#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2005
#
# See file CREDITS for list of people who contributed to this
-e s/powerpc/ppc/ \
-e s/macppc/ppc/)
-HOSTOS := $(shell uname -s | tr A-Z a-z | \
+HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
-export HOSTARCH
+export HOSTARCH HOSTOS
# Deal with colliding definitions from tcsh etc.
VENDOR=
ifeq (include/config.mk,$(wildcard include/config.mk))
# load ARCH, BOARD, and CPU configuration
include include/config.mk
-export ARCH CPU BOARD VENDOR
+export ARCH CPU BOARD VENDOR SOC
# load other configuration
include $(TOPDIR)/config.mk
CROSS_COMPILE =
else
ifeq ($(ARCH),ppc)
-CROSS_COMPILE = ppc_8xx-
+CROSS_COMPILE = powerpc-linux-
endif
ifeq ($(ARCH),arm)
CROSS_COMPILE = arm-linux-
ifeq ($(ARCH),nios)
CROSS_COMPILE = nios-elf-
endif
+ifeq ($(ARCH),nios2)
+CROSS_COMPILE = nios2-elf-
+endif
ifeq ($(ARCH),m68k)
CROSS_COMPILE = m68k-elf-
endif
ifeq ($(CPU),ppc4xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
+ifeq ($(CPU),mpc83xx)
+OBJS += cpu/$(CPU)/resetvec.o
+endif
ifeq ($(CPU),mpc85xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
LIBS = lib_generic/libgeneric.a
LIBS += board/$(BOARDDIR)/lib$(BOARD).a
LIBS += cpu/$(CPU)/lib$(CPU).a
+ifdef SOC
+LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
+endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
- fs/reiserfs/libreiserfs.a
+ fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += rtc/librtc.a
.PHONY : $(LIBS)
# Add GCC lib
-PLATFORM_LIBS += --no-warn-mismatch -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
+PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
# The "tools" are needed early, so put this first
all: $(ALL)
+u-boot.hex: u-boot
+ $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
+
u-boot.srec: u-boot
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
u-boot: depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
$(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
- --start-group $(LIBS) $(PLATFORM_LIBS) --end-group \
+ --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
$(LIBS):
etags:
etags -a `find $(SUBDIRS) include \
+ lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
+ fs/cramfs fs/fat fs/fdos fs/jffs2 \
+ net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
System.map: u-boot
## MPC5xx Systems
#########################################################################
+canmb_config: unconfig
+ @./mkconfig -a canmb ppc mpc5xxx canmb
+
cmi_mpc5xx_config: unconfig
@./mkconfig $(@:_config=) ppc mpc5xx cmi
#########################################################################
## MPC5xxx Systems
#########################################################################
+
+aev_config: unconfig
+ @./mkconfig -a aev ppc mpc5xxx tqm5200
+
+cpci5200_config: unconfig
+ @./mkconfig -a cpci5200 ppc mpc5xxx cpci5200 esd
+
+hmi1001_config: unconfig
+ @./mkconfig hmi1001 ppc mpc5xxx hmi1001
+
Lite5200_config \
Lite5200_LOWBOOT_config \
Lite5200_LOWBOOT08_config \
}
@./mkconfig -a IceCube ppc mpc5xxx icecube
+inka4x0_config: unconfig
+ @./mkconfig inka4x0 ppc mpc5xxx inka4x0
+
+o2dnt_config:
+ @./mkconfig -a o2dnt ppc mpc5xxx o2dnt
+
+pf5200_config: unconfig
+ @./mkconfig -a pf5200 ppc mpc5xxx pf5200 esd
+
+PM520_config \
+PM520_DDR_config \
+PM520_ROMBOOT_config \
+PM520_ROMBOOT_DDR_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring DDR,$@)" ] || \
+ { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \
+ echo "... DDR memory revision" ; \
+ }
+ @[ -z "$(findstring ROMBOOT,$@)" ] || \
+ { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
+ echo "... booting from 8-bit flash" ; \
+ }
+ @./mkconfig -a PM520 ppc mpc5xxx pm520
+
MINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig
@ echo "#define CONFIG_$(@:_config=) 1" >include/config.h
@./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk
-PM520_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc5xxx pm520
+Total5100_config \
+Total5200_config \
+Total5200_lowboot_config \
+Total5200_Rev2_config \
+Total5200_Rev2_lowboot_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring 5100,$@)" ] || \
+ { echo "#define CONFIG_MGT5100" >>include/config.h ; \
+ echo "... with MGT5100 processor" ; \
+ }
+ @[ -z "$(findstring 5200,$@)" ] || \
+ { echo "#define CONFIG_MPC5200" >>include/config.h ; \
+ echo "... with MPC5200 processor" ; \
+ }
+ @[ -n "$(findstring Rev,$@)" ] || \
+ { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \
+ echo "... revision 1 board" ; \
+ }
+ @[ -z "$(findstring Rev2_,$@)" ] || \
+ { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \
+ echo "... revision 2 board" ; \
+ }
+ @[ -z "$(findstring lowboot_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \
+ echo "... with lowboot configuration" ; \
+ }
+ @./mkconfig -a Total5200 ppc mpc5xxx total5200
+
+TQM5200_auto_config \
+TQM5200_AA_config \
+TQM5200_AB_config \
+TQM5200_AC_config \
