tny_a9260/tny_a9g20: update board to the new AT91 organization

[J-u-boot.git] / include / commproc.h

diff --git a/include/commproc.h b/include/commproc.h
index 12400e3eddbd9b232b2a3248511393fd2cdadbf8..8b8cc45dadfa03b7098621aa6810e8c642652841 100644 (file)
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -62,7 +62,7 @@
  * as data ram for buffer descriptors, which is all we use right now.
  * Currently the first 512 and last 256 bytes are used for microcode.
  */
-#ifdef  CFG_ALLOC_DPRAM
+#ifdef  CONFIG_SYS_ALLOC_DPRAM
 
 #define CPM_DATAONLY_BASE      ((uint)0x0800)
 #define CPM_DATAONLY_SIZE      ((uint)0x0700)
@@ -81,16 +81,16 @@
 
 #endif
 
-#ifndef CFG_CPM_POST_WORD_ADDR
+#ifndef CONFIG_SYS_CPM_POST_WORD_ADDR
 #define CPM_POST_WORD_ADDR     0x07FC
 #else
-#define CPM_POST_WORD_ADDR     CFG_CPM_POST_WORD_ADDR
+#define CPM_POST_WORD_ADDR     CONFIG_SYS_CPM_POST_WORD_ADDR
 #endif
 
-#ifndef CFG_CPM_BOOTCOUNT_ADDR
+#ifndef CONFIG_SYS_CPM_BOOTCOUNT_ADDR
 #define CPM_BOOTCOUNT_ADDR     (CPM_POST_WORD_ADDR - 2*sizeof(ulong))
 #else
-#define CPM_BOOTCOUNT_ADDR     CFG_CPM_BOOTCOUNT_ADDR
+#define CPM_BOOTCOUNT_ADDR     CONFIG_SYS_CPM_BOOTCOUNT_ADDR
 #endif
 
 #define BD_IIC_START   ((uint) 0x0400) /* <- please use CPM_I2C_BASE !! */
@@ -108,7 +108,7 @@ typedef struct cpm_buf_desc {
        uint    cbd_bufaddr;    /* Buffer address in host memory */
 } cbd_t;
 
-#define BD_SC_EMPTY    ((ushort)0x8000)        /* Recieve is empty */
+#define BD_SC_EMPTY    ((ushort)0x8000)        /* Receive is empty */
 #define BD_SC_READY    ((ushort)0x8000)        /* Transmit is ready */
 #define BD_SC_WRAP     ((ushort)0x2000)        /* Last buffer descriptor */
 #define BD_SC_INTRPT   ((ushort)0x1000)        /* Interrupt on change */
@@ -159,6 +159,8 @@ typedef struct smc_uart {
        ushort  smc_brkec;      /* rcv'd break condition counter */
        ushort  smc_brkcr;      /* xmt break count register */
        ushort  smc_rmask;      /* Temporary bit mask */
+       u_char  res1[8];
+       ushort  smc_rpbase;     /* Relocation pointer */
 } smc_uart_t;
 
 /* Function code bits.
@@ -577,34 +579,6 @@ typedef struct scc_enet {
 
 /*********************************************************************/
 
-
-/***  CCM  and  PCU E  ***********************************************/
-
-/* The PCU E  and  CCM  use the FEC on a MPC860T for Ethernet */
-
-#if defined (CONFIG_PCU_E) || defined(CONFIG_CCM)
-
-#define        FEC_ENET        /* use FEC for EThernet */
-#undef SCC_ENET
-
-#define PD_MII_TXD1    ((ushort)0x1000)        /* PD  3 */
-#define PD_MII_TXD2    ((ushort)0x0800)        /* PD  4 */
-#define PD_MII_TXD3    ((ushort)0x0400)        /* PD  5 */
-#define PD_MII_RX_DV   ((ushort)0x0200)        /* PD  6 */
-#define PD_MII_RX_ERR  ((ushort)0x0100)        /* PD  7 */
-#define PD_MII_RX_CLK  ((ushort)0x0080)        /* PD  8 */
-#define PD_MII_TXD0    ((ushort)0x0040)        /* PD  9 */
-#define PD_MII_RXD0    ((ushort)0x0020)        /* PD 10 */
-#define PD_MII_TX_ERR  ((ushort)0x0010)        /* PD 11 */
-#define PD_MII_MDC     ((ushort)0x0008)        /* PD 12 */
-#define PD_MII_RXD1    ((ushort)0x0004)        /* PD 13 */
-#define PD_MII_RXD2    ((ushort)0x0002)        /* PD 14 */
-#define PD_MII_RXD3    ((ushort)0x0001)        /* PD 15 */
-
-#define PD_MII_MASK    ((ushort)0x1FFF)        /* PD 3...15 */
-
-#endif /* CONFIG_PCU_E, CONFIG_CCM */
-
 /***  ELPT860 *********************************************************/
 
 #ifdef CONFIG_ELPT860
@@ -784,19 +758,19 @@ typedef struct scc_enet {
 #undef SCC_ENET
 #define        FEC_ENET
 
