configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / stm32mp15_basic_defconfig

diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index be553ad3c36863f873be364f0fb6dcbb5b01e1dd..dcf44bcc0e767f499c24e9d729fdc013ca1578ab 100644 (file)
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -7,19 +7,20 @@ CONFIG_ENV_OFFSET=0x280000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
-CONFIG_SPL_TEXT_BASE=0x2FFC2500
 CONFIG_SPL_MMC=y
 CONFIG_SPL_STACK=0x30000000
+CONFIG_SPL_TEXT_BASE=0x2FFC2500
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SPL=y
 CONFIG_CMD_STM32KEY=y
 CONFIG_TYPEC_STUSB160X=y
-CONFIG_TARGET_ST_STM32MP15x=y
+CONFIG_TARGET_ST_STM32MP15X=y
 CONFIG_ENV_OFFSET_REDUND=0x2C0000
 CONFIG_CMD_STM32PROG=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 # CONFIG_ARMV7_VIRT is not set
-CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc4000000
 CONFIG_FIT=y
@@ -27,6 +28,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_FDT_SIMPLEFB=y
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_SYS_PBSIZE=1050
 CONFIG_SPL_LOG=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
@@ -36,8 +38,9 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MTD=y
@@ -46,8 +49,6 @@ CONFIG_SPL_POWER=y
 CONFIG_SPL_SPI_FLASH_MTD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
 CONFIG_SYS_PROMPT="STM32MP> "
-CONFIG_SYS_PBSIZE=1050
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_CMD_ADTIMG=y
 CONFIG_CMD_ERASEENV=y
 CONFIG_CMD_NVEDIT_EFI=y
@@ -97,6 +98,8 @@ CONFIG_TFTP_TSIZE=y
 CONFIG_USE_SERVERIP=y
 CONFIG_SERVERIP="192.168.1.1"
 CONFIG_STM32_ADC=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_GPIO=y
 CONFIG_SET_DFU_ALT_INFO=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
@@ -188,6 +191,3 @@ CONFIG_WDT=y
 CONFIG_WDT_STM32MP=y
 # CONFIG_BINMAN_FDT is not set
 CONFIG_ERRNO_STR=y
-# CONFIG_LMB_USE_MAX_REGIONS is not set
-CONFIG_LMB_MEMORY_REGIONS=2
-CONFIG_LMB_RESERVED_REGIONS=16