Merge branch 'master' of git://git.denx.de/u-boot-uniphier

[J-u-boot.git] / include / configs / aria.h

diff --git a/include/configs/aria.h b/include/configs/aria.h
index b21b495c7f03dbdfbe652d3d91ed8796ec6b2890..2265f3e7744c2f3efb0bcc4298b0a632cd632bac 100644 (file)
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2009 Wolfgang Denk <[email protected]>
  * (C) Copyright 2009, DAVE Srl <www.dave.eu>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -29,6 +13,9 @@
 #define __CONFIG_H
 
 #define CONFIG_ARIA 1
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_GENERIC_BOARD
+
 /*
  * Memory map for the ARIA board:
  *
@@ -47,7 +34,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300            1       /* E300 Family */
-#define CONFIG_MPC512X         1       /* MPC512X family */
 #define CONFIG_FSL_DIU_FB      1       /* FSL DIU */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFF00000
@@ -64,7 +50,6 @@
 
 #define CONFIG_SYS_MPC512X_CLKIN       33000000        /* in Hz */
 
-#define CONFIG_BOARD_EARLY_INIT_F              /* call board_early_init_f() */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_IMMR                        0x80000000
@@ -266,11 +251,16 @@
 #define CONFIG_SYS_ARIA_SRAM_BASE      (CONFIG_SYS_SRAM_BASE + \
                                         CONFIG_SYS_SRAM_SIZE)
 #define CONFIG_SYS_ARIA_SRAM_SIZE      0x00100000      /* reserve 1MB-window */
+#define CONFIG_SYS_CS6_START           CONFIG_SYS_ARIA_SRAM_BASE
+#define CONFIG_SYS_CS6_SIZE            CONFIG_SYS_ARIA_SRAM_SIZE
 
 #define CONFIG_SYS_ARIA_FPGA_BASE      (CONFIG_SYS_ARIA_SRAM_BASE + \
                                         CONFIG_SYS_ARIA_SRAM_SIZE)
 #define CONFIG_SYS_ARIA_FPGA_SIZE      0x20000         /* 128 KB */
 
+#define CONFIG_SYS_CS2_START           CONFIG_SYS_ARIA_FPGA_BASE
+#define CONFIG_SYS_CS2_SIZE            CONFIG_SYS_ARIA_FPGA_SIZE
+
 #define CONFIG_SYS_CS0_CFG             0x05059150
 #define CONFIG_SYS_CS2_CFG             (       (5 << 24) | \
                                                (5 << 16) | \
@@ -322,6 +312,7 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE             3       /* console on PSC3 */
+#define CONFIG_SYS_PSC3
 #if CONFIG_PSC_CONSOLE != 3
 #error CONFIG_PSC_CONSOLE must be 3
 #endif
@@ -345,6 +336,7 @@
  * PCI
  */
 #ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
 
 #define CONFIG_SYS_PCI_MEM_BASE                0xA0000000
 #define CONFIG_SYS_PCI_MEM_PHYS                CONFIG_SYS_PCI_MEM_BASE
@@ -365,7 +357,6 @@
 
 /* I2C */
 #define CONFIG_HARD_I2C                        /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C                 /* so disable bit-banged I2C */
 #define CONFIG_I2C_MULTI_BUS
 
 /* I2C speed and slave address */
@@ -378,7 +369,7 @@
 /*
  * IIM - IC Identification Module
  */
-#undef CONFIG_IIM
+#undef CONFIG_FSL_IIM
 
 /*
  * EEPROM configuration for Atmel AT24C32A-10TQ-2.7:
@@ -416,8 +407,6 @@
 #define CONFIG_LOADS_ECHO              1
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1
 
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
@@ -426,7 +415,6 @@
 #undef CONFIG_CMD_IDE
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
@@ -480,7 +468,6 @@
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 
 #ifdef CONFIG_CMD_KGDB
 # define CONFIG_SYS_CBSIZE     1024            /* Console I/O Buffer Size */
@@ -496,8 +483,6 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
 
-#define CONFIG_SYS_HZ          1000
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -521,7 +506,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE           230400  /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX          2       /* which serial port to use */
 #endif
 
 /*
@@ -642,4 +626,21 @@
 #define FSL_ATA_CTRL_DMA_WRITE         0x02000000
 #define FSL_ATA_CTRL_IORDY_EN          0x01000000
 
+/* Clocks in use */
+#define SCCR1_CLOCKS_EN        (CLOCK_SCCR1_CFG_EN |                           \
+                        CLOCK_SCCR1_LPC_EN |                           \
+                        CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) |       \
+                        CLOCK_SCCR1_PSCFIFO_EN |                       \
+                        CLOCK_SCCR1_DDR_EN |                           \
+                        CLOCK_SCCR1_FEC_EN |                           \
+                        CLOCK_SCCR1_NFC_EN |                           \
+                        CLOCK_SCCR1_PATA_EN |                          \
+                        CLOCK_SCCR1_PCI_EN |                           \
+                        CLOCK_SCCR1_TPR_EN)
+
+#define SCCR2_CLOCKS_EN        (CLOCK_SCCR2_MEM_EN |           \
+                        CLOCK_SCCR2_SPDIF_EN |         \
+                        CLOCK_SCCR2_DIU_EN |           \
+                        CLOCK_SCCR2_I2C_EN)
+
 #endif /* __CONFIG_H */