Convert CONFIG_ARP_TIMEOUT to Kconfig

[J-u-boot.git] / configs / at91sam9n12ek_nandflash_defconfig

diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig
index 429b14053d718e0013776c1bf06eb1ad2618b293..b5964deb661dd7b5f3233a0cebda8fca4e05354b 100644 (file)
--- a/configs/at91sam9n12ek_nandflash_defconfig
+++ b/configs/at91sam9n12ek_nandflash_defconfig
@@ -1,18 +1,22 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x26f00000
-CONFIG_TARGET_AT91SAM9N12EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_AT91SAM9N12EK=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_nand};nand read 0x21000000 0x180000 0x080000;nand read 0x22000000 0x200000 0x400000;bootm 0x22000000 - 0x21000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
@@ -22,9 +26,9 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
+CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_MTDPARTS=y
@@ -38,12 +42,12 @@ CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
-CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
-# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
+CONFIG_SYS_NAND_PAGE_SIZE=0x800
+CONFIG_SYS_NAND_OOBSIZE=0x40
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
@@ -59,6 +63,4 @@ CONFIG_DM_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
 CONFIG_ATMEL_HLCD=y