vexpress64: fvp: Fix automatic boot

[J-u-boot.git] / configs / ls1046aqds_tfa_SECURE_BOOT_defconfig

diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
index a73ced200c497bae4bc045faa132065c4313c112..740838baa1028ebefa2baf7b06a827ecda8acc09 100644 (file)
--- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
@@ -15,12 +15,19 @@ CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
 CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_VID=y
+CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv"
+CONFIG_VOL_MONITOR_INA220=y
+CONFIG_VOL_MONITOR_IR36021_SET=y
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_REMAKE_ELF=y
+CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
+CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
@@ -40,15 +47,16 @@ CONFIG_CMD_NAND=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
-CONFIG_MP=y
 CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_EARLY_INIT=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
@@ -59,6 +67,7 @@ CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_MAX_FLASH_BANKS=2
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
@@ -74,7 +83,7 @@ CONFIG_PHY_VITESSE=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_SYS_FMAN_FW_ADDR=0x900000
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y