+MiniFAP_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring MiniFAP,$@)" ] || \
+ { echo "#define CONFIG_MINIFAP" >>include/config.h ; \
+ echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \
+ echo "... TQM5200_AC on MiniFAP" ; \
+ }
+ @[ -z "$(findstring AA,$@)" ] || \
+ { echo "#define CONFIG_TQM5200_AA" >>include/config.h ; \
+ echo "... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \
+ }
+ @[ -z "$(findstring AB,$@)" ] || \
+ { echo "#define CONFIG_TQM5200_AB" >>include/config.h ; \
+ echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \
+ echo "... with Graphics Controller"; \
+ }
+ @[ -z "$(findstring AC,$@)" ] || \
+ { echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \
+ echo "... with 4 MB Flash, 128 MB SDRAM" ; \
+ echo "... with Graphics Controller"; \
+ }
+ @[ -z "$(findstring auto,$@)" ] || \
+ { echo "#define CONFIG_CS_AUTOCONF" >>include/config.h ; \
+ echo "... with automatic CS configuration" ; \
+ }
+ @./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
+
+spieval_config: unconfig
+ echo "#define CONFIG_CS_AUTOCONF">>include/config.h
+ echo "... with automatic CS configuration"
+ @./mkconfig -a spieval ppc mpc5xxx tqm5200
#########################################################################
## MPC8xx Systems
Adder_config \
Adder87x_config \
-Adder852_config \
+AdderII_config \
: unconfig
- $(if $(findstring 852,$@), \
+ $(if $(findstring AdderII,$@), \
@echo "#define CONFIG_MPC852T" > include/config.h)
@./mkconfig -a Adder ppc mpc8xx adder
-AdderII_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx adderII
-
ADS860_config \
FADS823_config \
FADS850SAR_config \
}
@./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
+NC650_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx nc650
+
NX823_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx nx823
QS860T_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc
+quantum_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx quantum
+
R360MPI_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx r360mpi
SPD823TS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx spd8xx
+stxxtc_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx stxxtc
+
svm_sc8xx_config: unconfig
@ >include/config.h
@./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
@./mkconfig -a TQM823L ppc mpc8xx tqm8xx
+uc100_config : unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx uc100
+
v37_config: unconfig
@echo "#define CONFIG_LCD" >include/config.h
@echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h
#########################################################################
## PPC4xx Systems
#########################################################################
-xtract_4xx = $(subst _MODEL_BA,,$(subst _MODEL_ME,,$(subst _MODEL_HI,,$(subst _config,,$1))))
+xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
ADCIOP_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx adciop esd
+APC405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx apc405 esd
+
AR405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ar405 esd
ASH405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
-BUBINGA405EP_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
+bamboo_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
+
+bubinga_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc
CANBT_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
-CATcenter_config: unconfig
+CATcenter_config \
+CATcenter_25_config \
+CATcenter_33_config: unconfig
@ echo "/* CATcenter uses PPChameleon Model ME */" > include/config.h
@ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h
+ @[ -z "$(findstring _25,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
+ echo "SysClk = 25MHz" ; \
+ }
+ @[ -z "$(findstring _33,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
+ echo "SysClk = 33MHz" ; \
+ }
@./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+CPCI2DP_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx cpci2dp esd
+
CPCI405_config \
CPCI4052_config \
+CPCI405DT_config \
CPCI405AB_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd
@echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk
DU405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx du405 esd
-EBONY_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ebony
+ebony_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx ebony amcc
ERIC_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx eric
EXBITGEN_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx exbitgen
+G2000_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx g2000
+
+HH405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx hh405 esd
+
HUB405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx hub405 esd
JSE_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx jse
+KAREF_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx karef sandburst
+
+METROBOX_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst
+
MIP405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl
