Convert CONFIG_CMD_IRQ to Kconfig

[J-u-boot.git] / include / configs / C29XPCIE.h

diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index 397c950b8c49f6b084d2e6763243cacb4456e229..398d0e0550cbd7a681af355e0ce0c09b1b3292aa 100644 (file)
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -11,12 +11,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
-#ifdef CONFIG_C29XPCIE
-#define CONFIG_PPC_C29X
-#endif
-
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_SYS_TEXT_BASE           0x11000000
@@ -28,13 +22,7 @@
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_NAND_INIT
-#define CONFIG_TPL_SERIAL_SUPPORT
-#define CONFIG_TPL_LIBGENERIC_SUPPORT
-#define CONFIG_TPL_LIBCOMMON_SUPPORT
-#define CONFIG_TPL_I2C_SUPPORT
 #define CONFIG_TPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_TPL_NAND_SUPPORT
-#define CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SPL_MAX_SIZE            (128 << 10)
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
@@ -45,8 +33,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    ((128 + 128) << 10)
 #elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TEXT_BASE           0xff800000
@@ -82,13 +68,8 @@
 #endif
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE                   /* BOOKE */
-#define CONFIG_E500                    /* BOOKE e500 family */
-#define CONFIG_FSL_IFC                 /* Enable IFC Support */
-#define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 #define CONFIG_SYS_HAS_SERDES          /* common SERDES init code */
 
-#define CONFIG_PCI                     /* Enable PCI/PCIE */
 #ifdef CONFIG_PCI
 #define CONFIG_PCIE1                   /* PCIE controller 1 (slot 1) */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
@@ -113,13 +94,9 @@
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 #define CONFIG_SYS_PCIE1_IO_PHYS       0xfffc00000ull
 
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
-
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif
 
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_TSEC_ENET
 #define CONFIG_ENV_OVERWRITE
 
@@ -146,7 +123,6 @@
 #define CONFIG_PANIC_HANG
 
 /* DDR Setup */
-#define CONFIG_SYS_FSL_DDR3
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM         0
 #define SPD_EEPROM_ADDRESS             0x50
@@ -173,10 +149,6 @@
                        (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE)
 #define CONFIG_SYS_PLATFORM_SRAM_SIZE  (512 << 10)
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_NO_FLASH
-#endif
-
 /*
  * IFC Definitions
  */
@@ -382,8 +354,6 @@
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
 #define CONFIG_SYS_BAUDRATE_TABLE      \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
@@ -401,7 +371,6 @@
 
 /* I2C EEPROM */
 /* enable read and write access to EEPROM */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
@@ -467,16 +436,8 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
 
-/* Hash command with SHA acceleration supported in hardware */
-#ifdef CONFIG_FSL_CAAM
-#define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
-#endif
-
 /*
  * Miscellaneous configurable options
  */
@@ -515,9 +476,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-
-#define CONFIG_BAUDRATE                115200
-
 #define CONFIG_DEF_HWCONFIG    fsl_ddr:ecc=on
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \