Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-marvell into...

[J-u-boot.git] / configs / sama5d3_xplained_nandflash_defconfig

diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig
index 83ff270e5cf40df32cdb930873faea21e94a8985..f01245271c587611b10bbf3d572ec06f6e6385c3 100644 (file)
--- a/configs/sama5d3_xplained_nandflash_defconfig
+++ b/configs/sama5d3_xplained_nandflash_defconfig
@@ -1,32 +1,36 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x26f00000
 CONFIG_TARGET_SAMA5D3_XPLAINED=y
-CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
+CONFIG_SPL_TEXT_BASE=0x300000
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
 CONFIG_DEBUG_UART=y
-CONFIG_SPL_TEXT_BASE=0x300000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_FIT=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_DRIVERS=y
+CONFIG_SPL_NAND_BASE=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_FLASH is not set
@@ -38,6 +42,8 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_HASH_VERIFY=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
@@ -45,7 +51,6 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
@@ -59,10 +64,8 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_UTMI=y
 CONFIG_AT91_H32MX=y
 CONFIG_AT91_GPIO=y
-CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
-# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_PMECC_CAP=4
 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
@@ -72,19 +75,16 @@ CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
-CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_W1=y
 CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
 CONFIG_W1_EEPROM_DS24XXX=y
-CONFIG_FAT_WRITE=y
 CONFIG_OF_LIBFDT_OVERLAY=y