ml300_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
-OCOTEA_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ocotea
+ocotea_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc
OCRTC_config \
ORSG_config: unconfig
PMC405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd
-PPChameleonEVB_MODEL_BA_config \
-PPChameleonEVB_MODEL_ME_config \
-PPChameleonEVB_MODEL_HI_config \
-PPChameleonEVB_config: unconfig
+PPChameleonEVB_config \
+PPChameleonEVB_BA_25_config \
+PPChameleonEVB_ME_25_config \
+PPChameleonEVB_HI_25_config \
+PPChameleonEVB_BA_33_config \
+PPChameleonEVB_ME_33_config \
+PPChameleonEVB_HI_33_config: unconfig
@ >include/config.h
- @[ -z "$(findstring _MODEL_BA,$@)" ] || \
+ @[ -z "$(findstring EVB_BA,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \
echo "... BASIC model" ; \
}
- @[ -z "$(findstring _MODEL_ME,$@)" ] || \
+ @[ -z "$(findstring EVB_ME,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \
echo "... MEDIUM model" ; \
}
- @[ -z "$(findstring _MODEL_HI,$@)" ] || \
+ @[ -z "$(findstring EVB_HI,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \
echo "... HIGH-END model" ; \
}
+ @[ -z "$(findstring _25,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
+ echo "SysClk = 25MHz" ; \
+ }
+ @[ -z "$(findstring _33,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
+ echo "SysClk = 33MHz" ; \
+ }
@./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+sbc405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx sbc405
+
+sycamore_config: unconfig
+ @echo "Configuring for sycamore board as subset of walnut..."
+ @./mkconfig -a walnut ppc ppc4xx walnut amcc
+
VOH405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
+VOM405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx vom405 esd
+
W7OLMC_config \
W7OLMG_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx w7o
-WALNUT405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx walnut405
+walnut_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx walnut amcc
+
+WUH405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
XPEDITE1K_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
+yosemite_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
+
+yellowstone_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+
+#########################################################################
+## MPC8220 Systems
+#########################################################################
+
+Alaska8220_config \
+Yukon8220_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8220 alaska
+
+sorcery_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8220 sorcery
+
#########################################################################
## MPC824x Systems
#########################################################################
A3000_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x a3000
+barco_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x barco
+
BMW_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x bmw
eXalion_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x eXalion
+HIDDEN_DRAGON_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x hidden_dragon
+
MOUSSE_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x mousse
Sandpoint8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x sandpoint
+sbc8240_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x sbc8240
+
SL8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x sl8245
utx8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x utx8245
+cobra5272_config : unconfig
+ @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
+
#########################################################################
## MPC8260 Systems
#########################################################################
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
+CPU87_config \
+CPU87_ROMBOOT_config: unconfig
+ @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87
+ @cd ./include ; \
+ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
+ echo "... booting from 8-bit flash" ; \
+ else \
+ echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
+ echo "... booting from 64-bit flash" ; \
+ fi; \
+ echo "export CONFIG_BOOT_ROM" >> config.mk;
+
+ep8248_config \
+ep8248E_config : unconfig
+ @./mkconfig ep8248 ppc mpc8260 ep8248
+
ep8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 ep8260
hymod_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 hymod
+IDS8247_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8260 ids8247
+
IPHASE4539_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 iphase4539
@./mkconfig -a ISPAN ppc mpc8260 ispan
MPC8260ADS_config \
+MPC8260ADS_lowboot_config \
MPC8260ADS_33MHz_config \
+MPC8260ADS_33MHz_lowboot_config \
MPC8260ADS_40MHz_config \
+MPC8260ADS_40MHz_lowboot_config \
MPC8272ADS_config \
+MPC8272ADS_lowboot_config \
PQ2FADS_config \
+PQ2FADS_lowboot_config \
PQ2FADS-VR_config \
+PQ2FADS-VR_lowboot_config \
