i2c: Convert CONFIG_POWER_I2C et al to Kconfig

[J-u-boot.git] / include / configs / tqma6.h

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 8cc0018943d12a9958ae8a7b3ba2ae319423e103..1efe9d57a84ee64e834a647e8e9acebdf90db9b9 100644 (file)
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -1,15 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013, 2014, 2017 Markus Niebel <[email protected]>
  *
  * Configuration settings for the TQ Systems TQMa6<Q,D,DL,S> module.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 #include <linux/kconfig.h>
+#include <linux/stringify.h>
+
 /* SPL */
 /* #if defined(CONFIG_SPL_BUILD) */
 /* common IMX6 SPL configuration */
@@ -18,11 +19,6 @@
 /* #endif */
 
 /* place code in last 4 MiB of RAM */
-#if defined(CONFIG_TQMA6S)
-#define CONFIG_SYS_TEXT_BASE           0x2fc00000
-#elif defined(CONFIG_TQMA6Q) || defined(CONFIG_TQMA6DL)
-#define CONFIG_SYS_TEXT_BASE           0x4fc00000
-#endif
 
 #include "mx6_common.h"
 
@@ -34,70 +30,42 @@
 #define PHYS_SDRAM_SIZE                        (SZ_1G)
 #endif
 
-#define CONFIG_MXC_UART
-
-/* SPI */
-#define CONFIG_MXC_SPI
-
 /* SPI Flash */
 
 #define TQMA6_SPI_FLASH_SECTOR_SIZE    SZ_64K
 
-#define CONFIG_SF_DEFAULT_BUS  0
-#define CONFIG_SF_DEFAULT_CS   0
-#define CONFIG_SF_DEFAULT_SPEED        50000000
-#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
-
 /* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED           100000
 
 /* I2C EEPROM (M24C64) */
-#define CONFIG_SYS_I2C_EEPROM_ADDR                     0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN                 2
 #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS          5 /* 32 Bytes */
 #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS      20
 
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
+#if !defined(CONFIG_DM_PMIC)
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
 #define TQMA6_PFUZE100_I2C_BUS         2
+#endif
 
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
 /* USB Configs */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
-#define CONFIG_MII
 
 #define CONFIG_ARP_TIMEOUT             200UL
 
-#define CONFIG_ENV_SIZE                        (SZ_8K)
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * SZ_1M)
-
 #if defined(CONFIG_TQMA6X_MMC_BOOT)
 
 #define TQMA6_UBOOT_OFFSET             SZ_1K
 #define TQMA6_UBOOT_SECTOR_START       0x2
 #define TQMA6_UBOOT_SECTOR_COUNT       0x7fe
 
-#define CONFIG_ENV_OFFSET              SZ_1M
-#define CONFIG_SYS_MMC_ENV_DEV         0
-
 #define TQMA6_FDT_OFFSET               (2 * SZ_1M)
 #define TQMA6_FDT_SECTOR_START         0x1000
 #define TQMA6_FDT_SECTOR_COUNT         0x800
@@ -165,17 +133,6 @@
 #define TQMA6_UBOOT_SIZE               (TQMA6_UBOOT_SECTOR_SIZE * \
                                         TQMA6_UBOOT_SECTOR_COUNT)
 
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET              (TQMA6_UBOOT_SIZE)
-#define CONFIG_ENV_SECT_SIZE           TQMA6_SPI_FLASH_SECTOR_SIZE
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
-                                        CONFIG_ENV_SECT_SIZE)
-
-#define CONFIG_ENV_SPI_BUS             (CONFIG_SF_DEFAULT_BUS)
-#define CONFIG_ENV_SPI_CS              (CONFIG_SF_DEFAULT_CS)
-#define CONFIG_ENV_SPI_MAX_HZ          (CONFIG_SF_DEFAULT_SPEED)
-#define CONFIG_ENV_SPI_MODE            (CONFIG_SF_DEFAULT_MODE)
-
 #define TQMA6_FDT_OFFSET               (CONFIG_ENV_OFFSET_REDUND + \
                                         CONFIG_ENV_SECT_SIZE)
 #define TQMA6_FDT_SECT_SIZE            (TQMA6_SPI_FLASH_SECTOR_SIZE)
@@ -334,7 +291,6 @@
        TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS                                      \
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM