#
mainmenu "U-Boot $(UBOOTVERSION) Configuration"
+comment "Compiler: $(CC_VERSION_TEXT)"
+
+source "scripts/Kconfig.include"
+
# Allow defaults in arch-specific code to override any given here
source "arch/Kconfig"
This option is enabled by default for U-Boot.
+config OPTIMIZE_INLINING
+ bool "Allow compiler to uninline functions marked 'inline' in full U-Boot"
+ default n
+ help
+ This option determines if U-Boot forces gcc to inline the functions
+ developers have marked 'inline'. Doing so takes away freedom from gcc to
+ do what it thinks is best, which is desirable in some cases for size
+ reasons.
+
+config SPL_OPTIMIZE_INLINING
+ bool "Allow compiler to uninline functions marked 'inline' in SPL"
+ depends on SPL
+ default n
+ help
+ This option determines if U-Boot forces gcc to inline the functions
+ developers have marked 'inline'. Doing so takes away freedom from gcc to
+ do what it thinks is best, which is desirable in some cases for size
+ reasons.
+
+config TPL_OPTIMIZE_INLINING
+ bool "Allow compiler to uninline functions marked 'inline' in TPL"
+ depends on TPL
+ default n
+ help
+ This option determines if U-Boot forces gcc to inline the functions
+ developers have marked 'inline'. Doing so takes away freedom from gcc to
+ do what it thinks is best, which is desirable in some cases for size
+ reasons.
+
config CC_COVERAGE
bool "Enable code coverage analysis"
depends on SANDBOX
Enabling this option will pass "--coverage" to gcc to compile
and link code instrumented for coverage analysis.
+config CC_HAS_ASM_INLINE
+ def_bool $(success,echo 'void foo(void) { asm inline (""); }' | $(CC) -x c - -c -o /dev/null)
+
+config XEN
+ bool "Select U-Boot be run as a bootloader for XEN Virtual Machine"
+ help
+ Enabling this option will make U-Boot be run as a bootloader
+ for XEN [1] Virtual Machine.
+
+ Xen is a virtual machine monitor (VMM) or a type-1 hypervisor with support
+ for para-virtualization. Xen can organize the safe execution of several
+ virtual machines on the same physical system with performance close to
+ native. It is used as the basis for a number of different commercial and
+ open source applications, such as: server virtualization, Infrastructure
+ as a Service (IaaS), desktop virtualization, security applications,
+ embedded and hardware appliances.
+ Xen has a special VM called Domain-0 that runs the Dom0 kernel and allows
+ Xen to use the device drivers for the Domain-0 kernel by default.
+
+ [1] - https://xenproject.org/
+
config DISTRO_DEFAULTS
bool "Select defaults suitable for booting general purpose Linux distributions"
select AUTO_COMPLETE
config NR_DRAM_BANKS
int "Number of DRAM banks"
- default 1 if ARCH_SUNXI
+ default 1 if ARCH_SUNXI || ARCH_OWL
default 4
help
This defines the number of DRAM banks.
hex "Size of malloc() pool before relocation"
depends on SYS_MALLOC_F
default 0x1000 if AM33XX
- default 0x2800 if SANDBOX
+ default 0x4000 if SANDBOX
default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \
ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \
- ARCH_LS1046A)
+ ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI || ARCH_OWL)
default 0x400
help
Before relocation, memory is very limited on many platforms. Still,
When disabling this, please check if malloc calls, maybe
should be replaced by calloc - if one expects zeroed memory.
+config SYS_MALLOC_DEFAULT_TO_INIT
+ bool "Default malloc to init while reserving the memory for it"
+ default n
+ help
+ It may happen that one needs to move the dynamic allocation
+ from one to another memory range, eg. when moving the malloc
+ from the limited static to a potentially large dynamic (DDR)
+ memory.
+
+ If so then on top of setting the updated memory aside one
+ needs to bring the malloc init.
+
+ If such a scenario is sought choose yes.
+
config TOOLS_DEBUG
bool "Enable debug information for tools"
help
This can be used not only for 64bit SoCs, but also for
large physical address extension on 32bit SoCs.
+config HAS_ROM
+ bool
+ select BINMAN
+ help
+ Enables building of a u-boot.rom target. This collects U-Boot and
+ any necessary binary blobs.