PQ2FADS-ZU_config \
+PQ2FADS-ZU_lowboot_config \
PQ2FADS-ZU_66MHz_config \
+PQ2FADS-ZU_66MHz_lowboot_config \
: unconfig
$(if $(findstring PQ2FADS,$@), \
@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \
@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \
$(if $(findstring VR,$@), \
@echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h))
+ @[ -z "$(findstring lowboot_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \
+ echo "... with lowboot configuration" ; \
+ }
@./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads
MPC8266ADS_config: unconfig
ppmc8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 ppmc8260
+Rattler8248_config \
+Rattler_config: unconfig
+ $(if $(findstring 8248,$@), \
+ @echo "#define CONFIG_MPC8248" > include/config.h)
+ @./mkconfig -a Rattler ppc mpc8260 rattler
+
RPXsuper_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 rpxsuper
fi
@./mkconfig -a TQM8260 ppc mpc8260 tqm8260
+VoVPN-GW_66MHz_config \
+VoVPN-GW_100MHz_config: unconfig
+ @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h
+ @./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
+
ZPC1900_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 zpc1900
M5282EVB_config : unconfig
@./mkconfig $(@:_config=) m68k mcf52x2 m5282evb
+TASREG_config : unconfig
+ @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
+
+#########################################################################
+## MPC83xx Systems
+#########################################################################
+
+MPC8349ADS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads
+
#########################################################################
## MPC85xx Systems
#########################################################################
-MPC8540ADS_config: unconfig
+MPC8540ADS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
-MPC8560ADS_config: unconfig
+MPC8540EVAL_config \
+MPC8540EVAL_33_config \
+MPC8540EVAL_66_config \
+MPC8540EVAL_33_slave_config \
+MPC8540EVAL_66_slave_config: unconfig
+ @echo "" >include/config.h ; \
+ if [ "$(findstring _33_,$@)" ] ; then \
+ echo -n "... 33 MHz PCI" ; \
+ else \
+ echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \
+ echo -n "... 66 MHz PCI" ; \
+ fi ; \
+ if [ "$(findstring _slave_,$@)" ] ; then \
+ echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \
+ echo " slave" ; \
+ else \
+ echo " host" ; \
+ fi
+ @./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval
+
+MPC8560ADS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
-stxgp3_config: unconfig
+MPC8541CDS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds
+
+MPC8548CDS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds
+
+MPC8555CDS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds
+
+PM854_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx pm854
+
+PM856_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx pm856
+
+sbc8540_config \
+sbc8540_33_config \
+sbc8540_66_config: unconfig
+ @if [ "$(findstring _66_,$@)" ] ; then \
+ echo "#define CONFIG_PCI_66" >>include/config.h ; \
+ echo "... 66 MHz PCI" ; \
+ else \
+ >include/config.h ; \
+ echo "... 33 MHz PCI" ; \
+ fi
+ @./mkconfig -a SBC8540 ppc mpc85xx sbc8560
+
+sbc8560_config \
+sbc8560_33_config \
+sbc8560_66_config: unconfig
+ @if [ "$(findstring _66_,$@)" ] ; then \
+ echo "#define CONFIG_PCI_66" >>include/config.h ; \
+ echo "... 66 MHz PCI" ; \
+ else \
+ >include/config.h ; \
+ echo "... 33 MHz PCI" ; \
+ fi
+ @./mkconfig -a sbc8560 ppc mpc85xx sbc8560
+
+stxgp3_config: unconfig
@./mkconfig $(@:_config=) ppc mpc85xx stxgp3
+TQM8540_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx tqm8540
+
+TQM8560_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx tqm8560
+
#########################################################################
## 74xx/7xx Systems
#########################################################################
BAB7xx_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
+CPCI750_config: unconfig
+ @./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd
+
DB64360_config: unconfig
@./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell
xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
-integratorcp_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs integratorcp
-
-integratorap_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs integratorap
+at91rm9200dk_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200
+
+cmc_pu2_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
+
+########################################################################
+## ARM Integrator boards
+## There are two variants /AP && /CP
+## - many different core modules (CMs) can be used
+## - some share characteristics
+## Those without specific cpu support can still use U-Boot
+## provided the ARM boot monitor (or similar) runs before U-Boot
+## to set up the platform e.g. map writeable memory to 0x00000000
+## setup MMU, setup caches etc.
