usb: CONFIG_USB_FASTBOOT prefix replacement for consistency

[J-u-boot.git] / doc / README.android-fastboot

diff --git a/doc/README.android-fastboot b/doc/README.android-fastboot
index 167760968ff56e5ede39c7395cc4cffbc9f01d7e..ce12bc594fc339c336cf640b450b6d3f0aa50aab 100644 (file)
--- a/doc/README.android-fastboot
+++ b/doc/README.android-fastboot
@@ -6,9 +6,8 @@ Overview
 The protocol that is used over USB is described in
 README.android-fastboot-protocol in same directory.
 
-The current implementation does not yet support the erase command or the
-"oem format" command, and there is minimal support for the flash command;
-it only supports eMMC devices.
+The current implementation is a minimal support of the erase command,the
+"oem format" command and flash command;it only supports eMMC devices.
 
 Client installation
 ===================
@@ -34,7 +33,7 @@ Board specific
 The fastboot gadget relies on the USB download gadget, so the following
 options must be configured:
 
-CONFIG_USBDOWNLOAD_GADGET
+CONFIG_USB_GADGET_DOWNLOAD
 CONFIG_G_DNL_VENDOR_NUM
 CONFIG_G_DNL_PRODUCT_NUM
 CONFIG_G_DNL_MANUFACTURER
@@ -43,13 +42,22 @@ NOTE: The CONFIG_G_DNL_VENDOR_NUM must be one of the numbers supported by
 the fastboot client. The list of vendor IDs supported can be found in the
 fastboot client source code (fastboot.c) mentioned above.
 
-The fastboot function is enabled by defining CONFIG_CMD_FASTBOOT and
-CONFIG_ANDROID_BOOT_IMAGE.
+The fastboot function is enabled by defining CONFIG_USB_FUNCTION_FASTBOOT,
+CONFIG_CMD_FASTBOOT and CONFIG_ANDROID_BOOT_IMAGE.
 
 The fastboot protocol requires a large memory buffer for downloads. This
 buffer should be as large as possible for a platform. The location of the
-buffer and size are set with CONFIG_USB_FASTBOOT_BUF_ADDR and
-CONFIG_USB_FASTBOOT_BUF_SIZE.
+buffer and size are set with CONFIG_FASTBOOT_BUF_ADDR and
+CONFIG_FASTBOOT_BUF_SIZE.
+
+Fastboot partition aliases can also be defined for devices where GPT
+limitations prevent user-friendly partition names such as "boot", "system"
+and "cache".  Or, where the actual partition name doesn't match a standard
+partition name used commonly with fastboot.  Current implentation checks
+aliases when accessing partitions by name (flash_write and erase functions).
+To define a partition alias add an environment variable similar to:
+fastboot_partition_alias_<alias partition name>=<actual partition name>
+Example: fastboot_partition_alias_boot=LNX
 
 In Action
 =========