+
+config ROM_NEEDS_BLOBS
+ bool
+ depends on HAS_ROM
+ help
+ Enable this if building the u-boot.rom target needs binary blobs, and
+ so cannot be done normally. In this case, U-Boot will only build the
+ ROM if the required blobs exist. If not, you will see an warning like:
+
+ Image 'main-section' is missing external blobs and is non-functional:
+ intel-descriptor intel-me intel-refcode intel-vga intel-mrc
+
config BUILD_ROM
bool "Build U-Boot as BIOS replacement"
- depends on X86
+ depends on HAS_ROM
+ default y if !ROM_NEEDS_BLOBS
help
This option allows to build a ROM version of U-Boot.
The build process generally requires several binary blobs
which are not shipped in the U-Boot source tree.
- Please, see doc/README.x86 for details.
+ Please, see doc/arch/x86.rst for details.
config SPL_IMAGE
string "SPL image used in the combined SPL+U-Boot image"
default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
default "u-boot-elf.srec" if RCAR_GEN3
- default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
+ default "u-boot.itb" if !BINMAN && SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
- default "u-boot.kwb" if KIRKWOOD
+ default "u-boot.kwb" if ARCH_KIRKWOOD
default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
help
default "__start" if MIPS
default "_start"
-endmenu # General setup
-
-menu "Boot images"
-
-config ANDROID_BOOT_IMAGE
- bool "Enable support for Android Boot Images"
- default y if FASTBOOT
- help
- This enables support for booting images which use the Android
- image format header.
-
-config FIT
- bool "Support Flattened Image Tree"
- select MD5
- select SHA1
- help
- This option allows you to boot the new uImage structure,
- Flattened Image Tree. FIT is formally a FDT, which can include
- images of various types (kernel, FDT blob, ramdisk, etc.)
- in a single blob. To boot this new uImage structure,
- pass the address of the blob to the "bootm" command.
- FIT is very flexible, supporting compression, multiple images,
- multiple configurations, verification through hashing and also
- verified boot (secure boot using RSA).
-
-if FIT
-
-config FIT_EXTERNAL_OFFSET
- hex "FIT external data offset"
- default 0x0
+config STACK_SIZE
+ hex "Define max stack size that can be used by U-Boot"
+ default 0x4000000 if ARCH_VERSAL || ARCH_ZYNQMP
+ default 0x200000 if MICROBLAZE
+ default 0x1000000
help
- This specifies a data offset in fit image.
- The offset is from data payload offset to the beginning of
- fit image header. When specifies a offset, specific data
- could be put in the hole between data payload and fit image
- header, such as CSF data on i.MX platform.
+ Define Max stack size that can be used by U-Boot. This value is used
+ by the UEFI sub-system. On some boards initrd_high is calculated as
+ base stack pointer minus this stack size.
-config FIT_ENABLE_SHA256_SUPPORT
- bool "Support SHA256 checksum of FIT image contents"
- default y
- select SHA256
- help
- Enable this to support SHA256 checksum of FIT image contents. A
- SHA256 checksum is a 256-bit (32-byte) hash value used to check that
- the image contents have not been corrupted. SHA256 is recommended
- for use in secure applications since (as at 2016) there is no known
- feasible attack that could produce a 'collision' with differing
- input data. Use this for the highest security. Note that only the
- SHA256 variant is supported: SHA512 and others are not currently
- supported in U-Boot.
-
-config FIT_SIGNATURE
- bool "Enable signature verification of FIT uImages"
- depends on DM
- select HASH
- select RSA
- select RSA_VERIFY
- select IMAGE_SIGN_INFO
- help
- This option enables signature verification of FIT uImages,
- using a hash signed and verified using RSA. If
- CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
- hashing is available using hardware, then the RSA library will use
- it. See doc/uImage.FIT/signature.txt for more details.
-
- WARNING: When relying on signed FIT images with a required signature
- check the legacy image format is disabled by default, so that
- unsigned images cannot be loaded. If a board needs the legacy image
- format support in this case, enable it using
- CONFIG_LEGACY_IMAGE_FORMAT.
-
-config FIT_SIGNATURE_MAX_SIZE
- hex "Max size of signed FIT structures"
- depends on FIT_SIGNATURE
- default 0x10000000
- help
- This option sets a max size in bytes for verified FIT uImages.
- A sane value of 256MB protects corrupted DTB structures from overlapping
- device memory. Assure this size does not extend past expected storage
- space.
-
-config FIT_ENABLE_RSASSA_PSS_SUPPORT
- bool "Support rsassa-pss signature scheme of FIT image contents"
- depends on FIT_SIGNATURE
+config SYS_HAS_SRAM
+ bool
+ default y if TARGET_PIC32MZDASK
+ default y if TARGET_DEVKIT8000
+ default y if TARGET_TRICORDER
default n
help
- Enable this to support the pss padding algorithm as described
- in the rfc8017 (https://tools.ietf.org/html/rfc8017).