+## Ported cores are:-
+## ARM926EJ-S
+## ARM946E-S
+##
+########################################################################
+xtract_int_board = $(subst _$(subst integrator$1_,,$(subst _config,,$2)),,$(subst _config,,$2))
+xtract_int_cm = $(subst integrator$1_,,$(subst _config,,$2))
+#########################################################################
+## Integrator/AP
+#########################################################################
+integratorap_config : unconfig
+ @echo -n "/* Integrator configuration implied " > tmp.fil; \
+ echo " by Makefile target */" >> tmp.fil; \
+ echo >> tmp.fil
+ @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
+ echo " /* Integrator board */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \
+ echo " 1 /* Integrator/AP */" >> tmp.fil; \
+ echo "/* Core module not defined */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \
+ echo -n " /* Integrator core module " >> tmp.fil; \
+ echo "with unknown core */" >> tmp.fil; \
+ cpu=arm_intcm; \
+ mv tmp.fil ./include/config.h; \
+ ubootlds=board/integratorap/u-boot.lds; \
+ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
+ $$ubootlds > $$ubootlds.tmp; \
+ mv -f $$ubootlds.tmp $$ubootlds; \
+ ./mkconfig -a integratorap arm arm_intcm integratorap;
+
+integratorap_CM720T_config integratorap_CM7TDMI_config \
+integratorap_CM920T_config integratorap_CM920T_ETM_config \
+integratorap_CM922T_XA10_config integratorap_CM926EJ_S_config \
+integratorap_CM940T_config integratorap_CM946E_S_config \
+integratorap_CM966E_S_config integratorap_CM10200E_config \
+integratorap_CM10220E_config integratorap_CM1026EJ_S_config \
+integratorap_CM1136JF_S_config : unconfig
+ @echo -n "/* Integrator configuration implied " > tmp.fil; \
+ echo " by Makefile target */" >> tmp.fil; \
+ echo >> tmp.fil
+ @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
+ echo " /* Integrator board */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \
+ echo " 1 /* Integrator/AP */" >> tmp.fil; \
+ cm=$(call xtract_int_cm,ap,$@); \
+ echo -n "#define CONFIG_$$cm " >> tmp.fil; \
+ echo " /* core module */" >> tmp.fil; \
+ case $$cm in \
+ CM920T) \
+ echo -n "#define CONFIG_ARM920" >> tmp.fil; \
+ echo -n "T 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM920T" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm920t;; \
+ CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \
+ echo -n "EJ_S 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM926EJ-S" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm926ejs;; \
+ CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \
+ echo -n "E_S 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM946E-S" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm946es;; \
+ *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \
+ echo -n "TCM 1 /* Int" >> tmp.fil; \
+ echo -n "egrator core module w" >> tmp.fil; \
+ echo -n "ith unported core" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm_intcm;; \
+ esac; \
+ mv tmp.fil ./include/config.h; \
+ ubootlds=board/$(call xtract_int_board,ap,$@)/u-boot.lds; \
+ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
+ $$ubootlds > $$ubootlds.tmp; \
+ mv -f $$ubootlds.tmp $$ubootlds; \
+ ./mkconfig -a $(call xtract_int_board,ap,$@) arm $$cpu \
+ $(call xtract_int_board,ap,$@);
-lpd7a400_config: unconfig
+#########################################################################
+## Integrator/CP
+#########################################################################
+integratorcp_config : unconfig
+ @echo -n "/* Integrator configuration implied " > tmp.fil; \
+ echo " by Makefile target */" >> tmp.fil; \
+ echo >> tmp.fil
+ @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
+ echo " /* Integrator board */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \
+ echo " 1 /* Integrator/CP */" >> tmp.fil; \
+ echo "/* Core module not defined */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \
+ echo -n " /* Integrator core module " >> tmp.fil; \
+ echo "with unknown core */" >> tmp.fil; \
+ cpu=arm_intcm; \
+ echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil; \
+ echo -n " /* CM may not have " >> tmp.fil; \
+ echo "multiple SSRAM mapping */" >> tmp.fil; \
+ echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil; \
+ echo -n " /* CM may not support SPD " >> tmp.fil; \
+ echo "query */" >> tmp.fil; \
+ echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil; \
