configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / T2080RDB_NAND_defconfig

diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig
index 6566226abc8581a2908813accbada7d654e0cd88..63db57b809f8f4257e8c06784dac4a2eacc235ae 100644 (file)
--- a/configs/T2080RDB_NAND_defconfig
+++ b/configs/T2080RDB_NAND_defconfig
@@ -1,25 +1,25 @@
 CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_VID=y
-CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv"
-CONFIG_VOL_MONITOR_IR36021_READ=y
-CONFIG_VOL_MONITOR_IR36021_SET=y
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
+CONFIG_SYS_INIT_RAM_LOCK=y
 CONFIG_TARGET_T2080RDB=y
 CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_BOOK3E_HV=y
+CONFIG_SYS_CACHE_STASHING=y
 CONFIG_SYS_MPC85XX_NO_RESETVEC=y
 CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y
-<<<<<<< HEAD
-=======
+CONFIG_USE_UBOOTPATH=y
 CONFIG_PCIE1=y
 CONFIG_PCIE2=y
 CONFIG_PCIE3=y
@@ -28,21 +28,21 @@ CONFIG_VID=y
 CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv"
 CONFIG_VOL_MONITOR_IR36021_READ=y
 CONFIG_VOL_MONITOR_IR36021_SET=y
->>>>>>> Convert CONFIG_PCIE1 et al to Kconfig
+CONFIG_SYS_FSL_NUM_CC_PLLS=2
 CONFIG_SYS_MEMTEST_START=0x00200000
 CONFIG_SYS_MEMTEST_END=0x00400000
 CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_RAMBOOT_PBL=y
 CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xrdb/t2080_pbi.cfg"
 CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xrdb/t2080_nand_rcw.cfg"
 CONFIG_BOOTDELAY=10
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
-CONFIG_ARCH_MISC_INIT=y
+CONFIG_SYS_PBSIZE=276
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MAX_SIZE=0x28000
@@ -62,7 +62,6 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_CMD_MEMTEST=y
@@ -87,7 +86,7 @@ CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="FM1@DTSEC3"
-CONFIG_DM=y
+CONFIG_USE_ROOTPATH=y
 CONFIG_FSL_SATA_V2=y
 CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
@@ -111,15 +110,17 @@ CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_EMPTY_INFO=y
 CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_FLASH_QUIET_TEST=y
+CONFIG_SYS_MAX_FLASH_SECT=1024
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
 CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
@@ -127,7 +128,6 @@ CONFIG_PHY_CORTINA=y
 CONFIG_SYS_CORTINA_FW_IN_NAND=y
 CONFIG_CORTINA_FW_ADDR=0x200000
 CONFIG_PHY_REALTEK=y
-CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
@@ -137,7 +137,7 @@ CONFIG_PCIE_FSL=y
 CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_DS1307=y
-CONFIG_SYS_NS16550=y
+CONFIG_SYS_NS16550_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y