Merge branch 'master' of git://www.denx.de/git/u-boot-imx

[J-u-boot.git] / include / configs / MPC832XEMDS.h

diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 32e05af8ab7628906e2ac9ff8d76df6bcc79ae93..12a47b215fb244ca3df919ce946936d540f72c68 100644 (file)
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -12,7 +12,6 @@
  */
 #define CONFIG_E300            1       /* E300 family */
 #define CONFIG_QE              1       /* Has QE */
-#define CONFIG_MPC83xx         1       /* MPC83xx family */
 #define CONFIG_MPC832x         1       /* MPC832x CPU specific */
 #define CONFIG_MPC832XEMDS     1       /* MPC832XEMDS board specific */
 
@@ -167,7 +166,7 @@
 #endif
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024)    /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)    /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (256 * 1024)    /* Reserved for malloc */
 
 /*
@@ -291,7 +290,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -304,13 +302,6 @@
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -344,11 +335,9 @@
 #define CONFIG_SYS_PCI_SLV_MEM_BUS     0x00000000
 #define CONFIG_SYS_PCI_SLV_MEM_SIZE    0x80000000
 
-
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_83XX_PCI_STREAMING
 
 #undef CONFIG_EEPRO100
@@ -414,26 +403,14 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_ASKENV
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
-
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
 /*
@@ -441,7 +418,6 @@
  */
 #define CONFIG_SYS_LONGHELP    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "   /* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
        #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
@@ -454,7 +430,6 @@
 #define CONFIG_SYS_MAXARGS     16      /* max number of command args */
                                /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -463,6 +438,7 @@
  */
                                        /* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTMAPSZ           (256 << 20)
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /*
  * Core HID Setup
@@ -576,7 +552,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*
@@ -592,7 +567,6 @@
 
 #define CONFIG_LOADADDR        800000  /* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
@@ -622,7 +596,6 @@
        "tftp $fdtaddr $fdtfile;"                                       \
        "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-
 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 
 #endif /* __CONFIG_H */