acpi: Add an acpi command

[J-u-boot.git] / lib / Kconfig

diff --git a/lib/Kconfig b/lib/Kconfig
index 135f0b372b074270beab7450a542edeeef94124f..868de3bf3b813aff6cf75d95c760986be05d23d1 100644 (file)
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -7,6 +7,16 @@ config BCH
          This is used by SoC platforms which do not have built-in ELM
          hardware engine required for BCH ECC correction.
 
+config BINMAN_FDT
+       bool "Allow access to binman information in the device tree"
+       depends on BINMAN && OF_CONTROL
+       default y
+       help
+         This enables U-Boot to access information about binman entries,
+         stored in the device tree in a binman node. Typical uses are to
+         locate entries in the firmware image. See binman.h for the available
+         functionality.
+
 config CC_OPTIMIZE_LIBS_FOR_SPEED
        bool "Optimize libraries for speed"
        help
@@ -96,7 +106,7 @@ config SYS_HZ
          set to 1000.
 
 config SPL_USE_TINY_PRINTF
-       bool "Enable tiny printf() version"
+       bool "Enable tiny printf() version in SPL"
        depends on SPL
        default y
        help
@@ -108,7 +118,7 @@ config SPL_USE_TINY_PRINTF
          The supported format specifiers are %c, %s, %u/%d and %x.
 
 config TPL_USE_TINY_PRINTF
-       bool "Enable tiny printf() version"
+       bool "Enable tiny printf() version in TPL"
        depends on TPL
        default y if SPL_USE_TINY_PRINTF
        help
@@ -140,7 +150,8 @@ config REGEX
 
 choice
        prompt "Pseudo-random library support type"
-       depends on NET_RANDOM_ETHADDR || RANDOM_UUID || CMD_UUID
+       depends on NET_RANDOM_ETHADDR || RANDOM_UUID || CMD_UUID || \
+                  RNG_SANDBOX || UT_LIB && AES
        default LIB_RAND
        help
          Select the library to provide pseudo-random number generator
@@ -265,6 +276,7 @@ config AES
          present.
 
 source lib/rsa/Kconfig
+source lib/crypto/Kconfig
 
 config TPM
        bool "Trusted Platform Module (TPM) Support"
@@ -397,6 +409,11 @@ config GZIP
        help
          This enables support for GZIP compression algorithm.
 
+config BZIP2
+       bool "Enable bzip2 decompression support"
+       help
+         This enables support for BZIP2 compression algorithm.
+
 config ZLIB
        bool
        default y
@@ -417,6 +434,11 @@ config SPL_LZ4
          fast compression and decompression speed. It belongs to the LZ77
          family of byte-oriented compression schemes.
 
+config SPL_LZMA
+       bool "Enable LZMA decompression support for SPL build"
+       help
+         This enables support for LZMA compression altorithm for SPL boot.
+
 config SPL_LZO
        bool "Enable LZO decompression support in SPL"
        help
@@ -464,6 +486,17 @@ config OF_LIBFDT
          particular compatible nodes. The library operates on a flattened
          version of the device tree.
 
+config OF_LIBFDT_ASSUME_MASK
+       hex "Mask of conditions to assume for libfdt"
+       depends on OF_LIBFDT || FIT
+       default 0
+       help
+         Use this to change the assumptions made by libfdt about the
+         device tree it is working with. A value of 0 means that no assumptions
+         are made, and libfdt is able to deal with malicious data. A value of
+         0xff means all assumptions are made and any invalid data may cause
+         unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
+
 config OF_LIBFDT_OVERLAY
        bool "Enable the FDT library overlay support"
        depends on OF_LIBFDT
@@ -481,6 +514,17 @@ config SPL_OF_LIBFDT
          particular compatible nodes. The library operates on a flattened
          version of the device tree.
 
+config SPL_OF_LIBFDT_ASSUME_MASK
+       hex "Mask of conditions to assume for libfdt"
+       depends on SPL_OF_LIBFDT || FIT
+       default 0xff
+       help
+         Use this to change the assumptions made by libfdt in SPL about the
+         device tree it is working with. A value of 0 means that no assumptions
+         are made, and libfdt is able to deal with malicious data. A value of
+         0xff means all assumptions are made and any invalid data may cause
+         unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
+
 config TPL_OF_LIBFDT
        bool "Enable the FDT library for TPL"
        default y if TPL_OF_CONTROL
@@ -491,6 +535,17 @@ config TPL_OF_LIBFDT
          particular compatible nodes. The library operates on a flattened
          version of the device tree.
 
+config TPL_OF_LIBFDT_ASSUME_MASK
+       hex "Mask of conditions to assume for libfdt"
+       depends on TPL_OF_LIBFDT || FIT
+       default 0xff
+       help
+         Use this to change the assumptions made by libfdt in TPL about the
+         device tree it is working with. A value of 0 means that no assumptions
+         are made, and libfdt is able to deal with malicious data. A value of
+         0xff means all assumptions are made and any invalid data may cause
+         unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
+
 config FDT_FIXUP_PARTITIONS
        bool "overwrite MTD partitions in DTS through defined in 'mtdparts'"
        depends on OF_LIBFDT
@@ -533,6 +588,19 @@ config SMBIOS_PRODUCT_NAME
 
 endmenu
 
+config ASN1_COMPILER
+       bool
+
+config ASN1_DECODER
+       bool
+       help
+         Enable asn1 decoder library.
+
+config OID_REGISTRY
+       bool
+       help
+         Enable fast lookup object identifier registry.
+
 source lib/efi/Kconfig
 source lib/efi_loader/Kconfig
 source lib/optee/Kconfig
@@ -541,4 +609,13 @@ config TEST_FDTDEC
        bool "enable fdtdec test"
        depends on OF_LIBFDT
 
+config LIB_DATE
+       bool
+
+config LIB_ELF
+       bool
+       help
+         Supoort basic elf loading/validating functions.
+         This supports fir 32 bit and 64 bit versions.
+
 endmenu