Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE

[J-u-boot.git] / include / configs / omap3_beagle.h

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index a8abb0e140caa896686ef63916d3daeb740438cb..bbb1073a76c5a7013bb1cb7f64b6ecfc83bca67a 100644 (file)
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -31,12 +31,14 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8     1       /* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7           1       /* This is an ARM V7 CPU core */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
 #define CONFIG_OMAP3430                1       /* which is in a 3430 */
 #define CONFIG_OMAP3_BEAGLE    1       /* working with BEAGLE */
 
+#define CONFIG_SDRC    /* The chip has SDRC controller */
+
 #include <asm/arch/cpu.h>              /* get chip and board defs */
 #include <asm/arch/omap3.h>
 
@@ -93,8 +95,9 @@
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
+#define CONFIG_GENERIC_MMC             1
 #define CONFIG_MMC                     1
-#define CONFIG_OMAP3_MMC               1
+#define CONFIG_OMAP_HSMMC              1
 #define CONFIG_DOS_PARTITION           1
 
 /* DDR - I use Micron DDR */
@@ -109,15 +112,11 @@
 #define CONFIG_USB_DEVICE              1
 #define CONFIG_USB_TTY                 1
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID           0x0451
-#define CONFIG_USBD_PRODUCTID          0x5678
-#define CONFIG_USBD_MANUFACTURER       "Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME       "Beagle"
 
 /* commands to include */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
 #define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
@@ -156,6 +155,7 @@
 /*
  * Board NAND Info.
  */
+#define CONFIG_SYS_NAND_QUIET_TEST     1
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
                                                        /* to access nand */
@@ -181,14 +181,17 @@
        "loadaddr=0x82000000\0" \
        "usbtty=cdc_acm\0" \
        "console=ttyS2,115200n8\0" \
+       "mpurate=500\0" \
        "vram=12M\0" \
        "dvimode=1024x768MR-16@60\0" \
        "defaultdisplay=dvi\0" \
+       "mmcdev=0\0" \
        "mmcroot=/dev/mmcblk0p2 rw\0" \
        "mmcrootfstype=ext3 rootwait\0" \
        "nandroot=/dev/mtdblock4 rw\0" \
        "nandrootfstype=jffs2\0" \
        "mmcargs=setenv bootargs console=${console} " \
+               "mpurate=${mpurate} " \
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
                "omapfb.debug=y " \
@@ -196,16 +199,17 @@
                "root=${mmcroot} " \
                "rootfstype=${mmcrootfstype}\0" \
        "nandargs=setenv bootargs console=${console} " \
+               "mpurate=${mpurate} " \
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
                "omapfb.debug=y " \
                "omapdss.def_disp=${defaultdisplay} " \
                "root=${nandroot} " \
                "rootfstype=${nandrootfstype}\0" \
-       "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+       "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
                "source ${loadaddr}\0" \
-       "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+       "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs; " \
                "bootm ${loadaddr}\0" \
@@ -215,7 +219,7 @@
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc init; then " \
+       "if mmc rescan ${mmcdev}; then " \
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \
@@ -326,7 +330,6 @@
 #define CONFIG_SYS_JFFS2_NUM_BANKS     1
 
 #ifndef __ASSEMBLY__
-extern struct gpmc *gpmc_cfg;
 extern unsigned int boot_flash_base;
 extern volatile unsigned int boot_flash_env_addr;
 extern unsigned int boot_flash_off;
@@ -334,4 +337,8 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR                (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */