]> Git Repo - J-u-boot.git/blobdiff - configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
configs: ls1012a/ls1046a: Add CONFIG_ENV_OVERWRITE in defconfig
[J-u-boot.git] / configs / ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 0eaa7197153f1bcb5a9f4aacb03aecf2bee2b557..525caa6881f4088b1f75bbdc7630467f4e51ac23 100644 (file)
@@ -3,15 +3,17 @@ CONFIG_TARGET_LS1046ARDB=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NXP_ESBC=y
+CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x2000
+CONFIG_NXP_ESBC=y
+CONFIG_DM_GPIO=y
+CONFIG_SPL_TEXT_BASE=0x10000000
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=2
 CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0x10000000
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
@@ -30,6 +32,7 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -41,10 +44,11 @@ CONFIG_MP=y
 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
+CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
+CONFIG_DM_I2C=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
@@ -53,12 +57,15 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_PCIE_LAYERSCAPE_EP=y
 CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
@@ -71,5 +78,3 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
-CONFIG_DM_I2C=y
-CONFIG_DM_GPIO=y
This page took 0.029912 seconds and 4 git commands to generate.