+ echo -n " /* CM may not support " >> tmp.fil; \
+ echo "remapping */" >> tmp.fil; \
+ echo -n "#undef CONFIG_CM_INIT " >> tmp.fil; \
+ echo -n " /* CM may not have " >> tmp.fil; \
+ echo "initialization reg */" >> tmp.fil; \
+ echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil; \
+ echo -n " /* CM may not have TCRAM */" >> tmp.fil; \
+ mv tmp.fil ./include/config.h; \
+ ubootlds=board/integratorcp/u-boot.lds; \
+ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
+ $$ubootlds > $$ubootlds.tmp; \
+ mv -f $$ubootlds.tmp $$ubootlds; \
+ ./mkconfig -a integratorcp arm arm_intcm integratorcp;
+
+integratorcp_CM920T_config integratorcp_CM920T_ETM_config \
+integratorcp_CM922T_XA10_config integratorcp_CM926EJ_S_config \
+integratorcp_CM940T_config integratorcp_CM946E_S_config \
+integratorcp_CM966E_S_config integratorcp_CM10200E_config \
+integratorcp_CM10220E_config integratorcp_CM1026EJ_S_config \
+integratorcp_CM1136JF_S_config : unconfig
+ @echo -n "/* Integrator configuration implied " > tmp.fil; \
+ echo " by Makefile target */" >> tmp.fil; \
+ echo >> tmp.fil
+ @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
+ echo " /* Integrator board */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \
+ echo " 1 /* Integrator/CP */" >> tmp.fil; \
+ cm=$(call xtract_int_cm,cp,$@); \
+ echo -n "#define CONFIG_$$cm " >> tmp.fil; \
+ echo " /* core module */" >> tmp.fil; \
+ echo "/* $$cm core module */" >> tmp.fil; \
+ case $$cm in \
+ CM920T) echo -n "#define CONFIG_ARM920" >> tmp.fil; \
+ echo -n "T 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM920T" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm920t;; \
+ CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \
+ echo -n "E_S 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM946E-S" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm946es;; \
+ CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \
+ echo -n "EJ_S 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM926EJ-S" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm926ejs;; \
+ *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \
+ echo -n "TCM 1 /* Int" >> tmp.fil; \
+ echo -n "egrator core module w" >> tmp.fil; \
+ echo -n "ith unported core" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm_intcm;; \
+ esac; \
+ mv tmp.fil ./include/config.h; \
+ ubootlds=board/$(call xtract_int_board,cp,$@)/u-boot.lds; \
+ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
+ $$ubootlds > $$ubootlds.tmp; \
+ mv -f $$ubootlds.tmp $$ubootlds; \
+ ./mkconfig -a $(call xtract_int_board,cp,$@) arm $$cpu \
+ $(call xtract_int_board,cp,$@);
+
+lpd7a400_config \
+lpd7a404_config: unconfig
@./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
+mx1ads_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx
+
+mx1fs2_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx
+
omap1510inn_config : unconfig
@./mkconfig $(@:_config=) arm arm925t omap1510inn
fi;
@./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2
+scb9328_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
+
smdk2400_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t smdk2400
+ @./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
smdk2410_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t smdk2410
+ @./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
SX1_config : unconfig
@./mkconfig $(@:_config=) arm arm925t sx1
-mx1ads_config : unconfig
- @./mkconfig $(@:_config=) arm mc9328 mx1ads
-
# TRAB default configuration: 8 MB Flash, 32 MB RAM
trab_config \
trab_bigram_config \
echo "... with 8 MB Flash, 16 MB RAM" ; \
echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
}
- @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab
+ @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
VCMA9_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t vcma9 mpl
+ @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0
versatile_config : unconfig
@./mkconfig $(@:_config=) arm arm926ejs versatile
+voiceblue_smallflash_config \
+voiceblue_config: unconfig
+ @if [ "$(findstring _smallflash_,$@)" ] ; then \
+ echo "... boot from lower flash bank" ; \
+ echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \
+ echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \
+ else \
+ echo "... boot from upper flash bank" ; \
+ >include/config.h ; \
+ echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \
