Finish conversion of CONFIG_SYS_CLK_FREQ to Kconfig

[J-u-boot.git] / include / configs / da850evm.h

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 883cbc95d239a4873d2c7c9e167e1f20b33ebe47..97c9276e0e22357872af2ec4f1da747cafae32d1 100644 (file)
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -18,11 +18,9 @@
  * SoC Configuration
  */
 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
-#define CONFIG_SYS_CLK_FREQ            clk_get(DAVINCI_ARM_CLKID)
 #define CONFIG_SYS_OSCIN_FREQ          24000000
 #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
 #ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_SYS_DV_NOR_BOOT_CFG     (0x11)
@@ -31,7 +29,6 @@
 /*
  * Memory Info
  */
-#define CONFIG_SYS_MALLOC_LEN  (0x10000 + 1*1024*1024) /* malloc() len */
 #define PHYS_SDRAM_1           DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
 #define PHYS_SDRAM_1_SIZE      (64 << 20) /* SDRAM size 64MB */
 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
@@ -123,9 +120,6 @@
 #undef CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1 /* Max number of NAND devices */
 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE      (2 << 10)
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x40000
 #define CONFIG_SYS_NAND_U_BOOT_DST     0xc1080000
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_NAND_U_BOOT_DST
@@ -139,16 +133,8 @@
                                39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
                                49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
                                59, 60, 61, 62, 63 }
-#define CONFIG_SYS_NAND_PAGE_COUNT     64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       10
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SPL_NAND_LOAD
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_NAND_SELF_INIT
-#endif
 #endif
 
 /*
@@ -173,20 +159,12 @@
 #define CONFIG_BOOTFILE                "uImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
 
 /*
  * Linux Information
  */
 #define LINUX_BOOT_PARAM_ADDR  (PHYS_SDRAM_1 + 0x100)
 #define CONFIG_HWCONFIG                /* enable hwconfig */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-
-#define CONFIG_BOOTCOMMAND \
-               "run envboot; " \
-               "run mmcboot; "
 
 #define DEFAULT_LINUX_BOOT_ENV \
        "loadaddr=0xc0700000\0" \