ARMv8: add GOT sections to the list of sections copied

[J-u-boot.git] / include / configs / BSC9132QDS.h

diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 0e0eefb8b9d0cc8ea2d147cf4647d162acbceaf9..b23ec8fc8b03c8546cf2b11053ea55a09f6d0ea6 100644 (file)
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -11,10 +11,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifdef CONFIG_BSC9132QDS
-#define CONFIG_BSC9132
-#endif
-
 #define CONFIG_MISC_INIT_R
 
 #ifdef CONFIG_SDCARD
@@ -24,7 +20,6 @@
 #define CONFIG_SYS_TEXT_BASE           0x11000000
 #define CONFIG_RESET_VECTOR_ADDRESS    0x110bfffc
 #endif
-#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769     1
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_SYS_RAMBOOT
@@ -73,10 +68,6 @@
 #endif
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE                   /* BOOKE */
-#define CONFIG_E500                    /* BOOKE e500 family */
-#define CONFIG_FSL_IFC                 /* Enable IFC Support */
-#define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 #define CONFIG_SYS_HAS_SERDES          /* common SERDES init code */
 
 #if defined(CONFIG_PCI)
@@ -104,10 +95,8 @@
 #define CONFIG_SYS_PCIE1_IO_PHYS       0xC0010000
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif
 
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_TSEC_ENET /* ethernet */
 
@@ -132,7 +121,6 @@
 #define CONFIG_SYS_MEMTEST_END         0x01ffffff
 
 /* DDR Setup */
-#define CONFIG_SYS_FSL_DDR3
 #define CONFIG_SYS_SPD_BUS_NUM         0
 #define SPD_EEPROM_ADDRESS1            0x54 /* I2C access */
 #define SPD_EEPROM_ADDRESS2            0x56 /* I2C access */
@@ -230,9 +218,6 @@ combinations. this should be removed later
  */
 /* NOR Flash on IFC */
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_NO_FLASH
-#endif
 #define CONFIG_SYS_FLASH_BASE          0x88000000
 #define CONFIG_SYS_MAX_FLASH_SECT      1024    /* Max number of sector: 32M */
 
@@ -382,7 +367,6 @@ combinations. this should be removed later
 #define CONFIG_SYS_CS1_FTIM3           CONFIG_SYS_NAND_FTIM3
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_F      /* Call board_pre_init */
 #define CONFIG_BOARD_EARLY_INIT_R
 
 #define CONFIG_SYS_INIT_RAM_LOCK
@@ -487,11 +471,8 @@ combinations. this should be removed later
 
 #endif /* CONFIG_TSEC_ENET */
 
-#define CONFIG_MMC
 #ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
 #define CONFIG_FSL_ESDHC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
@@ -546,10 +527,6 @@ combinations. this should be removed later
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
 
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
@@ -589,7 +566,7 @@ combinations. this should be removed later
 /*
  * Dynamic MTD Partition support with mtdparts
  */
-#ifndef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_CMD_MTDPARTS
@@ -613,8 +590,6 @@ combinations. this should be removed later
 #define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       "u-boot.bin"
 
-#define CONFIG_BAUDRATE                115200
-
 #ifdef CONFIG_SDCARD
 #define CONFIG_DEF_HWCONFIG    "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 #else