Add AT32AP CPU and AT32AP7000 SoC support

[J-u-boot.git] / README

diff --git a/README b/README
index e0240238b8703cf1e0ede26ceb9c67d4eb9fbed6..69af79a4576431c39d7560cfc43ba206a7ba3975 100644 (file)
--- a/README
+++ b/README
@@ -132,6 +132,7 @@ Directory Hierarchy:
   - arm925t    Files specific to ARM 925 CPUs
   - arm926ejs  Files specific to ARM 926 CPUs
   - arm1136    Files specific to ARM 1136 CPUs
+  - at32ap     Files specific to Atmel AVR32 AP CPUs
   - i386       Files specific to i386 CPUs
   - ixp                Files specific to Intel XScale IXP CPUs
   - mcf52x2    Files specific to Freescale ColdFire MCF52x2 CPUs
@@ -156,6 +157,7 @@ Directory Hierarchy:
 - examples     Example code for standalone applications, etc.
 - include      Header Files
 - lib_arm      Files generic to ARM     architecture
+- lib_avr32    Files generic to AVR32   architecture
 - lib_generic  Files generic to all     architectures
 - lib_i386     Files generic to i386    architecture
 - lib_m68k     Files generic to m68k    architecture
@@ -256,6 +258,9 @@ The following options need to be configured:
                ----------------------
                CONFIG_NIOS2
 
+               AVR32 based CPUs:
+               ----------------------
+               CONFIG_AT32AP
 
 - Board Type:  Define exactly one of
 
@@ -2323,6 +2328,26 @@ images ready for download to / installation on your system:
 - "u-boot" is an image in ELF binary format
 - "u-boot.srec" is in Motorola S-Record format
 
+By default the build is performed locally and the objects are saved
+in the source directory. One of the two methods can be used to change
+this behavior and build U-Boot to some external directory:
+
+1. Add O= to the make command line invocations:
+
+       make O=/tmp/build distclean
+       make O=/tmp/build NAME_config
+       make O=/tmp/build all
+
+2. Set environment variable BUILD_DIR to point to the desired location:
+
+       export BUILD_DIR=/tmp/build
+       make distclean
+       make NAME_config
+       make all
+
+Note that the command line "O=" setting overrides the BUILD_DIR environment
+variable.
+
 
 Please be aware that the Makefiles assume you are using GNU make, so
 for instance on NetBSD you might need to use "gmake" instead of
@@ -2376,6 +2401,22 @@ or to build on a native PowerPC system you can type
 
        CROSS_COMPILE=' ' MAKEALL
 
+When using the MAKEALL script, the default behaviour is to build U-Boot
+in the source directory. This location can be changed by setting the
+BUILD_DIR environment variable. Also, for each target built, the MAKEALL
+script saves two log files (<target>.ERR and <target>.MAKEALL) in the
+<source dir>/LOG directory. This default location can be changed by
+setting the MAKEALL_LOGDIR environment variable. For example:
+
+       export BUILD_DIR=/tmp/build
+       export MAKEALL_LOGDIR=/tmp/log
+       CROSS_COMPILE=ppc_8xx- MAKEALL
+
+With the above settings build objects are saved in the /tmp/build, log
+files are saved in the /tmp/log and the source tree remains clean during
+the whole build process.
+
+
 See also "U-Boot Porting Guide" below.
 
 
@@ -2686,9 +2727,9 @@ defines the following image properties:
   4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
   LynxOS, pSOS, QNX, RTEMS, ARTOS;
   Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS).
-* Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
+* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
   IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
-  Currently supported: ARM, Intel x86, MIPS, NIOS, PowerPC).
+  Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC).
 * Compression Type (uncompressed, gzip, bzip2)
 * Load Address
 * Entry Point