configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / nas220_defconfig

diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig
index 05425289ac24db2fd2a4af15f5be9b1682b30a26..ca70ee9637991aa5f217e6ef20982e762dfd7729 100644 (file)
--- a/configs/nas220_defconfig
+++ b/configs/nas220_defconfig
@@ -10,9 +10,9 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000
 CONFIG_TARGET_NAS220=y
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0xA0000
-CONFIG_DEFAULT_DEVICE_TREE="kirkwood-blackarmor-nas220"
-CONFIG_IDENT_STRING="\nNAS 220"
+CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-blackarmor-nas220"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nNAS 220"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
@@ -23,19 +23,17 @@ CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="nas220> "
 CONFIG_SYS_MAXARGS=32
-# CONFIG_CMD_FLASH is not set
 CONFIG_CMD_IDE=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
 CONFIG_SYS_DISABLE_AUTOLOAD=y
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xa0000@0x0(uboot),0x010000@0xa0000(env),0x500000@0xc0000(uimage),0x1a40000@0x5c0000(rootfs)"
@@ -67,5 +65,3 @@ CONFIG_SYS_NS16550_REG_SIZE=-4
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_NAND=y