x86: Support QEMU x86 targets

[J-u-boot.git] / configs / MSI_Primo81_defconfig

diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
index 6657ad66c9727ac4ceb2bb5bad3a6f16d09f1b2f..ab04519e74ec9771229b3fc12c6cc7a00125b860 100644 (file)
--- a/configs/MSI_Primo81_defconfig
+++ b/configs/MSI_Primo81_defconfig
@@ -1,30 +1,21 @@
-# The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND,
-# 1024x768 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
-# rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer
-# and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
-# (both volume buttons are also connected to the UBOOT_SEL pin). The
-# external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
-# OTG and 3.5mm headphone jack. More details are available at
-#     http://linux-sunxi.org/MSI_Primo81
-
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS=""
-CONFIG_FDTFILE="sun6i-a31s-primo81.dtb"
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN6I=y
+CONFIG_DRAM_CLK=360
+CONFIG_DRAM_ZQ=122
 CONFIG_VIDEO_LCD_MODE="x:768,y:1024,depth:18,pclk_khz:66000,le:56,ri:60,up:30,lo:36,hs:64,vs:50,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_BL_EN="PA25"
+CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
+# CONFIG_USB_KEYBOARD is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81"
+CONFIG_SPL=y
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
 CONFIG_VIDEO_LCD_SPI_CS="PH9"
 CONFIG_VIDEO_LCD_SPI_SCLK="PH10"
 CONFIG_VIDEO_LCD_SPI_MOSI="PH11"
 CONFIG_VIDEO_LCD_SPI_MISO="PH12"
-CONFIG_VIDEO_LCD_BL_EN="PA25"
-CONFIG_VIDEO_LCD_BL_PWM="PH13"
-CONFIG_USB_KEYBOARD=n
-+S:CONFIG_ARM=y
-+S:CONFIG_ARCH_SUNXI=y
-+S:CONFIG_MACH_SUN6I=y
-+S:CONFIG_DRAM_CLK=360
-+S:CONFIG_DRAM_ZQ=122
-# Wifi power
-+S:CONFIG_AXP221_DLDO1_VOLT=3300