-#define PD_MII_TXD1    ((ushort)0x1000)        /* PD  3        */
-#define PD_MII_TXD2    ((ushort)0x0800)        /* PD  4        */
-#define PD_MII_TXD3    ((ushort)0x0400)        /* PD  5        */
-#define PD_MII_RX_DV   ((ushort)0x0200)        /* PD  6        */
-#define PD_MII_RX_ERR  ((ushort)0x0100)        /* PD  7        */
-#define PD_MII_RX_CLK  ((ushort)0x0080)        /* PD  8        */
-#define PD_MII_TXD0    ((ushort)0x0040)        /* PD  9        */
-#define PD_MII_RXD0    ((ushort)0x0020)        /* PD 10        */
-#define PD_MII_TX_ERR  ((ushort)0x0010)        /* PD 11        */
-#define PD_MII_MDC     ((ushort)0x0008)        /* PD 12        */
-#define PD_MII_RXD1    ((ushort)0x0004)        /* PD 13        */
-#define PD_MII_RXD2    ((ushort)0x0002)        /* PD 14        */
-#define PD_MII_RXD3    ((ushort)0x0001)        /* PD 15        */
+#define PD_MII_TXD1    ((ushort)0x1000)        /* PD  3        */
+#define PD_MII_TXD2    ((ushort)0x0800)        /* PD  4        */
+#define PD_MII_TXD3    ((ushort)0x0400)        /* PD  5        */
+#define PD_MII_RX_DV   ((ushort)0x0200)        /* PD  6        */
+#define PD_MII_RX_ERR  ((ushort)0x0100)        /* PD  7        */
+#define PD_MII_RX_CLK  ((ushort)0x0080)        /* PD  8        */
+#define PD_MII_TXD0    ((ushort)0x0040)        /* PD  9        */
+#define PD_MII_RXD0    ((ushort)0x0020)        /* PD 10        */
+#define PD_MII_TX_ERR  ((ushort)0x0010)        /* PD 11        */
+#define PD_MII_MDC     ((ushort)0x0008)        /* PD 12        */
+#define PD_MII_RXD1    ((ushort)0x0004)        /* PD 13        */
+#define PD_MII_RXD2    ((ushort)0x0002)        /* PD 14        */
+#define PD_MII_RXD3    ((ushort)0x0001)        /* PD 15        */
 #define PD_MII_MASK    ((ushort)0x1FFF)        /* PD 3-15      */
 #endif /* CONFIG_GEN860T */
 
@@ -826,38 +800,6 @@ typedef struct scc_enet {
 
 #endif /* CONFIG_GENIETV */
 
-/*** GTH ******************************************************/
-
-#ifdef CONFIG_GTH
-#ifdef CONFIG_FEC_ENET
-#define        FEC_ENET        /* use FEC for EThernet */
-#endif /* CONFIG_FEC_ETHERNET */
-
-/* This ENET stuff is for GTH 10 Mbit ( SCC ) */
-#define        PROFF_ENET      PROFF_SCC1
-#define        CPM_CR_ENET     CPM_CR_CH_SCC1
-#define        SCC_ENET        0
-
-#define PA_ENET_RXD    ((ushort)0x0001) /* PA15 */
-#define PA_ENET_TXD    ((ushort)0x0002) /* PA14 */
-#define PA_ENET_TCLK   ((ushort)0x0800) /* PA4 */
-#define PA_ENET_RCLK   ((ushort)0x0400) /* PA5 */
-
-#define PB_ENET_TENA   ((uint)0x00001000) /* PB19 */
-
-#define PC_ENET_CLSN   ((ushort)0x0010) /* PC11 */
-#define PC_ENET_RENA   ((ushort)0x0020) /* PC10 */
-
-/* NOTE. This is reset for 10Mbit port only */
-#define PC_ENET_RESET  ((ushort)0x0100)        /* PC 7 */
-
-#define SICR_ENET_MASK ((uint)0x000000ff)
-
-/* TCLK PA4 -->CLK4, RCLK PA5 -->CLK3 */
-#define SICR_ENET_CLKRT        ((uint)0x00000037)
-
-#endif /* CONFIG_GTH */
-
 /*** HERMES-PRO ******************************************************/
 
 /* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */
@@ -1120,6 +1062,32 @@ typedef struct scc_enet {
 #define SICR_ENET_CLKRT        ((uint)0x0000003d)
 #endif /* CONFIG_MBX */
 
+/***  KM8XX  *********************************************************/
+
+/* The KM8XX Service Module uses SCC3 for Ethernet */
+
+#ifdef CONFIG_KM8XX
+#define PROFF_ENET     PROFF_SCC3              /* Ethernet on SCC3 */
+#define CPM_CR_ENET    CPM_CR_CH_SCC3
+#define SCC_ENET       2
+#define PA_ENET_RXD    ((ushort)0x0010)        /* PA 11 */
+#define PA_ENET_TXD    ((ushort)0x0020)        /* PA 10 */
+#define PA_ENET_RCLK   ((ushort)0x1000)        /* PA  3 CLK 5 */
+#define PA_ENET_TCLK   ((ushort)0x2000)        /* PA  2 CLK 6 */
+
+#define PC_ENET_TENA   ((ushort)0x0004)        /* PC 13 */
+
+#define PC_ENET_RENA   ((ushort)0x0200)        /* PC  6 */
+#define PC_ENET_CLSN   ((ushort)0x0100)        /* PC  7 */
+
+/* Control bits in the SICR to route TCLK (CLK6) and RCLK (CLK5) to
+ * SCC3.  Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero.
+ */
+#define SICR_ENET_MASK ((uint)0x00FF0000)
+#define SICR_ENET_CLKRT        ((uint)0x00250000)
+#endif /* CONFIG_KM8XX */
+
+
 /***  MHPC  ********************************************************/
 
 #if defined(CONFIG_MHPC)
@@ -1420,7 +1388,9 @@ typedef struct scc_enet {
  */
 #define        PROFF_ENET      PROFF_SCC2
 #define        CPM_CR_ENET     CPM_CR_CH_SCC2
+#if (!defined(CONFIG_TK885D))  /* TK885D does not use SCC Ethernet */
 #define        SCC_ENET        1
+#endif
 #define PA_ENET_RXD    ((ushort)0x0004)        /* PA 13 */
 #define PA_ENET_TXD    ((ushort)0x0008)        /* PA 12 */
 #define PA_ENET_RCLK   ((ushort)0x0100)        /* PA  7 */