board/km: drop CONFIG_KM_ROOTFSSIZE

[J-u-boot.git] / include / configs / uniphier.h

diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 55fa85ed625686401ee7ea9c1b7344595ddc7ea9..d9e95abcc121b198bf00e6e25034e42b7e0a6649 100644 (file)
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -7,10 +7,9 @@
 
 /* U-Boot - Common settings for UniPhier Family */
 
-#ifndef __CONFIG_UNIPHIER_COMMON_H__
-#define __CONFIG_UNIPHIER_COMMON_H__
+#ifndef __CONFIG_UNIPHIER_H__
+#define __CONFIG_UNIPHIER_H__
 
-#ifndef CONFIG_SPL_BUILD
 #include <config_distro_bootcmd.h>
 
 #ifdef CONFIG_CMD_MMC
@@ -20,7 +19,7 @@
 #endif
 
 #ifdef CONFIG_CMD_UBIFS
-#define BOOT_TARGET_DEVICE_UBIFS(func) func(UBIFS, ubifs, 0)
+#define BOOT_TARGET_DEVICE_UBIFS(func) func(UBIFS, ubifs, 0, UBI, boot)
 #else
 #define BOOT_TARGET_DEVICE_UBIFS(func)
 #endif
@@ -35,45 +34,8 @@
        BOOT_TARGET_DEVICE_MMC(func)    \
        BOOT_TARGET_DEVICE_UBIFS(func)  \
        BOOT_TARGET_DEVICE_USB(func)
-#else
-#define BOOTENV
-#endif
-
-#define CONFIG_ARMV7_PSCI_1_0
-
-/*-----------------------------------------------------------------------
- * MMU and Cache Setting
- *----------------------------------------------------------------------*/
-
-#define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
-
-#define CONFIG_TIMESTAMP
-
-/* FLASH related */
-
-#define CONFIG_SYS_MAX_FLASH_SECT      256
-#define CONFIG_SYS_MONITOR_BASE                0
-#define CONFIG_SYS_MONITOR_LEN         0x000d0000      /* 832KB */
-#define CONFIG_SYS_FLASH_BASE          0
-
-/*
- * flash_toggle does not work for our support card.
- * We need to use flash_status_poll.
- */
-#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
-
-#define CONFIG_FLASH_SHOW_PROGRESS     45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
-
-/* serial console configuration */
-
-#define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE            (CONFIG_SYS_CBSIZE)
 
-#define CONFIG_SYS_MMC_ENV_DEV         0
-#define CONFIG_SYS_MMC_ENV_PART                1
+#define CONFIG_SYS_MONITOR_LEN         0x00200000      /* 2MB */
 
 #if !defined(CONFIG_ARM64)
 /* Time clock 1MHz */
@@ -81,10 +43,8 @@
 #endif
 
 #define CONFIG_SYS_MAX_NAND_DEVICE                     1
-#define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_REGS_BASE                      0x68100000
 #define CONFIG_SYS_NAND_DATA_BASE                      0x68000000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS                  0
 
 /*
  * Network Configuration
@@ -94,9 +54,6 @@
 #define CONFIG_GATEWAYIP               192.168.11.1
 #define CONFIG_NETMASK                 255.255.255.0
 
-#define CONFIG_SYS_LOAD_ADDR           0x85000000
-#define CONFIG_SYS_BOOTM_LEN           (32 << 20)
-
 #if defined(CONFIG_ARM64)
 /* ARM Trusted Firmware */
 #define BOOT_IMAGES \
@@ -109,14 +66,8 @@
 #endif
 
 #define CONFIG_ROOTPATH                        "/nfs/root/path"
-#define CONFIG_NFSBOOTCOMMAND                                          \
-       "setenv bootargs $bootargs root=/dev/nfs rw "                   \
-       "nfsroot=$serverip:$rootpath "                                  \
-       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
-               "run __nfsboot"
 
 #ifdef CONFIG_FIT
-#define CONFIG_BOOTFILE                        "fitImage"
 #define KERNEL_ADDR_R_OFFSET           "0x05100000"
 #define LINUXBOOT_ENV_SETTINGS \
        "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
@@ -124,11 +75,9 @@
        "__nfsboot=run tftpboot\0"
 #else
 #ifdef CONFIG_ARM64
-#define CONFIG_BOOTFILE                        "Image"
 #define LINUXBOOT_CMD                  "booti"
 #define KERNEL_ADDR_R_OFFSET           "0x02080000"
 #else
-#define CONFIG_BOOTFILE                        "zImage"
 #define LINUXBOOT_CMD                  "bootz"
 #define KERNEL_ADDR_R_OFFSET           "0x00208000"
 #endif
@@ -218,21 +167,9 @@
 
 #define CONFIG_SYS_BOOTMAPSZ                   0x20000000
 
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_TEXT_BASE)
-
 /* only for SPL */
-#define CONFIG_SPL_STACK               (0x00200000)
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS            0x20000
 
-/* subtract sizeof(struct image_header) */
+/* subtract sizeof(struct legacy_img_hdr) */
 #define CONFIG_SYS_UBOOT_BASE                  (0x130000 - 0x40)
 
-#define CONFIG_SPL_TARGET                      "u-boot-with-spl.bin"
-#define CONFIG_SPL_MAX_FOOTPRINT               0x10000
-#define CONFIG_SPL_MAX_SIZE                    0x10000
-#define CONFIG_SPL_BSS_MAX_SIZE                        0x2000
-
-#define CONFIG_SPL_PAD_TO                      0x20000
-
-#endif /* __CONFIG_UNIPHIER_COMMON_H__ */
+#endif /* __CONFIG_UNIPHIER_H__ */