* Copyright (C) 2007 MontaVista Software, Inc.
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
-
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_FSL_UPM)
#include <common.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <linux/mtd/fsl_upm.h>
#include <nand.h>
-#define FSL_UPM_MxMR_OP_NO (0 << 28) /* normal operation */
-#define FSL_UPM_MxMR_OP_WA (1 << 28) /* write array */
-#define FSL_UPM_MxMR_OP_RA (2 << 28) /* read array */
-#define FSL_UPM_MxMR_OP_RP (3 << 28) /* run pattern */
-
static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
{
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_RP | pat_offset);
+ clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset);
+ (void)in_be32(upm->mxmr);
}
static void fsl_upm_end_pattern(struct fsl_upm *upm)
{
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
- while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
+ clrbits_be32(upm->mxmr, MxMR_OP_RUNP);
+
+ while (in_be32(upm->mxmr) & MxMR_OP_RUNP)
eieio();
}
-static void fsl_upm_run_pattern(struct fsl_upm *upm, int width, u32 cmd)
+static void fsl_upm_run_pattern(struct fsl_upm *upm, int width,
+ void __iomem *io_addr, u32 mar)
{
- out_be32(upm->mar, cmd << (32 - width * 8));
- out_8(upm->io_addr, 0x0);
+ out_be32(upm->mar, mar);
+ (void)in_be32(upm->mar);
+ switch (width) {
+ case 8:
+ out_8(io_addr, 0x0);
+ break;
+ case 16:
+ out_be16(io_addr, 0x0);
+ break;
+ case 32:
+ out_be32(io_addr, 0x0);
+ break;
+ }
}
-static void fsl_upm_setup(struct fsl_upm *upm)
+static void fun_wait(struct fsl_upm_nand *fun)
{
- int i;
-
- /* write upm array */
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_WA);
-
- for (i = 0; i < 64; i++) {
- out_be32(upm->mdr, upm->array[i]);
- out_8(upm->io_addr, 0x0);
+ if (fun->dev_ready) {
+ while (!fun->dev_ready(fun->chip_nr))
+ debug("unexpected busy state\n");
+ } else {
+ /*
+ * If the R/B pin is not connected,
+ * a short delay is necessary.
+ */
+ udelay(1);
}
-
- /* normal operation */
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
- while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
- eieio();
}
-static void fun_cmdfunc(struct mtd_info *mtd, unsigned command, int column,
- int page_addr)
+#if CONFIG_SYS_NAND_MAX_CHIPS > 1
+static void fun_select_chip(struct mtd_info *mtd, int chip_nr)
{
struct nand_chip *chip = mtd->priv;
struct fsl_upm_nand *fun = chip->priv;
- fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
-
- if (command == NAND_CMD_SEQIN) {
- int readcmd;
-
- if (column >= mtd->oobblock) {
- /* OOB area */
- column -= mtd->oobblock;
- readcmd = NAND_CMD_READOOB;
- } else if (column < 256) {
- /* First 256 bytes --> READ0 */
- readcmd = NAND_CMD_READ0;
- } else {
- column -= 256;
- readcmd = NAND_CMD_READ1;
- }
- fsl_upm_run_pattern(&fun->upm, fun->width, readcmd);
+ if (chip_nr >= 0) {
+ fun->chip_nr = chip_nr;
+ chip->IO_ADDR_R = chip->IO_ADDR_W =
+ fun->upm.io_addr + fun->chip_offset * chip_nr;
+ } else if (chip_nr == -1) {
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
}
+}
+#endif
- fsl_upm_run_pattern(&fun->upm, fun->width, command);
-
- fsl_upm_end_pattern(&fun->upm);
+static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_upm_nand *fun = chip->priv;
+ void __iomem *io_addr;
+ u32 mar;
- fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
+ if (!(ctrl & fun->last_ctrl)) {
+ fsl_upm_end_pattern(&fun->upm);
- if (column != -1)
- fsl_upm_run_pattern(&fun->upm, fun->width, column);
+ if (cmd == NAND_CMD_NONE)
+ return;
- if (page_addr != -1) {
- fsl_upm_run_pattern(&fun->upm, fun->width, page_addr);
- fsl_upm_run_pattern(&fun->upm, fun->width,
- (page_addr >> 8) & 0xFF);
- if (chip->chipsize > (32 << 20)) {
- fsl_upm_run_pattern(&fun->upm, fun->width,
- (page_addr >> 16) & 0x0f);
- }
+ fun->last_ctrl = ctrl & (NAND_ALE | NAND_CLE);
}
- fsl_upm_end_pattern(&fun->upm);
-
- if (fun->wait_pattern) {
- /*
- * Some boards/chips needs this. At least on MPC8360E-RDK we
- * need it. Probably weird chip, because I don't see any need
- * for this on MPC8555E + Samsung K9F1G08U0A. Usually here are
- * 0-2 unexpected busy states per block read.
