arm: at91: configs: Enable CONFIG_SYS_NAND_USE_FLASH_BBT on all boards

[J-u-boot.git] / configs / A20-OLinuXino-Lime_defconfig

diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index 1bc0b7fbb9b1293c04fa17e58846d4a0abadd3b3..d6bd96255968742fd6cc052cb600b426ec49db07 100644 (file)
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
 CONFIG_MMC0_CD_PIN="PH1"
@@ -8,17 +9,14 @@ CONFIG_SATAPWR="PC3"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_ISO_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI_AHCI=y
+CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_MII=y
 CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y