-
-config FIT_CIPHER
- bool "Enable ciphering data in a FIT uImages"
- depends on DM
- select AES
- help
- Enable the feature of data ciphering/unciphering in the tool mkimage
- and in the u-boot support of the FIT image.
-
-config FIT_VERBOSE
- bool "Show verbose messages when FIT images fail"
- help
- Generally a system will have valid FIT images so debug messages
- are a waste of code space. If you are debugging your images then
- you can enable this option to get more verbose information about
- failures.
-
-config FIT_BEST_MATCH
- bool "Select the best match for the kernel device tree"
- help
- When no configuration is explicitly selected, default to the
- one whose fdt's compatibility field best matches that of
- U-Boot itself. A match is considered "best" if it matches the
- most specific compatibility entry of U-Boot's fdt's root node.
- The order of entries in the configuration's fdt is ignored.
+ Enable this to allow support for the on board SRAM.
+ SRAM base address is controlled by CONFIG_SYS_SRAM_BASE.
+ SRAM size is controlled by CONFIG_SYS_SRAM_SIZE.
-config FIT_IMAGE_POST_PROCESS
- bool "Enable post-processing of FIT artifacts after loading by U-Boot"
- depends on TI_SECURE_DEVICE
- help
- Allows doing any sort of manipulation to blobs after they got extracted
- from FIT images like stripping off headers or modifying the size of the
- blob, verification, authentication, decryption etc. in a platform or
- board specific way. In order to use this feature a platform or board-
- specific implementation of board_fit_image_post_process() must be
- provided. Also, anything done during this post-processing step would
- need to be comprehended in how the images were prepared before being
- injected into the FIT creation (i.e. the blobs would have been pre-
- processed before being added to the FIT image).
-
-if SPL
-
-config SPL_FIT
- bool "Support Flattened Image Tree within SPL"
- depends on SPL
- select SPL_OF_LIBFDT
-
-config SPL_FIT_PRINT
- bool "Support FIT printing within SPL"
- depends on SPL_FIT
- help
- Support printing the content of the fitImage in a verbose manner in SPL.
-
-config SPL_FIT_SIGNATURE
- bool "Enable signature verification of FIT firmware within SPL"
- depends on SPL_DM
- select SPL_FIT
- select SPL_RSA
- select SPL_RSA_VERIFY
- select IMAGE_SIGN_INFO
-
-config SPL_LOAD_FIT
- bool "Enable SPL loading U-Boot as a FIT (basic fitImage features)"
- select SPL_FIT
- help
- Normally with the SPL framework a legacy image is generated as part
- of the build. This contains U-Boot along with information as to
- where it should be loaded. This option instead enables generation
- of a FIT (Flat Image Tree) which provides more flexibility. In
- particular it can handle selecting from multiple device tree
- and passing the correct one to U-Boot.
-
-config SPL_LOAD_FIT_APPLY_OVERLAY
- bool "Enable SPL applying DT overlays from FIT"
- depends on SPL_LOAD_FIT
- select OF_LIBFDT_OVERLAY
- help
- The device tree is loaded from the FIT image. Allow the SPL is to
- also load device-tree overlays from the FIT image an apply them
- over the device tree.
-
-config SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ
- depends on SPL_LOAD_FIT_APPLY_OVERLAY
- default 0x10000
- hex "size of temporary buffer used to load the overlays"
- help
- The size of the area where the overlays will be loaded and
- uncompress. Must be at least as large as biggest overlay
- (uncompressed)
-
-config SPL_LOAD_FIT_FULL
- bool "Enable SPL loading U-Boot as a FIT (full fitImage features)"
- select SPL_FIT
- help
- Normally with the SPL framework a legacy image is generated as part
- of the build. This contains U-Boot along with information as to
- where it should be loaded. This option instead enables generation
- of a FIT (Flat Image Tree) which provides more flexibility. In
- particular it can handle selecting from multiple device tree
- and passing the correct one to U-Boot.
-
-config SPL_FIT_IMAGE_POST_PROCESS
- bool "Enable post-processing of FIT artifacts after loading by the SPL"
- depends on SPL_LOAD_FIT
- help
- Allows doing any sort of manipulation to blobs after they got extracted
- from the U-Boot FIT image like stripping off headers or modifying the
- size of the blob, verification, authentication, decryption etc. in a
- platform or board specific way. In order to use this feature a platform
- or board-specific implementation of board_fit_image_post_process() must
- be provided. Also, anything done during this post-processing step would
- need to be comprehended in how the images were prepared before being
- injected into the FIT creation (i.e. the blobs would have been pre-
- processed before being added to the FIT image).