+ fi
+ @./mkconfig -a voiceblue arm arm925t voiceblue
+
+cm4008_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695
+
+cm41xx_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695
+
#########################################################################
## S3C44B0 Systems
#########################################################################
B2_config : unconfig
@./mkconfig $(@:_config=) arm s3c44b0 B2 dave
-#########################################################################
-## MC9328 (Dragonball) Systems
-#########################################################################
-
-mx1ads_config : unconfig
- @./mkconfig $(@:_config=) arm mc9328 mx1ads
-
#########################################################################
## ARM720T Systems
#########################################################################
modnet50_config : unconfig
@./mkconfig $(@:_config=) arm arm720t modnet50
-#########################################################################
-## AT91RM9200 Systems
-#########################################################################
-
-at91rm9200dk_config : unconfig
- @./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk
+evb4510_config : unconfig
+ @./mkconfig $(@:_config=) arm arm720t evb4510
#########################################################################
## XScale Systems
#########################################################################
+adsvix_config : unconfig
+ @./mkconfig $(@:_config=) arm pxa adsvix
+
+cerf250_config : unconfig
+ @./mkconfig $(@:_config=) arm pxa cerf250
+
cradle_config : unconfig
@./mkconfig $(@:_config=) arm pxa cradle
wepep250_config : unconfig
@./mkconfig $(@:_config=) arm pxa wepep250
+xaeniax_config : unconfig
+ @./mkconfig $(@:_config=) arm pxa xaeniax
+
xm250_config : unconfig
@./mkconfig $(@:_config=) arm pxa xm250
xsengine_config : unconfig
@./mkconfig $(@:_config=) arm pxa xsengine
+#########################################################################
+## ARM1136 Systems
+#########################################################################
+omap2420h4_config : unconfig
+ @./mkconfig $(@:_config=) arm arm1136 omap2420h4
+
#========================================================================
# i386
#========================================================================
@echo "#define CONFIG_DBAU1500 1" >>include/config.h
@./mkconfig -a dbau1x00 mips mips dbau1x00
+dbau1550_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1550 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1550_el_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1550 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+pb1000_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_PB1000 1" >>include/config.h
+ @./mkconfig -a pb1x00 mips mips pb1x00
+
#########################################################################
## MIPS64 5Kc
#########################################################################
}
@./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv
+#########################################################################
+## Nios-II
+#########################################################################
+
+PK1C20_config : unconfig
+ @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent
+
+PCI5441_config : unconfig
+ @./mkconfig PCI5441 nios2 nios2 pci5441 psyent
#========================================================================
# MicroBlaze
| xargs rm -f
rm -f examples/hello_world examples/timer \
examples/eepro100_eeprom examples/sched \
- examples/mem_to_mem_idma2intr examples/82559_eeprom
+ examples/mem_to_mem_idma2intr examples/82559_eeprom \
+ examples/test_burst
rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
- rm -f tools/mpc86x_clk
+ rm -f tools/mpc86x_clk tools/ncb
rm -f tools/easylogo/easylogo tools/bmp_logo
rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
rm -f tools/env/fw_printenv tools/env/fw_setenv
rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
- rm -f board/trab/trab_fkt
+ rm -f board/trab/trab_fkt board/voiceblue/eeprom
clobber: clean
find . -type f \( -name .depend \
| xargs -0 rm -f
rm -f $(OBJS) *.bak tags TAGS
rm -fr *.*~
- rm -f u-boot u-boot.map $(ALL)
+ rm -f u-boot u-boot.map u-boot.hex $(ALL)
rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c
rm -f include/asm/proc include/asm/arch include/asm
projects / J-u-boot.git / blobdiff