arm: dts: k3-am654: remove duplicate wkup_i2c0

[J-u-boot.git] / arch / arm / dts / k3-am654-r5-base-board.dts

diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index 3d599a54138122f12c3dc4e4dfdaf64b9392f958..8c6cb147c821aa8cc2b971a0cb2fdda55727dfba 100644 (file)
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -115,13 +115,6 @@
                >;
        };
 
-       wkup_i2c0_pins_default: wkup-i2c0-pins-default {
-               pinctrl-single,pins = <
-                       AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
-                       AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
-               >;
-       };
-
        mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
                pinctrl-single,pins = <
                        AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
@@ -140,35 +133,6 @@
 };
 
 &main_pmx0 {
-       main_mmc0_pins_default: main_mmc0_pins_default {
-               pinctrl-single,pins = <
-                       AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0)      /* (B25) MMC0_CLK */
-                       AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0)        /* (B27) MMC0_CMD */
-                       AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0)        /* (A26) MMC0_DAT0 */
-                       AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0)        /* (E25) MMC0_DAT1 */
-                       AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0)        /* (C26) MMC0_DAT2 */
-                       AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0)        /* (A25) MMC0_DAT3 */
-                       AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0)        /* (E24) MMC0_DAT4 */
-                       AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0)        /* (A24) MMC0_DAT5 */
-                       AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0)        /* (B26) MMC0_DAT6 */
-                       AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0)        /* (D25) MMC0_DAT7 */
-                       AM65X_IOPAD(0x01b0, PIN_INPUT, 0)               /* (C25) MMC0_DS */
-               >;
-       };
-
-       main_mmc1_pins_default: main_mmc1_pins_default {
-               pinctrl-single,pins = <
-                       AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0)      /* (C27) MMC1_CLK */
-                       AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0)        /* (C28) MMC1_CMD */
-                       AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0)        /* (D28) MMC1_DAT0 */
-                       AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0)        /* (E27) MMC1_DAT1 */
-                       AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0)        /* (D26) MMC1_DAT2 */
-                       AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0)        /* (D27) MMC1_DAT3 */
-                       AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0)        /* (B24) MMC1_SDCD */
-                       AM65X_IOPAD(0x02e0, PIN_INPUT, 0)               /* (C24) MMC1_SDWP */
-               >;
-       };
-
        usb0_pins_default: usb0_pins_default {
                pinctrl-single,pins = <
                        AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
@@ -182,38 +146,32 @@
        pinctrl-0 = <&wkup_vtt_pins_default>;
 };
 
+/*
+ * MMC is probed to pull in firmware, so any clock
+ * or power-domain operation will fail as we do not
+ * have the firmware running at this point. Delete the
+ * power-domain properties to avoid making calls to
+ * SYSFW before it is loaded. Public ROM has already
+ * set it up for us anyway.
+ */
 &sdhci0 {
        clock-names = "clk_xin";
        clocks = <&clk_200mhz>;
-       pinctrl-0 = <&main_mmc0_pins_default>;
        /delete-property/ power-domains;
-       ti,driver-strength-ohm = <50>;
 };
 
+/*
+ * MMC is probed to pull in firmware, so any clock
+ * or power-domain operation will fail as we do not
+ * have the firmware running at this point. Delete the
+ * power-domain properties to avoid making calls to
+ * SYSFW before it is loaded. Public ROM has already
+ * set it up for us anyway.
+ */
 &sdhci1 {
        clock-names = "clk_xin";
        clocks = <&clk_200mhz>;
-       pinctrl-0 = <&main_mmc1_pins_default>;
        /delete-property/ power-domains;
-       ti,driver-strength-ohm = <50>;
-};
-
-&wkup_i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&wkup_i2c0_pins_default>;
-       clock-frequency = <400000>;
-
-       vdd_mpu: tps62363@60 {
-               compatible = "ti,tps62363";
-               reg = <0x60>;
-               regulator-name = "VDD_MPU";
-               regulator-min-microvolt = <500000>;
-               regulator-max-microvolt = <1770000>;
-               regulator-always-on;
-               regulator-boot-on;
-               ti,vsel0-state-high;
-               ti,vsel1-state-high;
-       };
 };
 
 &ospi0 {