EFI is natively supported
+
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
# that (or fail if absent). Otherwise, search for a linker script in a
# standard location.
include/config/auto.conf: ;
endif # $(dot-config)
+#
+# Xtensa linker script cannot be preprocessed with -ansi because of
+# preprocessor operations on strings that don't make C identifiers.
+#
+ifeq ($(CONFIG_XTENSA),)
+LDPPFLAGS += -ansi
+endif
+
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
KBUILD_CFLAGS += -Os
else
libs-y += drivers/net/phy/
libs-y += drivers/pci/
libs-y += drivers/power/ \
+ drivers/power/domain/ \
drivers/power/fuel_gauge/ \
drivers/power/mfd/ \
drivers/power/pmic/ \
libs-y += drivers/spi/
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
+libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/serial/
libs-y += drivers/usb/dwc3/
libs-y += test/
libs-y += test/dm/
libs-$(CONFIG_UT_ENV) += test/env/
+libs-$(CONFIG_UT_OVERLAY) += test/overlay/
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
endif
# Always append ALL so that arch config.mk's can add custom ones
-ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map u-boot.cfg binary_size_check
+ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
ifeq ($(CONFIG_SPL_FSL_PBL),y)
quiet_cmd_pad_cat = CAT $@
cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
+cfg: u-boot.cfg
+
all: $(ALL-y)
-ifeq ($(CONFIG_DM_I2C_COMPAT),y)
+ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
@echo "===================== WARNING ======================"
@echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
@echo "(possibly in a subsequent patch in your series)"
@echo "before sending patches to the mailing list."
@echo "===================================================="
endif
+ @# Check that this build does not use CONFIG options that we do not
+ @# know about unless they are in Kconfig. All the existing CONFIG
+ @# options are whitelisted, so new ones should not be added.
+ $(srctree)/scripts/check-config.sh u-boot.cfg \
+ $(srctree)/scripts/config_whitelist.txt ${srctree} 1>&2
PHONY += dtbs
dtbs: dts/dt.dtb
%.imx: %.bin
$(Q)$(MAKE) $(build)=arch/arm/imx-common $@
+%.vyb: %.imx
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
+
+quiet_cmd_copy = COPY $@
+ cmd_copy = cp $< $@
+
u-boot.dtb: dts/dt.dtb
$(call cmd,copy)
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
-u-boot.cfg: include/config.h FORCE
- $(call if_changed,cpp_cfg)
-
ifdef CONFIG_TPL
SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
else
$(call if_changed,objcopy)
endif
-ifneq ($(CONFIG_SUNXI),)
+ifneq ($(CONFIG_ARCH_SUNXI),)
OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
-T u-boot-payload.lds arch/x86/cpu/call32.o \
lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
- $(addprefix arch/$(ARCH)/lib/efi/,$(EFISTUB))
+ $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
$(call if_changed,u-boot_payload)
# ---------------------------------------------------------------------------
quiet_cmd_cpp_lds = LDS $@
-cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
+cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
u-boot.lds: $(LDSCRIPT) prepare FORCE
spl/u-boot-spl.bin: spl/u-boot-spl
@:
-spl/u-boot-spl: tools prepare $(if $(CONFIG_OF_SEPARATE),dts/dt.dtb)
+spl/u-boot-spl: tools prepare \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
$(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
spl/sunxi-spl.bin: spl/u-boot-spl
MRPROPER_DIRS += include/config include/generated spl tpl \
.tmp_objdiff
MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
- ctags etags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
+ ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
# clean - Delete most, but leave enough to build external modules
#
@echo ''
@echo 'Other generic targets:'
@echo ' all - Build all necessary images depending on configuration'
+ @echo ' tests - Build U-Boot for sandbox and run tests'
@echo '* u-boot - Build the bare u-boot'
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[oisS] - Build specified target only'
@echo ' cscope - Generate cscope index'
@echo ' ubootrelease - Output the release version string (use with make -s)'
@echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
+ @echo " cfg - Don't build, just create the .cfg files"
@echo ''
@echo 'Static analysers'
@echo ' checkstack - Generate a list of stack hogs'
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
@echo 'For further info see the ./README file'
+tests:
+ $(srctree)/test/run
# Documentation targets
# ---------------------------------------------------------------------------
projects / J-u-boot.git / blobdiff