arm: dts: imx8m*-venice: add gpio hog support

[J-u-boot.git] / configs / poplar_defconfig

diff --git a/configs/poplar_defconfig b/configs/poplar_defconfig
index 4f8cc4c95e5bf713c489b232bcc089add40f134f..5d2639f71bdf181c3c1973d945858b6bc646a003 100644 (file)
--- a/configs/poplar_defconfig
+++ b/configs/poplar_defconfig
@@ -1,21 +1,40 @@
 CONFIG_ARM=y
 CONFIG_TARGET_POPLAR=y
-CONFIG_IDENT_STRING="poplar"
+CONFIG_SYS_TEXT_BASE=0x37000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x1F0000
 CONFIG_DEFAULT_DEVICE_TREE="hi3798cv200-poplar"
+CONFIG_IDENT_STRING="poplar"
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_DISTRO_DEFAULTS=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SYS_PROMPT="poplar# "
-CONFIG_CMD_UNZIP=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 # CONFIG_ISO_PARTITION is not set
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x20000000
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_K3=y
+CONFIG_DM_ETH=y
+CONFIG_HIGMACV300_ETH=y
+CONFIG_RESET_HISILICON=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_STORAGE=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
-CONFIG_LIB_RAND=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="HiSilicon"
+CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd00d
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y