-
-config SPL_FIT_SOURCE
- string ".its source file for U-Boot FIT image"
- depends on SPL_FIT
- help
- Specifies a (platform specific) FIT source file to generate the
- U-Boot FIT image. This could specify further image to load and/or
- execute.
-
-config SPL_FIT_GENERATOR
- string ".its file generator script for U-Boot FIT image"
- depends on SPL_FIT
- default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
- default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
- default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP
- default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV
- help
- Specifies a (platform specific) script file to generate the FIT
- source file used to build the U-Boot FIT image file. This gets
- passed a list of supported device tree file stub names to
- include in the generated image.
-
-endif # SPL
-
-endif # FIT
-
-config LEGACY_IMAGE_FORMAT
- bool "Enable support for the legacy image format"
- default y if !FIT_SIGNATURE
- help
- This option enables the legacy image format. It is enabled by
- default for backward compatibility, unless FIT_SIGNATURE is
- set where it is disabled so that unsigned images cannot be
- loaded. If a board needs the legacy image format support in this
- case, enable it here.
-
-config OF_BOARD_SETUP
- bool "Set up board-specific details in device tree before boot"
- depends on OF_LIBFDT
- help
- This causes U-Boot to call ft_board_setup() before booting into
- the Operating System. This function can set up various
- board-specific information in the device tree for use by the OS.
- The device tree is then passed to the OS.
-
-config OF_SYSTEM_SETUP
- bool "Set up system-specific details in device tree before boot"
- depends on OF_LIBFDT
- help
- This causes U-Boot to call ft_system_setup() before booting into
- the Operating System. This function can set up various
- system-specific information in the device tree for use by the OS.
- The device tree is then passed to the OS.
-
-config OF_STDOUT_VIA_ALIAS
- bool "Update the device-tree stdout alias from U-Boot"
- depends on OF_LIBFDT
- help
- This uses U-Boot's serial alias from the aliases node to update
- the device tree passed to the OS. The "linux,stdout-path" property
- in the chosen node is set to point to the correct serial node.
- This option currently references CONFIG_CONS_INDEX, which is
- incorrect when used with device tree as this option does not
- exist / should not be used.
-
-config SYS_EXTRA_OPTIONS
- string "Extra Options (DEPRECATED)"
- help
- The old configuration infrastructure (= mkconfig + boards.cfg)
- provided the extra options field. If you have something like
- "HAS_BAR,BAZ=64", the optional options
- #define CONFIG_HAS
- #define CONFIG_BAZ 64
- will be defined in include/config.h.
- This option was prepared for the smooth migration from the old
- configuration to Kconfig. Since this option will be removed sometime,
- new boards should not use this option.
-
-config HAVE_SYS_TEXT_BASE
- bool
- depends on !NIOS2 && !XTENSA
- depends on !EFI_APP
- default y
-
-config SYS_TEXT_BASE
- depends on HAVE_SYS_TEXT_BASE
- default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
- default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
- default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
- default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S
- hex "Text Base"
- help
- The address in memory that U-Boot will be running from, initially.
+config SYS_SRAM_BASE
+ hex
+ default 0x80000000 if TARGET_PIC32MZDASK
+ default 0x40200000 if TARGET_DEVKIT8000
+ default 0x40200000 if TARGET_TRICORDER
+ default 0x0
-config SYS_CLK_FREQ
- depends on ARC || ARCH_SUNXI || MPC83xx
- int "CPU clock frequency"
- help
- TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture
+config SYS_SRAM_SIZE
+ hex
+ default 0x00080000 if TARGET_PIC32MZDASK
+ default 0x10000 if TARGET_DEVKIT8000
+ default 0x10000 if TARGET_TRICORDER
+ default 0x0
-config ARCH_FIXUP_FDT_MEMORY
- bool "Enable arch_fixup_memory_banks() call"
- default y
+config EXAMPLES
+ bool "Compile API examples"
+ depends on !SANDBOX
+ default y if ARCH_QEMU
help
- Enable FDT memory map syncup before OS boot. This feature can be
- used for booting OS with different memory setup where the part of
- the memory location should be used for different purpose.
+ U-Boot provides an API for standalone applications. Examples are
+ provided in directory examples/.
-endmenu # Boot images
+endmenu # General setup
source "api/Kconfig"
source "lib/Kconfig"
source "test/Kconfig"
+
+source "tools/Kconfig"
projects / J-u-boot.git / blobdiff