configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / mx7ulp_com_defconfig

diff --git a/configs/mx7ulp_com_defconfig b/configs/mx7ulp_com_defconfig
index 62992fecdf26df04b6dfc2ee0e97cd3894065ae8..a49cb2a728f9c35f4c7dd07af33670ddef266d82 100644 (file)
--- a/configs/mx7ulp_com_defconfig
+++ b/configs/mx7ulp_com_defconfig
@@ -1,15 +1,24 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX7ULP=y
-CONFIG_SYS_TEXT_BASE=0x67800000
+CONFIG_TEXT_BASE=0x67800000
+CONFIG_SYS_MALLOC_LEN=0x800000
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_SF_DEFAULT_SPEED=40000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xC0000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-com"
 CONFIG_LDO_ENABLED_MODE=y
 CONFIG_TARGET_MX7ULP_COM=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ea/mx7ulp_com/imximage.cfg"
+CONFIG_SYS_BOOTM_LEN=0x1000000
+CONFIG_SYS_LOAD_ADDR=0x60800000
+CONFIG_HAS_BOARD_SIZE_LIMIT=y
+CONFIG_BOARD_SIZE_LIMIT=785408
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="if run loadimage; then run mmcboot; fi"
 CONFIG_DEFAULT_FDT_FILE="imx7ulp-com"
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
@@ -24,17 +33,15 @@ CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
-# CONFIG_NET is not set
-CONFIG_DM=y
+CONFIG_NO_NET=y
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_IMX_RGPIO2P=y
 # CONFIG_MXC_GPIO is not set
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_IMX_LPI2C=y
 CONFIG_FSL_USDHC=y
+CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=40000000
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX7ULP=y