- */
- while (!fun->dev_ready())
- debug("unexpected busy state\n");
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_ALE)
+ fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
+ else if (ctrl & NAND_CLE)
+ fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
}
-}
-static void nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
- struct nand_chip *chip = mtd->priv;
-
- out_8(chip->IO_ADDR_W, byte);
+ mar = cmd << (32 - fun->width);
+ io_addr = fun->upm.io_addr;
+#if CONFIG_SYS_NAND_MAX_CHIPS > 1
+ if (fun->chip_nr > 0) {
+ io_addr += fun->chip_offset * fun->chip_nr;
+ if (fun->upm_mar_chip_offset)
+ mar |= fun->upm_mar_chip_offset * fun->chip_nr;
+ }
+#endif
+ fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
+
+ /*
+ * Some boards/chips needs this. At least the MPC8360E-RDK
+ * needs it. Probably weird chip, because I don't see any
+ * need for this on MPC8555E + Samsung K9F1G08U0A. Usually
+ * here are 0-2 unexpected busy states per block read.
+ */
+ if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
+ fun_wait(fun);
}
-static u8 nand_read_byte(struct mtd_info *mtd)
+static u8 upm_nand_read_byte(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
return in_8(chip->IO_ADDR_R);
}
-static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static void upm_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *chip = mtd->priv;
+ struct fsl_upm_nand *fun = chip->priv;
- for (i = 0; i < len; i++)
+ for (i = 0; i < len; i++) {
out_8(chip->IO_ADDR_W, buf[i]);
+ if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BYTE)
+ fun_wait(fun);
+ }
+
+ if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BUFFER)
+ fun_wait(fun);
}
-static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
int i;
struct nand_chip *chip = mtd->priv;
buf[i] = in_8(chip->IO_ADDR_R);
}
-static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static int upm_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *chip = mtd->priv;
return 0;
}
-static void nand_hwcontrol(struct mtd_info *mtd, int cmd)
-{
-}
-
static int nand_dev_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
struct fsl_upm_nand *fun = chip->priv;
- return fun->dev_ready();
+ return fun->dev_ready(fun->chip_nr);
}
int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
{
- /* yet only 8 bit accessors implemented */
- if (fun->width != 1)
+ if (fun->width != 8 && fun->width != 16 && fun->width != 32)
return -ENOSYS;
- fsl_upm_setup(&fun->upm);
+ fun->last_ctrl = NAND_CLE;
chip->priv = fun;
chip->chip_delay = fun->chip_delay;
- chip->eccmode = NAND_ECC_SOFT;
- chip->cmdfunc = fun_cmdfunc;
- chip->hwcontrol = nand_hwcontrol;
- chip->read_byte = nand_read_byte;
- chip->read_buf = nand_read_buf;
- chip->write_byte = nand_write_byte;
- chip->write_buf = nand_write_buf;
- chip->verify_buf = nand_verify_buf;
- chip->dev_ready = nand_dev_ready;
+ chip->ecc.mode = NAND_ECC_SOFT;
+ chip->cmd_ctrl = fun_cmd_ctrl;
+#if CONFIG_SYS_NAND_MAX_CHIPS > 1
+ chip->select_chip = fun_select_chip;
+#endif
+ chip->read_byte = upm_nand_read_byte;
+ chip->read_buf = upm_nand_read_buf;
+ chip->write_buf = upm_nand_write_buf;
+ chip->verify_buf = upm_nand_verify_buf;
+ if (fun->dev_ready)
+ chip->dev_ready = nand_dev_ready;
return 0;
}
-#endif /* CONFIG_CMD_NAND */
projects / J-u-boot.git / blobdiff