85xx: remove the unused ddr_enable_ecc in the board file

[J-u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 983a3cdaae7a642dd8fc96657e814e4733534a63..befb6081a8221f0db92b36c2aa068d614f259fce 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -230,6 +230,7 @@ LIBS += drivers/mtd/libmtd.a
 LIBS += drivers/mtd/nand/libnand.a
 LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
 LIBS += drivers/mtd/onenand/libonenand.a
+LIBS += drivers/mtd/ubi/libubi.a
 LIBS += drivers/mtd/spi/libspi_flash.a
 LIBS += drivers/net/libnet.a
 LIBS += drivers/net/phy/libphy.a
@@ -1932,7 +1933,27 @@ ZPC1900_config: unconfig
 ## Coldfire
 #########################################################################
 
-M52277EVB_config:      unconfig
+M52277EVB_config \
+M52277EVB_spansion_config \
+M52277EVB_stmicro_config :     unconfig
+       @case "$@" in \
+       M52277EVB_config)               FLASH=SPANSION;; \
+       M52277EVB_spansion_config)      FLASH=SPANSION;; \
+       M52277EVB_stmicro_config)       FLASH=STMICRO;; \
+       esac; \
+       if [ "$${FLASH}" = "SPANSION" ] ; then \
+               echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
+               echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+               cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
+               $(XECHO) "... with SPANSION boot..." ; \
+       fi; \
+       if [ "$${FLASH}" = "STMICRO" ] ; then \
+               echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
+               echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
+               echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+               cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
+               $(XECHO) "... with ST Micro boot..." ; \
+       fi
        @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
 
 M5235EVB_config \
@@ -1992,6 +2013,9 @@ M5275EVB_config :         unconfig
 M5282EVB_config :              unconfig
        @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
 
+M53017EVB_config :             unconfig
+       @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
+
 M5329AFEE_config \
 M5329BFEE_config :     unconfig
        @case "$@" in \
@@ -2436,8 +2460,14 @@ TQM8560_config:          unconfig
 MPC8610HPCD_config:    unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
 
+MPC8641HPCN_36BIT_config \
 MPC8641HPCN_config:    unconfig
-       @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
+       @mkdir -p $(obj)include
+       @if [ "$(findstring _36BIT_,$@)" ] ; then \
+               echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
+               $(XECHO) "... enabling 36-bit physical addressing." ; \
+       fi
+       @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
 
 sbc8641d_config:       unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
@@ -2527,15 +2557,6 @@ shannon_config   :       unconfig
 at91rm9200dk_config    :       unconfig
        @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
 
-at91sam9261ek_config   :       unconfig
-       @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91
-
-at91sam9263ek_config   :       unconfig
-       @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91
-
-at91sam9rlek_config    :       unconfig
-       @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91
-
 cmc_pu2_config :       unconfig
        @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
 
@@ -2555,12 +2576,24 @@ mp2usb_config   :       unconfig
 ## Atmel ARM926EJ-S Systems
 #########################################################################
 
+afeb9260_config:       unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
+
 at91cap9adk_config     :       unconfig
        @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
 
 at91sam9260ek_config   :       unconfig
        @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91
 
+at91sam9261ek_config   :       unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91
+
+at91sam9263ek_config   :       unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91
+
+at91sam9rlek_config    :       unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91
+
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
 integratorap_config    \